Add raspi-config

external/cache/sources/raspi-config/LICENSE

@@ -0,0 +1,26 @@
+raspi-config is licensed under the terms of the MIT license reproduced below.
+
+#####################################################
+
+Copyright (c) 2012 Alex Bradbury <asb@asbradbury.org>
+
+Permission is hereby granted, free of charge, to any person
+obtaining a copy of this software and associated documentation
+files (the "Software"), to deal in the Software without
+restriction, including without limitation the rights to use,
+copy, modify, merge, publish, distribute, sublicense, and/or sell
+copies of the Software, and to permit persons to whom the
+Software is furnished to do so, subject to the following
+conditions:
+
+The above copyright notice and this permission notice shall be
+included in all copies or substantial portions of the Software.
+
+THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+OTHER DEALINGS IN THE SOFTWARE.

external/cache/sources/raspi-config/autologin@.service

@@ -0,0 +1,47 @@
+#  This file is part of systemd.
+#
+#  systemd is free software; you can redistribute it and/or modify it
+#  under the terms of the GNU Lesser General Public License as published by
+#  the Free Software Foundation; either version 2.1 of the License, or
+#  (at your option) any later version.
+
+[Unit]
+Description=Getty on %I
+Documentation=man:agetty(8) man:systemd-getty-generator(8)
+Documentation=http://0pointer.de/blog/projects/serial-console.html
+After=systemd-user-sessions.service plymouth-quit-wait.service
+After=rc-local.service
+
+# If additional gettys are spawned during boot then we should make
+# sure that this is synchronized before getty.target, even though
+# getty.target didn't actually pull it in.
+Before=getty.target
+IgnoreOnIsolate=yes
+
+# On systems without virtual consoles, don't start any getty. Note
+# that serial gettys are covered by serial-getty@.service, not this
+# unit.
+ConditionPathExists=/dev/tty0
+
+[Service]
+# the VT is cleared by TTYVTDisallocate
+ExecStart=-/sbin/agetty --autologin pi --noclear %I $TERM
+Type=idle
+Restart=always
+RestartSec=0
+UtmpIdentifier=%I
+TTYPath=/dev/%I
+TTYReset=yes
+TTYVHangup=yes
+TTYVTDisallocate=yes
+KillMode=process
+IgnoreSIGPIPE=no
+SendSIGHUP=yes
+
+# Unset locale for the console getty since the console has problems
+# displaying some internationalized messages.
+Environment=LANG= LANGUAGE= LC_CTYPE= LC_NUMERIC= LC_TIME= LC_COLLATE= LC_MONETARY= LC_MESSAGES= LC_PAPER= LC_NAME= LC_ADDRESS= LC_TELEPHONE= LC_MEASUREMENT= LC_IDENTIFICATION=
+
+[Install]
+WantedBy=getty.target
+DefaultInstance=tty1

external/cache/sources/raspi-config/debian/.gitignore

@@ -0,0 +1,6 @@
+debhelper-build-stamp
+files
+*.debhelper.log
+*.debhelper
+*.substvars
+raspi-config/

external/cache/sources/raspi-config/debian/compat

@@ -0,0 +1 @@
+10

external/cache/sources/raspi-config/debian/control

@@ -0,0 +1,15 @@
+Source: raspi-config
+Section: utils
+Priority: optional
+Maintainer: Serge Schneider <serge@raspberrypi.com>
+Build-Depends: debhelper (>= 8.0.0)
+Standards-Version: 4.3.0
+Vcs-Git: git://git@github.com:RPi-Distro/raspi-config.git
+Vcs-Browser: https://github.com/RPi-Distro/raspi-config
+
+Package: raspi-config
+Architecture: all
+Depends: ${misc:Depends}, whiptail, parted, lua5.1, alsa-utils, psmisc, initramfs-tools
+Recommends: triggerhappy, iw, crda
+Description: Raspberry Pi configuration tool
+ A simple configuration tool for common Raspberry Pi administrative tasks

external/cache/sources/raspi-config/debian/copyright

@@ -0,0 +1,25 @@
+Format: https://www.debian.org/doc/packaging-manuals/copyright-format/1.0/
+Source: https://github.com/RPi-Distro/raspi-config
+
+Files: *
+Copyright: 2012 Alex Bradbury <asb@asbradbury.org>
+License: MIT
+
+License: MIT
+ Permission is hereby granted, free of charge, to any person obtaining a copy
+ of this software and associated documentation files (the "Software"), to
+ deal in the Software without restriction, including without limitation the
+ rights to use, copy, modify, merge, publish, distribute, sublicense, and/or
+ sell copies of the Software, and to permit persons to whom the Software is
+ furnished to do so, subject to the following conditions:
+ .
+ The above copyright notice and this permission notice shall be included in
+ all copies or substantial portions of the Software.
+ .
+ THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ SOFTWARE.

