qjyu
/
OrangePi_CM5
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
OrangePi_CM5/drivers/gpu/drm/tilcdc/Makefile

17 lines
328 B
Makefile
Raw Normal View History

drivers/gpu/drm/tilcdc: Makefile, only -Werror when no -W* in EXTRA_CFLAGS When make with EXTRA_CFLAGS=-W, it will report error. so give a check in Makefile. Signed-off-by: Chen Gang <gang.chen@asianux.com> Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Acked-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-03-10 13:04:13 +08:00
ifeq (, $(findstring -W,$(EXTRA_CFLAGS)))
ccflags-y += -Werror
endif
drm/tilcdc: add TI LCD Controller DRM driver (v4) A simple DRM/KMS driver for the TI LCD Controller found in various smaller TI parts (AM33xx, OMAPL138, etc). This driver uses the CMA helpers. Currently only the TFP410 DVI encoder is supported (tested with beaglebone + DVI cape). There are also various LCD displays, for which support can be added (as I get hw to test on), and an external i2c HDMI encoder found on some boards. The display controller supports a single CRTC. And the encoder+ connector are split out into sub-devices. Depending on which LCD or external encoder is actually present, the appropriate output module(s) will be loaded. v1: original v2: fix fb refcnting and few other cleanups v3: get +/- vsync/hsync from timings rather than panel-info, add option DT max-bandwidth field so driver doesn't attempt to pick a display mode with too high memory bandwidth, and other small cleanups v4: remove some unneeded stuff from panel-info struct, properly set high bits for hfp/hsw/hbp for rev 2, add DT bindings docs Signed-off-by: Rob Clark <robdclark@gmail.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Tested-by: Koen Kooi <koen@dominion.thruhere.net>
2013-01-09 05:04:28 +08:00
drm/tilcdc: Add DRM_TILCDC_SLAVE_COMPAT for ti,tilcdc,slave binding support Adds a CONFIG_DRM_TILCDC_SLAVE_COMPAT module for "ti,tilcdc,slave" node conversion. The implementation is in tilcdc_slave_compat.c and it uses tilcdc_slave_compat.dts as a basis for creating a DTS overlay. The DTS overlay adds an external tda998x encoder to tilcdc that corresponds to the old tda998x based slave encoder. Signed-off-by: Jyri Sarha <jsarha@ti.com> Acked-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2015-02-18 17:24:03 +08:00
obj-$(CONFIG_DRM_TILCDC_SLAVE_COMPAT) += tilcdc_slave_compat.o \
tilcdc_slave_compat.dtb.o
drm/tilcdc: add TI LCD Controller DRM driver (v4) A simple DRM/KMS driver for the TI LCD Controller found in various smaller TI parts (AM33xx, OMAPL138, etc). This driver uses the CMA helpers. Currently only the TFP410 DVI encoder is supported (tested with beaglebone + DVI cape). There are also various LCD displays, for which support can be added (as I get hw to test on), and an external i2c HDMI encoder found on some boards. The display controller supports a single CRTC. And the encoder+ connector are split out into sub-devices. Depending on which LCD or external encoder is actually present, the appropriate output module(s) will be loaded. v1: original v2: fix fb refcnting and few other cleanups v3: get +/- vsync/hsync from timings rather than panel-info, add option DT max-bandwidth field so driver doesn't attempt to pick a display mode with too high memory bandwidth, and other small cleanups v4: remove some unneeded stuff from panel-info struct, properly set high bits for hfp/hsw/hbp for rev 2, add DT bindings docs Signed-off-by: Rob Clark <robdclark@gmail.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Tested-by: Koen Kooi <koen@dominion.thruhere.net>
2013-01-09 05:04:28 +08:00
tilcdc-y := \
drm/tilcdc: Add dummy primary plane implementation Add dummy primary plane implementation. LCDC does not really have planes, only simple framebuffer that is mandatory. This primary plane implementation has the necessary checks for implementing simple framebuffer trough DRM plane abstraction. For setting the actual framebuffer the implementation relies on a CRTC side function. Signed-off-by: Jyri Sarha <jsarha@ti.com>
