K1Guitar/AT32F403ARCT7_BOOT/AT32F403ARCT7_BOOT.ATWP

<?xml version="1.0" encoding="UTF-8"?>
<Root>
    <MCUInfo>
        <MCUSerials>AT32F403A</MCUSerials>
        <MCUName>AT32F403ARCT7</MCUName>
        <MCUPackage>LQFP64</MCUPackage>
    </MCUInfo>
    <ACC>
        <Mode>
            <ModeSub name="ACC_State" value="TRUE"/>
        </Mode>
    </ACC>
    <CRM>
        <Mode>
            <ModeSub name="HEXT" value="HEXT-External-Oscillator"/>
        </Mode>
        <Parameters>
            <ParametersSub name="HEXT" value="HEXT_CRYSTAL"/>
        </Parameters>
    </CRM>
    <DEBUG>
        <Mode>
            <ModeSub name="Debug interface" value="SWD"/>
        </Mode>
    </DEBUG>
    <SPI1>
        <Mode>
            <ModeSub name="Mode" value="Full_Duplex_Master"/>
        </Mode>
        <Parameters>
            <ParametersSub name="TransmissionMode" value="SPI_TRANSMIT_FULL_DUPLEX"/>
            <ParametersSub name="Mode" value="SPI_MODE_MASTER"/>
            <ParametersSub name="FirstBit" value="SPI_FIRST_BIT_MSB"/>
            <ParametersSub name="ClockFrequency" value="30000000"/>
        </Parameters>
    </SPI1>
    <SPI2>
        <Mode>
            <ModeSub name="Mode" value="Full_Duplex_Master"/>
            <ModeSub name="CS_Signal" value="CS_Signal_Hard_Output"/>
        </Mode>
        <Parameters>
            <ParametersSub name="TransmissionMode" value="SPI_TRANSMIT_FULL_DUPLEX"/>
            <ParametersSub name="Mode" value="SPI_MODE_MASTER"/>
            <ParametersSub name="FirstBit" value="SPI_FIRST_BIT_MSB"/>
            <ParametersSub name="ClockFrequency" value="30000000"/>
            <ParametersSub name="VirtualCS" value="SPI_CS_HARDWARE_MODE"/>
        </Parameters>
    </SPI2>
    <SYSTEM>
        <Mode>
            <ModeSub name="Time_Base" value="SysTick"/>
        </Mode>
    </SYSTEM>
    <USBFS>
        <Mode>
            <ModeSub name="Device" value="TRUE"/>
        </Mode>
    </USBFS>
    <USB_DEVICE>
        <Mode>
            <ModeSub name="FS_Device" value="MSC"/>
        </Mode>
        <Parameters>
            <ParametersSub name="DEVICE_FS1_VID" value="0x5259"/>
            <ParametersSub name="DEVICE_FS1_PID_MSC" value="0x414E"/>
            <ParametersSub name="DEVICE_FS1_Manufacturer" value="SoundWalker"/>
            <ParametersSub name="DEVICE_FS1_Product_MSC" value="SoundWalker Mass Storage"/>
            <ParametersSub name="DEVICE_FS1_Configuration_MSC" value="SoundWalker Storage Config"/>
            <ParametersSub name="DEVICE_FS1_Interface_MSC" value="SoundWalker Storage Interface"/>
        </Parameters>
    </USB_DEVICE>
    <NVIC>
        <SysTick_Handler>1;15;0;0;0</SysTick_Handler>
        <FLASH_IRQHandler>0;0;0;0;0</FLASH_IRQHandler>
        <CRM_IRQHandler>0;0;0;0;0</CRM_IRQHandler>
        <SPI1_IRQHandler>0;0;0;0;0</SPI1_IRQHandler>
        <SPI2_I2S2EXT_IRQHandler>0;0;0;0;0</SPI2_I2S2EXT_IRQHandler>
        <USBFSWakeUp_IRQHandler>0;0;0;0;0</USBFSWakeUp_IRQHandler>
        <ACC_IRQHandler>0;0;0;0;0</ACC_IRQHandler>
        <USBFS_MAPH_IRQHandler>0;0;0;0;0</USBFS_MAPH_IRQHandler>
        <USBFS_MAPL_IRQHandler>1;0;0;0;0</USBFS_MAPL_IRQHandler>
    </NVIC>
    <ClockConfiguration>
        <rtcsel>0</rtcsel>
        <hext>12.000000</hext>
        <hextdiv>2</hextdiv>
        <pllhextdiv>0</pllhextdiv>
        <pllrcs>0</pllrcs>
        <pllmult>20</pllmult>
        <sclkselect>1</sclkselect>
        <ahbdiv>1</ahbdiv>
        <apb1div>2</apb1div>
        <apb2div>2</apb2div>
        <usbdiv>4.0</usbdiv>
        <hicktousb>1</hicktousb>
        <hicktosclk>0</hicktosclk>
        <clkout>0</clkout>
        <clkoutdiv>1</clkoutdiv>
        <adcdiv>6</adcdiv>
        <systicsel>8</systicsel>
    </ClockConfiguration>
    <PINInfo>
        <PinSub pinname="PD0/HEXT_IN" signalname="CRM_HEXT_IN" signaltype="2"/>
        <PinSub pinname="PD1/HEXT_OUT" signalname="CRM_HEXT_OUT" signaltype="2"/>
        <PinSub pinname="PA5" signalname="SPI1_SCK" signaltype="2"/>
        <PinSub pinname="PA6" signalname="SPI1_MISO" signaltype="2"/>
        <PinSub pinname="PA7" signalname="SPI1_MOSI" signaltype="2"/>
        <PinSub pinname="PB12" signalname="SPI2_CS" signaltype="2"/>
        <PinSub pinname="PB13" signalname="SPI2_SCK" signaltype="2"/>
        <PinSub pinname="PB14" signalname="SPI2_MISO" signaltype="2"/>
        <PinSub pinname="PB15" signalname="SPI2_MOSI" signaltype="2"/>
        <PinSub pinname="PA11" signalname="USBFS_D-" signaltype="2"/>
        <PinSub pinname="PA12" signalname="USBFS_D+" signaltype="2"/>
        <PinSub pinname="PA13" signalname="DEBUG_JTMS_SWDIO" signaltype="2"/>
        <PinSub pinname="PA14" signalname="DEBUG_JTCK_SWCLK" signaltype="2"/>
    </PINInfo>
    <ProjectInfomation>
        <ProjectName>AT32F403ARCT7_BOOT</ProjectName>
        <ProjectLocation>C:/Users/19665/Desktop/test/YNGJ-GT1-M</ProjectLocation>
        <ToolchainIDE>IAR_V7.4</ToolchainIDE>
        <ARMCompiler>0</ARMCompiler>
        <KeepUserCode>true</KeepUserCode>
        <NotUsedPinAnalog>false</NotUsedPinAnalog>
        <CodeSplitIP>true</CodeSplitIP>
        <AddNecessaryFileFlag>true</AddNecessaryFileFlag>
        <MinHeapSize>0x200</MinHeapSize>
        <MinStackSize>0x400</MinStackSize>
        <UseFirmware>true</UseFirmware>
        <PackageVersion>V2.2.2</PackageVersion>
    </ProjectInfomation>
</Root>