III-VII shapes use the C-major sequence column with the same fixed-key offset as the strings. Chord tones follow the decimal column. Bump firmware to 0.2.57.
Co-authored-by: Cursor <cursoragent@cursor.com>
Stop adding transpose to every string and AutoBand tone. Each degree now uses the C-major source fret from the sheet, with +1 only where the sheet marks it.
Co-authored-by: Cursor <cursoragent@cursor.com>
Keep the last 1/2/3 fill on screen, and leave neck lights all green in normal and expert unless the app is guiding them.
Co-authored-by: Cursor <cursoragent@cursor.com>
A protected pack only trickle-charges, so Dream, the 12V rail, and the amp stay off until the pack is above 6.8V. Firmware is 0.2.51.
Co-authored-by: Cursor <cursoragent@cursor.com>
Dream power-up now overlaps the boot light show. Mode keys, the pick, and side keys stay ignored until MIDI config has been sent, so a fast tap cannot play before the board is ready.
Co-authored-by: Cursor <cursoragent@cursor.com>
Boot and song changes use the universal and rhythm BPM tables, with style 20 at 91. Factory restore and power-on now follow the persistence sheet, and the firmware version is 0.2.49.
Co-authored-by: Cursor <cursoragent@cursor.com>
Bump firmware to 0.2.44 so slot 1 stays Bank1 program 24 and slot 2 stays program 25. Rhythm presets no longer replace the string voice on channel 0.
Co-authored-by: Cursor <cursoragent@cursor.com>
Hold master mute from shortly after the boost turns on through EQ setup, then let the chip fade in so boot does not pop.
Co-authored-by: Cursor <cursoragent@cursor.com>
Bring up 12V and Dream together after the boot lights, then configure the amp a single time so the string tone stays intact and the unmute write is not lost.
Co-authored-by: Cursor <cursoragent@cursor.com>
Show the real battery percent, shut down at 6.8V even while Type-C is connected, and leave the charge screen dark so it does not drain the pack. Initialize the amplifier only after the 12V rail has settled.
Co-authored-by: Cursor <cursoragent@cursor.com>
Bump firmware to 0.2.31. Skip the color LED sequence on USB power-on so a depleted pack can leave the logo screen and charge normally.
Co-authored-by: Cursor <cursoragent@cursor.com>
Bump firmware to 0.2.30. The 11px font now has the update glyphs, and the flashed boot image stays in USB programming when that mode is saved.
Co-authored-by: Cursor <cursoragent@cursor.com>
Match the card box to the reference, put the value on the same center line as the arrow and plus-minus chips, and use MiSans for the 16px digits.
Co-authored-by: Cursor <cursoragent@cursor.com>
Remove divider lines, add language and USB-update confirm pages, and store both in NVM so boot can enter IAP.
Co-authored-by: Cursor <cursoragent@cursor.com>
Centralize idle-timer reset on touch/volume/tap/transpose in UI task, and on pick, fretboard, side keys, round keys, and string NoteOn. Pause auto power-off countdown while accompaniment is playing.
Co-authored-by: Cursor <cursoragent@cursor.com>
Restore hard AutoBandTop1_Stop and drop eaten-start/followup tick-gate.
Keep API stubs for callers. Block TM1617 round keys and reinforce side-key/BLE gates while InModeFlag is false.
Co-authored-by: Cursor <cursoragent@cursor.com>
NavBar no longer forces I after stop; remember context before leave and prefer saved fret chord on no-fret pick.
Co-authored-by: Cursor <cursoragent@cursor.com>
Normal-mode pick with no fret held applies the last expert stop transpose, starts on I, and arms even-beat stop if idle.
Co-authored-by: Cursor <cursoragent@cursor.com>
yuquanjun