Fix IAR Target to Cortex-M4 core so builds work without ArteryTek Device pack.

Switch OGCoreOrChip to core mode and set J-Link flash device to Cortex-M4 to avoid CMSIS Unknown target when the chip is not selected in the IDE.

Co-authored-by: Cursor <cursoragent@cursor.com>

AT32F403ARCT7_BOOT/project/IAR_V7.4/AT32F403ARCT7_BOOT.ewp

@@ -55,7 +55,7 @@
         </option>
         <option>
           <name>OGCoreOrChip</name>
-          <state>1</state>
+          <state>0</state>
         </option>
         <option>
           <name>GRuntimeLibSelect</name>

project/IAR_V7.4/YNGJ-GT1-M.ewp

@@ -55,7 +55,7 @@
         </option>
         <option>
           <name>OGCoreOrChip</name>
-          <state>1</state>
+          <state>0</state>
         </option>
         <option>
           <name>GRuntimeLibSelect</name>
@@ -1039,7 +1039,7 @@
         </option>
         <option>
           <name>OGCoreOrChip</name>
-          <state>1</state>
+          <state>0</state>
         </option>
         <option>
           <name>GRuntimeLibSelect</name>

project/IAR_V7.4/settings/YNGJ-GT1-M_YNGJ-GT1-M.jlink

@@ -7,13 +7,13 @@ BPDuringExecution = 0
 CFISize = 0x00
 CFIAddr = 0x00
 [CPU]
-MonModeVTableAddr = 0xFFFFFFFF
-MonModeDebug = 0
-MaxNumAPs = 0
 LowPowerHandlingMode = 0
 OverrideMemMap = 0
 AllowSimulation = 1
 ScriptFile=""
+MonModeVTableAddr = 0xFFFFFFFF
+MonModeDebug = 0
+MaxNumAPs = 0
 [FLASH]
 CacheExcludeSize = 0x00
 CacheExcludeAddr = 0x00
@@ -22,8 +22,8 @@ SkipProgOnCRCMatch = 1
 VerifyDownload = 1
 AllowCaching = 1
 EnableFlashDL = 2
-Override = 0
+Override = 1
-Device="ARM7"
+Device="Cortex-M4"
 [GENERAL]
 WorkRAMSize = 0x00
 WorkRAMAddr = 0x00