/*
 * @Author: CTW
 * @Date: 2025-11-07 14:37:14
 * @FilePath: \PhoenixSMGT_Testproject\Drivers\LCD_ILI9341\Drv_ILI9341_Lcd_Init.h
 */
#ifndef __DRV_ILI9341_LCD_INIT_H
#define __DRV_ILI9341_LCD_INIT_H

#include "includes.h"
//#include "spi.h"

#define USE_HORIZONTAL 0  //设置横屏或者竖屏显示 0或1为竖屏 2或3为横屏

#if USE_HORIZONTAL==0||USE_HORIZONTAL==1
#define LCD_W 240
#define LCD_H 320

#else
#define LCD_W 320
#define LCD_H 240
#endif

//电阻屏芯片连接引脚
// SPI2引脚（复用功能）
#define LCD_SCK_PIN    GPIO_PINS_13
#define LCD_SCK_PORT   GPIOB
#define LCD_MOSI_PIN   GPIO_PINS_15
#define LCD_MOSI_PORT  GPIOB
#define LCD_MISO_PIN   GPIO_PINS_14
#define LCD_MISO_PORT  GPIOB
#define LCD_NSS_PIN    GPIO_PINS_12
#define LCD_NSS_PORT   GPIOB

// LCD控制引脚
#define LCD_DC_PIN     GPIO_PINS_8   // TFT_RS
#define LCD_DC_PORT    GPIOA
#define LCD_BLK_PIN    GPIO_PINS_9   // TFT_BL
#define LCD_BLK_PORT   GPIOC
#define LCD_RES_PIN    GPIO_PINS_10  // TFT_RESET
#define LCD_RES_PORT   GPIOA

// SPI句柄（使用SPI2）
//extern SPI_HandleTypeDef hspi2;


// 引脚电平操作宏
#define LCD_CS_Clr()   HAL_GPIO_WritePin(LCD_NSS_PORT, LCD_NSS_PIN, GPIO_PIN_RESET)
#define LCD_CS_Set()   HAL_GPIO_WritePin(LCD_NSS_PORT, LCD_NSS_PIN, GPIO_PIN_SET)
#define LCD_DC_Clr()   HAL_GPIO_WritePin(LCD_DC_PORT, LCD_DC_PIN, GPIO_PIN_RESET)
#define LCD_DC_Set()   HAL_GPIO_WritePin(LCD_DC_PORT, LCD_DC_PIN, GPIO_PIN_SET)
#define LCD_BLK_Clr()  HAL_GPIO_WritePin(LCD_BLK_PORT, LCD_BLK_PIN, GPIO_PIN_RESET)
#define LCD_BLK_Set()  HAL_GPIO_WritePin(LCD_BLK_PORT, LCD_BLK_PIN, GPIO_PIN_SET)
#define LCD_RES_Clr()  HAL_GPIO_WritePin(LCD_RES_PORT, LCD_RES_PIN, GPIO_PIN_RESET)
#define LCD_RES_Set()  HAL_GPIO_WritePin(LCD_RES_PORT, LCD_RES_PIN, GPIO_PIN_SET)

//画笔颜色
#define WHITE         	 0xFFFF
#define BLACK         	 0x0000	  
#define BLUE           	 0x001F  
#define COLOR_PRIMARY       0x1B9F  // #1D73FF MiSans UI 主色
#define COLOR_GRAD_START    0x01D5  // #003AAE 规范渐变起始（深蓝）
#define COLOR_GRAD_MID      0x029A  // #034FD6 规范渐变中间
#define COLOR_GRAD_END      0x431E  // #4161F8 规范渐变结束（中蓝）
#define COLOR_BG_START      0x10A6  // #0E1535 屏幕背景渐变顶
#define COLOR_BG_END        0x31A9  // #2F3647 屏幕背景渐变底
#define COLOR_MIXER_RED     0xF2E9  // #F85E4B 弦音色槽位红
#define COLOR_MIXER_ORANGE  0xF4C5  // #F59C2C 伴奏槽位橙
#define COLOR_MIXER_YELLOW  0xF6C7  // #F3D939 导奏槽位黄
#define COLOR_MIXER_GREEN   0x170F  // #13E17F 鼓音槽位绿
#define BRED             0XF81F
#define GRED 			 0XFFE0
#define GBLUE			 0X07FF
#define RED           	 0xF800
#define MAGENTA       	 0xF81F
#define GREEN         	 0x07E0
#define CYAN          	 0x7FFF
#define YELLOW        	 0xFFE0
#define BROWN 			 0XBC40 //棕色
#define BRRED 			 0XFC07 //棕红色
#define GRAY  			 0X8430 //灰色
#define DARKBLUE      	 0X01CF	//深蓝色
#define LIGHTBLUE      	 0X7D7C	//浅蓝色  
#define GRAYBLUE       	 0X5458 //灰蓝色
#define LIGHTGREEN     	 0X841F //浅绿色
#define LGRAY 			 0XC618 //浅灰色(PANNEL),窗体背景色
#define LGRAYBLUE        0XA651 //浅灰蓝色(中间层颜色)
#define LBBLUE           0X2B12 //浅棕蓝色(选择条目的反色)


#define DARKLGRAY        0x2968  // #292C42 控件未选中（暗蓝灰，对应规范非焦点背景）
#define COLOR_NORMAL_BG  DARKLGRAY   /* 控件普通状态背景 */
#define BUTTON_COLOR     /*0x5AEB*/BLACK
  
#define START_COLOR    COLOR_GRAD_START
#define END_COLOR      COLOR_GRAD_END
extern void LCD_GPIO_Init(void);                                                 //初始化GPIO
extern void LCD_WR_DATA8(uint8_t data);                                          //写入一个字节
extern void LCD_WR_DATA16(uint16_t data);                                        //写入两个字节
extern void LCD_WR_REG(uint8_t reg);                                             //写入一个指令
extern void LCD_SetWindow(uint16_t x1, uint16_t y1, uint16_t x2, uint16_t y2);   //设置坐标函数
extern void LCD_Init(void);                                                      //LCD初始化
extern void LCD_SPI_DMA_Send(const uint8_t *data, uint32_t len);                 //SPI2 DMA批量发送
extern void LCD_DrawChevron_Right(uint16_t x, uint16_t y, uint8_t size, uint8_t thick, uint16_t color); //向右空心尖括号

// 渐变背景文字显示（先画垂直渐变底，再叠加文字笔画）
extern uint32_t LCD_ShowChinese_AutoAlign_Gradient(uint16_t x1, uint16_t x2, uint16_t y,
    const uint8_t *p, uint8_t align, uint16_t fc,
    uint16_t color_top, uint16_t color_bottom, uint8_t size);
extern uint16_t LCD_ShowString_AutoAlign_Gradient(uint16_t x1, uint16_t x2, uint16_t y,
    const uint8_t *p, uint8_t align, uint16_t fc,
    uint16_t color_top, uint16_t color_bottom, uint8_t size);

#endif