fix(power): prevent charge-boot long-press from auto power-off

Consume the same power-key hold used for soft-off charge boot before setting powon, and ignore stale POWOFF_CHARG after power-on so mode select stays on screen.

Co-authored-by: Cursor <cursoragent@cursor.com>

APP/app_adc.c

@@ -263,7 +263,9 @@ static void app_adc_charge_process(void)
             {
                 /* 通知 UI 熄灭充电页并关主电 */
                 MainTask_Sendmsg(MSG_ID_POWOFF_CHARG, percentage, 0, 0);
-                BSP_MainPowerEnable(0);
+                /* 发消息可能让出 CPU：关电前再确认仍未开机，避免切断开机主电 */
+                if (!powon)
+                    BSP_MainPowerEnable(0);
             }
         }
     }

Global/Global.c

@@ -211,6 +211,8 @@ void System_PowerOn(void)
   LOG_I("PWR", "power_on begin");
   s_pwr_rails_cut = 0u;
   s_pwr_off_grace_ms = 0u;
+  /* 本次长按已用于开机：先消耗，再置 powon，防止 TMR7 ISR 把同一按压力即判为关机 */
+  Power_Key_ConsumePress();
   /* 控制电源硬件；蓝牙按 NVM/系统设置开关恢复，勿强制常开 */
   BSP_MainPowerEnable(1);
   BSP_DreamCorePowerEnable(1);
@@ -317,10 +319,18 @@ void System_PowerOff_Poll(void)
  * TMR7 1ms（优先级高于伴奏 TMR6）：与主循环解耦的关机键扫描。
  * 正常：请求优雅关机；超时未切轨 → 紧急断电并复位。
  */
+static uint16_t s_isr_hold_ms = 0;
+static uint8_t  s_isr_fired = 0;
+
+/* 开机时消耗本次按键：同一次长按已用于开机，须松开后重新长按 2s 才关机。
+ * 须在 powon 置 true 前调用，避免 ISR 在开机瞬间把本次长按误判为关机。 */
+void Power_Key_ConsumePress(void)
+{
+  s_isr_fired = 1;
+}
+
 void Power_Key_IsrTick(void)
 {
-  static uint16_t isr_hold_ms = 0;
-  static uint8_t  isr_fired = 0;
   flag_status st;
 
   /* RTT/USB 烧 ExtFlash 期间禁止软关机，避免长按/粘键打断 FLASH_ACK */
@@ -331,19 +341,19 @@ void Power_Key_IsrTick(void)
 
   if (st == KEY_PRESS_LEVEL)
   {
-    if (isr_hold_ms < 60000u)
-      isr_hold_ms++;
+    if (s_isr_hold_ms < 60000u)
+      s_isr_hold_ms++;
   }
   else
   {
-    isr_hold_ms = 0;
-    isr_fired = 0;
+    s_isr_hold_ms = 0;
+    s_isr_fired = 0;
   }
 
   /* 仅处理「开机态关机」；开机仍由主循环负责（需完整外设初始化） */
-  if (powon && !isr_fired && isr_hold_ms >= PWR_OFF_HOLD_MS)
+  if (powon && !s_isr_fired && s_isr_hold_ms >= PWR_OFF_HOLD_MS)
   {
-    isr_fired = 1;
+    s_isr_fired = 1;
     System_RequestPowerOff();
   }
 

Global/Global.h

@@ -169,6 +169,7 @@ void Power_Key_Scan(void);
 void Power_Key_IsrTick(void);
 void Power_Key_FaultLoop(void);
 void Power_Key_WatchdogInit(void);
+void Power_Key_ConsumePress(void);
 void PowerOff_CutRails(void);
 void AutoPowerOff_Scan(void);
 void System_PowerOn(void);

UI/UI_Idle.c

@@ -141,22 +141,25 @@ void Touch_Mode_Select_Action(int8_t FLAG, uint8_t ID, uint8_t areaIndex)
 }
    
 extern uint8_t bat_init_done;
+/* 关机充电页已绘制标志：POWER_ON 需清除，以便再次软关机充电时重绘 */
+static bool s_charge_ui_drawn = false;
 void IdleProcess(DisplayTaskMessage_Type msg)
 { 
-    uint8_t vol;
     switch (msg.MessageType)
     {
-        case MSG_ID_POWER_ON : 
+        case MSG_ID_POWER_ON :
+            /* 充电软关机开机：滞后的拔电消息可能已切主电/关显示，强制恢复 */
+            BSP_MainPowerEnable(1);
+            LCD_WR_REG(0x29); /* Display ON */
+            s_charge_ui_drawn = false;
             LCD_BLK_Set();
             LCD_WR_PIC_FROM_FLASH(0, 0, UI0902_BOOT_LOGO_W, UI0902_BOOT_LOGO_H,
                                   UI0902_BOOT_LOGO_ADDR);
-            BSP_SelectAdcChannel(6);
             /* 让出 CPU，避免忙等卡住触摸/主循环线程 */
             rt_thread_mdelay(1000);
             LoadConfig();
-            vol = ADC_ReadChannel(ADC_CHANNEL_1)>>5;
-            app_adc_sync_volume(vol);
-            Send_volume(vol);
+            /* 主音量不在此现场切通道读 ADC（会与扫描任务串通道）：
+             * 待 StartScanTask 后由 MasterVolume_Reapply 统一补发 */
 
             UI_DrawModeSelectScreen();
             TM1629D_AllLedOn(LED_COLOR_G);
@@ -227,7 +230,9 @@ void IdleProcess(DisplayTaskMessage_Type msg)
 
         case MSG_ID_POWOFF_CHARG:
         {
-            static bool s_charge_ui_drawn = false;
+            /* 已开机：忽略滞后的关机充电消息，勿覆盖模式选择页或切断主电 */
+            if (powon)
+                break;
             if(!s_charge_ui_drawn)
             {
                 uint8_t peek[4];