external/cache/sources/raspi-config/debian/raspi-config.init

@@ -0,0 +1,57 @@
+#!/bin/sh
+### BEGIN INIT INFO
+# Provides:          raspi-config
+# Required-Start: udev mountkernfs $remote_fs
+# Required-Stop:
+# Default-Start: S 2 3 4 5
+# Default-Stop:
+# Short-Description: Switch to ondemand cpu governor (unless shift key is pressed)
+# Description:
+### END INIT INFO
+
+. /lib/lsb/init-functions
+
+if [ -f /etc/default/cpu_governor ]; then
+  . /etc/default/cpu_governor
+fi
+
+CPU_DEFAULT_GOVERNOR="${CPU_DEFAULT_GOVERNOR:-ondemand}"
+CPU_ONDEMAND_UP_THRESHOLD="${CPU_ONDEMAND_UP_THRESHOLD:-50}"
+CPU_ONDEMAND_SAMPLING_RATE="${CPU_ONDEMAND_SAMPLING_RATE:-100000}"
+CPU_ONDEMAND_DOWN_SAMPLING_FACTOR="${CPU_ONDEMAND_DOWN_SAMPLING_FACTOR:-50}"
+CPU_ONDEMAND_INCLUDE_IO_CALC="${CPU_ONDEMAND_INCLUDE_IO_CALC:-0}"
+
+case "$1" in
+  start)
+    log_daemon_msg "Checking if shift key is held down"
+    if [ -x /usr/sbin/thd ] && timeout 1 thd --dump /dev/input/event* | grep -q "LEFTSHIFT\|RIGHTSHIFT"; then
+      printf " Yes. Not enabling $CPU_DEFAULT_GOVERNOR scaling governor"
+      log_end_msg 0
+    else
+      printf " No. Switching to $CPU_DEFAULT_GOVERNOR scaling governor"
+      SYS_CPUFREQ_GOVERNOR=/sys/devices/system/cpu/cpu0/cpufreq/scaling_governor
+      if [ -e $SYS_CPUFREQ_GOVERNOR ]; then
+        for cpu_core in /sys/devices/system/cpu/cpu?/cpufreq/scaling_governor ; do
+          echo "$CPU_DEFAULT_GOVERNOR" > $cpu_core
+        done
+        if [ "$CPU_DEFAULT_GOVERNOR" = "ondemand" ]; then
+          echo "$CPU_ONDEMAND_UP_THRESHOLD" > /sys/devices/system/cpu/cpufreq/ondemand/up_threshold
+          echo "$CPU_ONDEMAND_SAMPLING_RATE" > /sys/devices/system/cpu/cpufreq/ondemand/sampling_rate
+          echo "$CPU_ONDEMAND_DOWN_SAMPLING_FACTOR" > /sys/devices/system/cpu/cpufreq/ondemand/sampling_down_factor
+          echo "$CPU_ONDEMAND_INCLUDE_IO_CALC" > /sys/devices/system/cpu/cpufreq/ondemand/io_is_busy
+        fi
+      fi
+      log_end_msg 0
+    fi
+    ;;
+  stop)
+    ;;
+  restart)
+    ;;
+  force-reload)
+    ;;
+  *)
+    echo "Usage: $0 start" >&2
+    exit 3
+    ;;
+esac

