The charging glyph kept a fixed yellow bar. Clear that bar from the icon and paint the cavity from the current percent, in the same yellow as the bolt.
Co-authored-by: Cursor <cursoragent@cursor.com>
Match the requirement screen using the settings-hub method, and keep the glyphs 1-bit so the image still fits in application flash.
Co-authored-by: Cursor <cursoragent@cursor.com>
Bump firmware to 0.2.30. The 11px font now has the update glyphs, and the flashed boot image stays in USB programming when that mode is saved.
Co-authored-by: Cursor <cursoragent@cursor.com>
Match the card box to the reference, put the value on the same center line as the arrow and plus-minus chips, and use MiSans for the 16px digits.
Co-authored-by: Cursor <cursoragent@cursor.com>
Remove divider lines, add language and USB-update confirm pages, and store both in NVM so boot can enter IAP.
Co-authored-by: Cursor <cursoragent@cursor.com>
Replace the old 11x17 glyph and gray slash with dedicated on 13x20 and off 19x20 assets from the 0923 pack.
Co-authored-by: Cursor <cursoragent@cursor.com>
Replace the status-bar outline+fill with the 0918 lightning battery bitmap while charging, and fix Pre-Build git version script UTF-8 decoding on Chinese Windows.
Co-authored-by: Cursor <cursoragent@cursor.com>
Settings showed only 关 because GBK 闭 was absent from CHS font tables; append WenQuanYi bitmaps for all sizes and keep the patch helper.
Co-authored-by: Cursor <cursoragent@cursor.com>
Enlarge BT recv stack, move large handlers/log buffers off the stack, clamp key indexes, and yield in W25Q busy-wait so BLE protocol tests stay stable.
Co-authored-by: Cursor <cursoragent@cursor.com>
Drop the hand-tuned/mislabeled variants; use the 9pt Song bitmap that matched the first-version 弦音色选择 look.
Co-authored-by: Cursor <cursoragent@cursor.com>
Keep GBK D4F1 mapping but revert glyph data to the pre-regeneration art that matched the known-good UI look.
Co-authored-by: Cursor <cursoragent@cursor.com>
Label-size 择 was inset and hard to read; scale the clear 16px bitmap into each size so it matches neighbors edge-to-edge.
Co-authored-by: Cursor <cursoragent@cursor.com>
Font table had wrongly mapped GBK 议 (D2E9) as 择; remap to D4F1 and regenerate the MiSans glyph so 弦音色选择/歌曲选择 render fully.
Co-authored-by: Cursor <cursoragent@cursor.com>
Replace settings-hub mixer/gear bitmaps, and show Boot IAP screen from UI0902_FLASH_MODE in external Flash.
Co-authored-by: Cursor <cursoragent@cursor.com>
Raise ascii_115 '4' to match '5' height, nudge auto-off digits down 2px, and align version box / restore chevron to the shared val_x2 right edge.
Co-authored-by: Cursor <cursoragent@cursor.com>
Use correct BT/restore glyphs and triangle steppers, put version periods on the baseline, and center auto-off minutes between the triangles.
Co-authored-by: Cursor <cursoragent@cursor.com>
Single-tap mode entry, hide top separator and row artifact line, center battery with vol/BT, and make % match digit height.
Co-authored-by: Cursor <cursoragent@cursor.com>
Keep L/R walls when generating the outline asset, tighten fill to the cavity, and nudge the icon up so the bottom edge is not clipped.
Co-authored-by: Cursor <cursoragent@cursor.com>
Regenerate ascii_1608 from LiberationSans and lower binarization threshold so E/A/B strokes stay complete when switching keys.
Co-authored-by: Cursor <cursoragent@cursor.com>
Use 1-bit RGB565 labels for 取消/确认 to avoid font corruption, and map autoclose to 15/30/45/60/off per the user manual.
