TM1617 keys injected fake touches at y=255 which slammed mixer sliders to 1. Lock the pressed fader until release and shrink overlapping hit boxes.
Co-authored-by: Cursor <cursoragent@cursor.com>
Loop_Light_Handle was hardcoding red for every measure; map L1-L7 to the same R/G/B/yellow/purple/cyan/white table as App guide LEDs.
Co-authored-by: Cursor <cursoragent@cursor.com>
Problem2: in song mode UI shows 6m(Am) but MIDI played AM7
(E2 A2 E3 G#3 C#4 E4). Root cause: BL_Set_led wrote the LED frame's
chord code into chord_type_index_map of the group middle key
(LED_L6 -> key17), so a guidance frame carrying 0x02 (M7) turned the
Am key into AM7. Remapping on the chord page only helped until the
next LED frame.
- BL_Set_led: light LED only, drop all chord_type_index_map writes;
chord quality is owned by map page 02 03/02 04 (BT_Chord_offset_map)
- handleReadRhythmMap / Return_Light_buff: fix type->protocol read-back
encoding (m7->0x0A, M7->0x02, ad9->0x04, m7-5->0x0B, sus2->0x1F,
sus4->0x1E), re-landing the 0917 verified fix
- BT_Chord_offset_map: accept dominant-7 doc code 0x0D (legacy 0x13 kept)
- tests: test_chord_map_fix.py (16/16 PASS on device),
test_fret_positions.py, test_problem2_song_am.py (7/7 PASS:
post-LED strum stays E2 A2 E3 A3 C4 E4)
Co-authored-by: Cursor <cursoragent@cursor.com>
Low-battery shutdown below 6.2V with tip screen and 10s soft power-off; UI0902 includes LOWBAT_TIP fullscreen asset.
Co-authored-by: Cursor <cursoragent@cursor.com>
Stop all sound, show UI0902 LOWBAT_TIP fullscreen, then soft-off after 10s. Skip while charging; speed up ADC sampling near empty. Pack new tip bitmap into ExtFlash UI0902 map.
Co-authored-by: Cursor <cursoragent@cursor.com>
Disable LOOP_LIGHT rhythm chasing in free mode so LEDs stay solid green instead of moving with the beat.
Co-authored-by: Cursor <cursoragent@cursor.com>
Free-mode even-beat release stop; keep fret KEY_ID during wind-down so register octave does not jump up before stop. Also includes universal outro all-green LED and expert local-song continue after section+fret.
Co-authored-by: Cursor <cursoragent@cursor.com>
In normal mode, releasing the fretboard now finishes the current beat-pair (beat 1→end of 2, beat 3→end of 4) instead of cutting immediately.
Co-authored-by: Cursor <cursoragent@cursor.com>
Keep fretboard LEDs all green during outro, and for expert local songs treat section-key + fret changes as continuous chord updates like rhythm mode (no mid-session Stop).
Co-authored-by: Cursor <cursoragent@cursor.com>
Include Type-C charging battery icon and BLE timbre/style UI sync fix already on develop; add RTT midi/string inject helpers for mic pitch calibration. Tone pack remains 0916_bank.
Co-authored-by: Cursor <cursoragent@cursor.com>
Stop accompaniment on mode/song switch; restore all-green LEDs when leaving universal; default pick/preamble to current-key I chord after soft boot.
Co-authored-by: Cursor <cursoragent@cursor.com>
Apply Accomp_ApplyDefaultIChord before SyncStart on preamble, on soft power-on/mode enter/nav switch, and on pick fallback. Reset TM1629 key edge state so soft-off residual key_last cannot stick a prior fret.
Co-authored-by: Cursor <cursoragent@cursor.com>
Use Stop_AutoBand (engine stop + all-channel AllNotesOff) when changing nav mode, reloading tone presets, switching songs/progressions, or returning to mode select. Also fix AllNotesOff to address all 16 MIDI channels.
Co-authored-by: Cursor <cursoragent@cursor.com>
Consume the same power-key hold used for soft-off charge boot before setting powon, and ignore stale POWOFF_CHARG after power-on so mode select stays on screen.
Co-authored-by: Cursor <cursoragent@cursor.com>
Require fretboard in normal mode per manual; use SetPiecePlayMode for 1.bin. ACK ui boot/charge before full-screen draw, add RTT flash all and tone pick free, and skip soft-off while ExtFlash transfer is busy.
Co-authored-by: Cursor <cursoragent@cursor.com>
TMR7 high-prio watchdog and fault-loop emergency cut/reset so soft-off still works if the main loop or AutoBand ISR dies; skip start when preset load fails.
Co-authored-by: Cursor <cursoragent@cursor.com>
Require left-hand pad held (PressFlag) before pick starts; skip the default I-chord fallback in normal mode. Release (key 0) stops AutoBand immediately instead of looping.
Co-authored-by: Cursor <cursoragent@cursor.com>
Ignore TM1629 keys 0-21 in universal so pad no longer changes KEY_ID or arms OutTime_Stop; keep tap-tempo and stop. Clear stale KEY_ID/PressFlag when entering universal tab.
Co-authored-by: Cursor <cursoragent@cursor.com>
Exit piece mode before Postamble so universal chord loops can switch into the style outro stage once 3.bin has PostambleMIDI.