external/cache/sources/raspi-config/debian/raspi-config.install

@@ -0,0 +1,3 @@
+raspi-config /usr/bin
+usr/
+etc/

external/cache/sources/raspi-config/debian/raspi-config.postinst

@@ -0,0 +1,33 @@
+#!/bin/sh
+
+if [ -e /etc/init.d/switch_cpu_governor ]; then
+  update-rc.d switch_cpu_governor remove >/dev/null
+fi
+
+if dpkg --compare-versions "${2}" lt-nl "20170619"; then
+  update-rc.d -f raspi-config remove
+fi
+
+if dpkg --compare-versions "${2}" lt-nl "20220804"; then
+  echo "Moving to crda for regulatory domain management..."
+  if [ -f /etc/wpa_supplicant/wpa_supplicant.conf ]; then
+    REGDOMAIN="$(sed -n 's/^country=\(.*\)$/\1/p' /etc/wpa_supplicant/wpa_supplicant.conf)"
+    if [ -n "$REGDOMAIN" ]; then
+      echo "Setting to $REGDOMAIN..."
+      raspi-config nonint do_wifi_country "$REGDOMAIN"
+    else
+      echo "Regulatory domain was unset"
+    fi
+  else
+    echo "wpa_cupplicant.conf not found"
+  fi
+fi
+
+if dpkg --compare-versions "${2}" lt-nl "20220907+1"; then
+  IMG_VER="$(grep -s -m1 -o '[[:digit:]]\{4\}-[[:digit:]]\{2\}-[[:digit:]]\{2\}' /etc/rpi-issue)"
+  if [ "$IMG_VER" = "2022-09-06" ] && [ -f /2 ]; then
+    rm -f /2
+  fi
+fi
+
+#DEBHELPER#

external/cache/sources/raspi-config/debian/raspi-config.postrm

@@ -0,0 +1,20 @@
+#!/bin/sh
+set -e
+
+case "$1" in
+    remove|upgrade|failed-upgrade|abort-install|abort-upgrade|disappear)
+    ;;
+    purge)
+        if [ -d /etc/X11/xorg.conf.d/ ]; then
+                rmdir --ignore-fail-on-non-empty /etc/X11/xorg.conf.d/
+        fi
+        ;;
+    *)
+        echo "postrm called with unknown argument \`$1'" >&2
+        exit 1
+    ;;
+esac
+
+#DEBHELPER#
+
+exit 0

external/cache/sources/raspi-config/debian/raspi-config.prerm

@@ -0,0 +1,36 @@
+#! /bin/sh
+# prerm script for raspi-config
+#
+# see: dh_installdeb(1)
+
+set -e
+
+# summary of how this script can be called:
+#        * <prerm> `remove'
+#        * <prerm> `purge'
+#        * <old-prerm> `upgrade' <new-version>
+#        * <new-prerm> `failed-upgrade' <old-version>
+#        * <new-prerm> `abort-install'
+#        * <new-prerm> `abort-install' <old-version>
+#        * <new-prerm> `abort-upgrade' <old-version>
+#        * <disappearer's-prerm> `disappear' <overwriter> <new-version>
+# for details, see http://www.debian.org/doc/debian-policy/ or
+# the debian-policy package
+
+
+case "$1" in
+	purge|remove|upgrade)
+		;;
+
+	failed-upgrade|abort-install|abort-upgrade|disappear)
+		;;
+
+	*)
+		echo "prerm called with unknown argument \`$1'" >&2
+		exit 1
+		;;
+esac
+
+#DEBHELPER#
+
+exit 0

external/cache/sources/raspi-config/debian/rules

@@ -0,0 +1,16 @@
+#!/usr/bin/make -f
+# -*- makefile -*-
+# Sample debian/rules that uses debhelper.
+# This file was originally written by Joey Hess and Craig Small.
+# As a special exception, when this file is copied by dh-make into a
+# dh-make output file, you may use that output file without restriction.
+# This special exception was added by Craig Small in version 0.37 of dh-make.
+
+# Uncomment this to turn on verbose mode.
+#export DH_VERBOSE=1
+
+override_dh_installinit:
+	dh_installinit --no-start
+
+%:
+	dh $@ 

external/cache/sources/raspi-config/debian/source/format

@@ -0,0 +1 @@
+3.0 (native)

external/cache/sources/raspi-config/etc/default/cpu_governor

@@ -0,0 +1,35 @@
+#
+# Set default governor on all CPU cores.
+# More info https://www.kernel.org/doc/Documentation/cpu-freq/governors.txt
+#
+# CPU_DEFAULT_GOVERNOR="ondemand"
+#
+
+#
+# ondemand governor: This defines what the average CPU usage between the
+# samplings of 'sampling_rate' needs to be for the kernel to make a decision
+# on whether it should increase the frequency.
+# 
+# CPU_ONDEMAND_UP_THRESHOLD=50
+#
+
+#
+# ondemand governor: How often you want the kernel to look at the CPU usage
+# and to make decisions on what to do about the frequency.
+#
+# CPU_ONDEMAND_SAMPLING_RATE=100000
+#
+
+#
+# ondemand governor: The rate at which the kernel makes a decision on when to
+# decrease the frequency while running at top speed
+#
+# CPU_ONDEMAND_DOWN_SAMPLING_FACTOR=50
+#
+
+#
+# ondemand governor: Include Input/Output (I/O) activity into CPU activity
+# calculations when using ondemand CPU governor
+#
+# CPU_ONDEMAND_INCLUDE_IO_CALC=0
+#