Co-authored-by: Cursor <cursoragent@cursor.com>
Correct GBK codes for 取/消 so Cancel text shows; draw mixer back bitmap on mixer/settings/restore headers.
Co-authored-by: Cursor <cursoragent@cursor.com>
UI shows LocalSongNames instead of bare indices; pack regenerates the header; WQY font gains the four display characters.
Co-authored-by: Cursor <cursoragent@cursor.com>
Settings hub/mixer/system/restore match 0904 layouts; regenerate Chinese bitmaps without shrinking native 16px cells so strokes stay continuous.
Co-authored-by: Cursor <cursoragent@cursor.com>
Replace the mistaken fill bitmap that embedded "80%" text with a solid level bar, right-align size-9 "N%" with reserved 100% width, and refresh Free/Expert battery updates.
Co-authored-by: Cursor <cursoragent@cursor.com>
Move KEY/BPM values and chevrons toward mode.png rhythm, drop musical-flat b and digit dilation so Db and body digits stay complete without looking bold.
Co-authored-by: Cursor <cursoragent@cursor.com>
Liberation C is 10px wide; packing into 8px crushed hero values. Keep ascii_1608 symbol with 32-byte glyphs.
Co-authored-by: Cursor <cursoragent@cursor.com>
Regenerate size 13/16 WQY/Liberation cells with edge margin and a fuller flat for Cb, and bump ASCII advance so chord numbers match mode.png spacing.
Co-authored-by: Cursor <cursoragent@cursor.com>
Match mode.png: widen card value slots, use ASCII advance spacing so 1364 is not cramped, and draw the section/nav divider line.
Co-authored-by: Cursor <cursoragent@cursor.com>
Replace drawn chevrons on transpose/song/timbre rows with 控件-11/12 solid triangle bitmaps from the 0902 asset pack.
Co-authored-by: Cursor <cursoragent@cursor.com>
Use Liberation Sans for KEY/BPM/Db with wider ASCII cells, redraw KEY/BPM after value refresh, and reuse the centered timbre layout on refresh so a second line no longer appears.
Co-authored-by: Cursor <cursoragent@cursor.com>
Save current UI textbox layout and font regen so we can restore with
git reset --hard checkpoint/misans-before-wqy if MicroHei trial fails.
Co-authored-by: Cursor <cursoragent@cursor.com>
Apply label/body/hero hierarchy (11/13/16), enlarge section digits to 13, and switch the bottom bar to 万能|普通|专业|设置 while keeping touch/key logic.
Co-authored-by: Cursor <cursoragent@cursor.com>
Use size-12 tabs with full 节/类/型/地/目 coverage, denser MiSans bitmaps, dark row chrome, and safer section-label draw order; skip ASCII regen by default.
Co-authored-by: Cursor <cursoragent@cursor.com>
Widen TAB text margins at 11px, regenerate section/timbre labels, and regenerate MiSans bitmaps with padding so strokes are not cut.
Co-authored-by: Cursor <cursoragent@cursor.com>
Enable TP_MIRROR_X for left/right hits, draw blue numeric mixer knobs, and restyle system settings rows with title order and chevron values.
Co-authored-by: Cursor <cursoragent@cursor.com>
Fill three mode rows to the screen bottom without a nav bar, and fix the status bar to one volume meter, centered Bluetooth, and battery percentage.
Co-authored-by: Cursor <cursoragent@cursor.com>
- Mode select page draws 222x84 row bitmaps from external flash
- Mixer page uses flash track/knob images with picture labels
- Settings and restore pages re-laid out with 0902 row style
- New status bar icons and battery outline+clip fill rendering
- Add LCD_WR_PIC_ClipX and LCD_WR_PIC_FROM_FLASH_Trans draw APIs
- Replace 4-tab bar with GUI_NAV_BAR 3-icon bottom navigation
- Swap 0831 assets for UI0902 in the IAR project file
Co-authored-by: Cursor <cursoragent@cursor.com>
yuquanjun