Co-authored-by: Cursor <cursoragent@cursor.com>
Bump firmware version after BT recv stack/log fixes and pitch/chord bounds so Phoenix Atelier map/LED traffic no longer stack-smashes the MCU.
Co-authored-by: Cursor <cursoragent@cursor.com>
Enlarge BT recv stack, move large handlers/log buffers off the stack, clamp key indexes, and yield in W25Q busy-wait so BLE protocol tests stay stable.
Co-authored-by: Cursor <cursoragent@cursor.com>
Update pack/publish to enforce 41KB song limit, verify 1/2/3.bin at fixed addresses, and emit .res aliases for the tone and ALL extflash images.
Co-authored-by: Cursor <cursoragent@cursor.com>
Point system-settings rows at the correct Flash icons, keep Main/UI alive across soft-off, and expose git build id for 01 0C with matching BLE tests.
Co-authored-by: Cursor <cursoragent@cursor.com>
TaskBTRecvThread previously started only after mode select, so GATT SysEx never reached the parser until then; verified BLE-MIDI 01 01 now replies with GATT notify.
Co-authored-by: Cursor <cursoragent@cursor.com>
Font table had wrongly mapped GBK 议 (D2E9) as 择; remap to D4F1 and regenerate the MiSans glyph so 弦音色选择/歌曲选择 render fully.
Co-authored-by: Cursor <cursoragent@cursor.com>
Reuse the unused Language slot as BluetoothSW, sync top-bar icon from the saved switch, and keep factory restore defaulting Bluetooth to on.
Co-authored-by: Cursor <cursoragent@cursor.com>
Sync faders on shutdown and re-apply LoadConfig after DSP boot so
saved mixer levels and master pot stay consistent after power-off.
Co-authored-by: Cursor <cursoragent@cursor.com>
Drive measure-synced Loop_Light for TAB 0 (and settings entered from it) using the same 1645/1564/1364 rules as normal mode.
Co-authored-by: Cursor <cursoragent@cursor.com>
When no left-hand chord is selected, Pick_Handle uses index-1 major (same as preamble) so strumming still starts Autoband.
Co-authored-by: Cursor <cursoragent@cursor.com>
PowerOff was calling nvic_system_reset after cutting rails, and boot auto power-on made it look like a restart.
Co-authored-by: Cursor <cursoragent@cursor.com>
Centers 40/100/160/210, SECTION_Y 231, and SET_ROW 16x207 so play/settings pages match the standard art.
Co-authored-by: Cursor <cursoragent@cursor.com>
UI shows LocalSongNames instead of bare indices; pack regenerates the header; WQY font gains the four display characters.
Co-authored-by: Cursor <cursoragent@cursor.com>
Pick fires on downstroke; #IV drops an octave; local songs use 2.bin; transpose updates notes without restart; intro starts on key I; boot string volume/PC corrected.
Co-authored-by: Cursor <cursoragent@cursor.com>
Settings hub/mixer/system/restore match 0904 layouts; regenerate Chinese bitmaps without shrinking native 16px cells so strokes stay continuous.
Co-authored-by: Cursor <cursoragent@cursor.com>
Match card/row/section positions and sizes from the 240x320 reference, restore 16px hero values, and place the 和弦走向 title above the row like timbre.
Co-authored-by: Cursor <cursoragent@cursor.com>
Apply measured 240x320 geometry for cards, tabs, rows, and section buttons, and recenter text so KEY/BPM, battery %, and row labels no longer clip.
Co-authored-by: Cursor <cursoragent@cursor.com>
Apply label/body/hero hierarchy (11/13/16), enlarge section digits to 13, and switch the bottom bar to 万能|普通|专业|设置 while keeping touch/key logic.
Co-authored-by: Cursor <cursoragent@cursor.com>
Use size-12 tabs with full 节/类/型/地/目 coverage, denser MiSans bitmaps, dark row chrome, and safer section-label draw order; skip ASCII regen by default.
Co-authored-by: Cursor <cursoragent@cursor.com>
Widen TAB text margins at 11px, regenerate section/timbre labels, and regenerate MiSans bitmaps with padding so strokes are not cut.
Co-authored-by: Cursor <cursoragent@cursor.com>
- Mode select page draws 222x84 row bitmaps from external flash
- Mixer page uses flash track/knob images with picture labels
- Settings and restore pages re-laid out with 0902 row style
- New status bar icons and battery outline+clip fill rendering
- Add LCD_WR_PIC_ClipX and LCD_WR_PIC_FROM_FLASH_Trans draw APIs
- Replace 4-tab bar with GUI_NAV_BAR 3-icon bottom navigation
- Swap 0831 assets for UI0902 in the IAR project file
Co-authored-by: Cursor <cursoragent@cursor.com>
Preserve focus across redraws, improve XPT2046 sampling, and log touch coords via RTT for ongoing debug.
Co-authored-by: Cursor <cursoragent@cursor.com>
Only the focused control uses the blue gradient; unfocused widgets use the dark normal background. Drop invalid Commander commands from IAR jlink_script_file to stop V5.10m parse popups.
Co-authored-by: Cursor <cursoragent@cursor.com>
Regenerate Chinese/English font tables, extend LCD driver for new sizes, and update screen layouts; add gen_misans_font.py for reproducible font builds.
Co-authored-by: Cursor <cursoragent@cursor.com>
yuquanjun