2016-04-07 19:52:02 +08:00
tilcdc_plane.o \
drm/tilcdc: add TI LCD Controller DRM driver (v4) A simple DRM/KMS driver for the TI LCD Controller found in various smaller TI parts (AM33xx, OMAPL138, etc). This driver uses the CMA helpers. Currently only the TFP410 DVI encoder is supported (tested with beaglebone + DVI cape). There are also various LCD displays, for which support can be added (as I get hw to test on), and an external i2c HDMI encoder found on some boards. The display controller supports a single CRTC. And the encoder+ connector are split out into sub-devices. Depending on which LCD or external encoder is actually present, the appropriate output module(s) will be loaded. v1: original v2: fix fb refcnting and few other cleanups v3: get +/- vsync/hsync from timings rather than panel-info, add option DT max-bandwidth field so driver doesn't attempt to pick a display mode with too high memory bandwidth, and other small cleanups v4: remove some unneeded stuff from panel-info struct, properly set high bits for hfp/hsw/hbp for rev 2, add DT bindings docs Signed-off-by: Rob Clark <robdclark@gmail.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Tested-by: Koen Kooi <koen@dominion.thruhere.net>
2013-01-09 05:04:28 +08:00
tilcdc_crtc.o \
tilcdc_tfp410.o \
drm/tilcdc: add support for LCD panels (v5) Add an output panel driver for LCD panels. Tested with LCD3 cape on beaglebone. v1: original v2: s/of_find_node_by_name()/of_get_child_by_name()/ from Pantelis Antoniou v3: add backlight support v4: rebase to latest of video timing helpers v5: remove some unneeded fields from panel-info struct, add DT bindings docs Signed-off-by: Rob Clark <robdclark@gmail.com> Tested-by: Koen Kooi <koen@dominion.thruhere.net>
2012-12-19 07:34:16 +08:00
tilcdc_panel.o \
drm/tilcdc: Add support for external tda998x encoder Add support for an external compontised DRM encoder. The external encoder can be connected to tilcdc trough device tree graph binding. The binding document for tilcdc has been updated. The current implementation supports only tda998x encoder. To be able to filter out the unsupported video modes the tilcdc driver needs to hijack the external connectors helper functions. The tilcdc installes new helper functions that are otherwise identical to orignals, but the mode_valid() call-back check the mode first localy, before calling the original call-back. The tilcdc dirver restores the original helper functions before it is unbound from the external device. I got the idea and some lines of code from Jean-Francois Moine's "drm/tilcdc: Change the interface with the tda998x driver"-patch. Signed-off-by: Jyri Sarha <jsarha@ti.com> Acked-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2015-02-10 20:13:23 +08:00
tilcdc_external.o \
drm/tilcdc: add TI LCD Controller DRM driver (v4) A simple DRM/KMS driver for the TI LCD Controller found in various smaller TI parts (AM33xx, OMAPL138, etc). This driver uses the CMA helpers. Currently only the TFP410 DVI encoder is supported (tested with beaglebone + DVI cape). There are also various LCD displays, for which support can be added (as I get hw to test on), and an external i2c HDMI encoder found on some boards. The display controller supports a single CRTC. And the encoder+ connector are split out into sub-devices. Depending on which LCD or external encoder is actually present, the appropriate output module(s) will be loaded. v1: original v2: fix fb refcnting and few other cleanups v3: get +/- vsync/hsync from timings rather than panel-info, add option DT max-bandwidth field so driver doesn't attempt to pick a display mode with too high memory bandwidth, and other small cleanups v4: remove some unneeded stuff from panel-info struct, properly set high bits for hfp/hsw/hbp for rev 2, add DT bindings docs Signed-off-by: Rob Clark <robdclark@gmail.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Tested-by: Koen Kooi <koen@dominion.thruhere.net>
2013-01-09 05:04:28 +08:00
tilcdc_drv.o
obj-$(CONFIG_DRM_TILCDC) += tilcdc.o