fix(ui): keep the boot logo until the light show finishes

Mode select was covering the logo before the side lights played. Firmware is 0.2.52.

Co-authored-by: Cursor <cursoragent@cursor.com>

Global/Global.c

@@ -111,7 +111,7 @@ int16_t MIC_VOL_MAP[11]= {-9000,-7000,-5000,-3000,-1000,1000,3000,5000,7000,9000
 
 uint8_t TOUCH_AREA_NUM = (sizeof(Touch_Areas)/sizeof(Touch_AreaTypeDef));
 
-const uint8_t Version[3] = {0,2,51}; /* major.minor.patch — 0.2.51: 低于 6.8V 不亮开机灯、不初始化音源 */
+const uint8_t Version[3] = {0,2,52}; /* major.minor.patch — 0.2.52: 开机 Logo 保持到彩灯结束再进模式选择 */
 uint8_t Led = 8;
 bool PressFlag = 0;
 

UI/UI_Idle.c

@@ -179,17 +179,21 @@ extern uint8_t bat_init_done;
 static bool s_charge_ui_drawn = false;
 static uint8_t s_boot_led_done = 0;
 
-/* 包电压已高于 6.8V 才点侧灯并给音源板上电。电压未知或仍低电时直接返回。 */
+/* Logo 保持到彩灯结束再进模式选择。电压未知或仍低于 6.8V 时留在 Logo，不点灯。 */
 static void UI_BeginPerformancePower(void)
 {
-    if (!powon || !app_adc_charge_ui_allowed())
-        return;
-    if (!s_boot_led_done)
+    if (!powon || !app_adc_charge_ui_allowed() || s_boot_led_done)
     {
+        if (powon && app_adc_charge_ui_allowed())
+            System_RequestAudioBringUp();
+        return;
+    }
     s_boot_led_done = 1;
     UI_BootLedShow();
-    }
     System_RequestAudioBringUp();
+    UI_DrawModeSelectScreen();
+    StartTouchTask();
+    Draw_Volume_Bar(UI0902_VOL_X, UI0902_VOL_Y, level, 1, WHITE, GRAY);
 }
 void IdleProcess(DisplayTaskMessage_Type msg)
 { 
@@ -202,16 +206,12 @@ void IdleProcess(DisplayTaskMessage_Type msg)
             s_charge_ui_drawn = false;
             LCD_BLK_Set();
             s_boot_led_done = 0;
-            /* 高于 6.8V 才与彩灯并行给音源板上电；否则只留屏幕，等电压起来再补 */
+            /* 先留 Logo。彩灯（蓝→青→红→绿，约 1.1s）播完才进模式选择 */
             LCD_WR_PIC_FROM_FLASH(0, 0, UI0902_BOOT_LOGO_W, UI0902_BOOT_LOGO_H,
                                   UI0902_BOOT_LOGO_ADDR);
-            UI_BeginPerformancePower();
-
-            UI_DrawModeSelectScreen();
-            /* 先启动触摸再返回，功放初始化改到主循环，避免 UI 堵在 I2C 里点击无响应 */
-            StartTouchTask();
+            /* 扫描先跑，才能采到包电压。电压已高于 6.8V 时这里就播彩灯并切模式页 */
             StartScanTask();
-            Draw_Volume_Bar(UI0902_VOL_X, UI0902_VOL_Y, level, 1, WHITE, GRAY);
+            UI_BeginPerformancePower();
         break;
 
         case MSG_ID_HEAVY_BOOT:
@@ -275,6 +275,8 @@ void IdleProcess(DisplayTaskMessage_Type msg)
         break;
 
         case MSG_ID_BATTERY_VALUE:
+            if (!s_boot_led_done)
+                break;
             Draw_Status_Battery_Icon(msg.ID);
 	    break;
 
@@ -353,8 +355,10 @@ void IdleProcess(DisplayTaskMessage_Type msg)
         
 	case MSG_ID_EC_VOL:
 	{
-            /* 主音量已在 MainTask 下发；此处只刷新条 */
+            /* 主音量已在 MainTask 下发；Logo 期间不画音量条 */
             level = msg.HiByte;
+            if (!s_boot_led_done)
+                break;
             Draw_Volume_Bar(UI0902_VOL_X, UI0902_VOL_Y, level, 1, WHITE, GRAY);
             ResetAutoPowerCount();
 	}

tools/publish_k1_release.py

@@ -38,7 +38,7 @@ TONE_HDR = PROJ / "project" / "inc" / "ExtFlash_Tone_Addr.h"
 IAP_DIR = REPO / "升级" / "MCU主控升级"
 OUT_ROOT = REPO / "tools" / "out"
 
-FW_VER = "0.2.51"
+FW_VER = "0.2.52"
 UI0902_RES_BASE = 0x00100000
 BOOT_FLASH_ADDR = 0x08000000
 APP_FLASH_ADDR = 0x08008000