external/cache/sources/raspi-config/etc/sudoers.d/010_proxy

@@ -0,0 +1,5 @@
+Defaults env_keep += "http_proxy HTTP_PROXY"
+Defaults env_keep += "https_proxy HTTPS_PROXY"
+Defaults env_keep += "ftp_proxy FTP_PROXY"
+Defaults env_keep += "RSYNC_PROXY"
+Defaults env_keep += "no_proxy NO_PROXY"

external/cache/sources/raspi-config/usr/lib/raspi-config/cmstart.sh

@@ -0,0 +1,6 @@
+#!/bin/sh
+if raspi-config nonint is_kms ; then
+    if ps ax | grep -v grep | grep -q openbox ; then
+        exec xcompmgr -aR
+    fi
+fi

external/cache/sources/raspi-config/usr/lib/raspi-config/init_resize.sh

@@ -0,0 +1,227 @@
+#!/bin/sh
+
+reboot_pi () {
+  umount /boot
+  mount / -o remount,ro
+  sync
+  if [ "$NOOBS" = "1" ]; then
+    if [ "$NEW_KERNEL" = "1" ]; then
+      reboot -f "$BOOT_PART_NUM"
+      sleep 5
+    else
+      echo "$BOOT_PART_NUM" > "/sys/module/${BCM_MODULE}/parameters/reboot_part"
+    fi
+  fi
+  reboot -f
+  sleep 5
+  exit 0
+}
+
+check_commands () {
+  if ! command -v whiptail > /dev/null; then
+      echo "whiptail not found"
+      sleep 5
+      return 1
+  fi
+  for COMMAND in grep cut sed parted fdisk findmnt; do
+    if ! command -v $COMMAND > /dev/null; then
+      FAIL_REASON="$COMMAND not found"
+      return 1
+    fi
+  done
+  return 0
+}
+
+check_noobs () {
+  if [ "$BOOT_PART_NUM" = "1" ]; then
+    NOOBS=0
+  else
+    NOOBS=1
+  fi
+}
+
+get_variables () {
+  ROOT_PART_DEV=$(findmnt / -o source -n)
+  ROOT_PART_NAME=$(echo "$ROOT_PART_DEV" | cut -d "/" -f 3)
+  ROOT_DEV_NAME=$(echo /sys/block/*/"${ROOT_PART_NAME}" | cut -d "/" -f 4)
+  ROOT_DEV="/dev/${ROOT_DEV_NAME}"
+  ROOT_PART_NUM=$(cat "/sys/block/${ROOT_DEV_NAME}/${ROOT_PART_NAME}/partition")
+
+  BOOT_PART_DEV=$(findmnt /boot -o source -n)
+  BOOT_PART_NAME=$(echo "$BOOT_PART_DEV" | cut -d "/" -f 3)
+  BOOT_DEV_NAME=$(echo /sys/block/*/"${BOOT_PART_NAME}" | cut -d "/" -f 4)
+  BOOT_PART_NUM=$(cat "/sys/block/${BOOT_DEV_NAME}/${BOOT_PART_NAME}/partition")
+
+  OLD_DISKID=$(fdisk -l "$ROOT_DEV" | sed -n 's/Disk identifier: 0x\([^ ]*\)/\1/p')
+
+  check_noobs
+
+  ROOT_DEV_SIZE=$(cat "/sys/block/${ROOT_DEV_NAME}/size")
+  TARGET_END=$((ROOT_DEV_SIZE - 1))
+
+  PARTITION_TABLE=$(parted -m "$ROOT_DEV" unit s print | tr -d 's')
+
+  LAST_PART_NUM=$(echo "$PARTITION_TABLE" | tail -n 1 | cut -d ":" -f 1)
+
+  ROOT_PART_LINE=$(echo "$PARTITION_TABLE" | grep -e "^${ROOT_PART_NUM}:")
+  ROOT_PART_START=$(echo "$ROOT_PART_LINE" | cut -d ":" -f 2)
+  ROOT_PART_END=$(echo "$ROOT_PART_LINE" | cut -d ":" -f 3)
+
+  if [ "$NOOBS" = "1" ]; then
+    EXT_PART_LINE=$(echo "$PARTITION_TABLE" | grep ":::;" | head -n 1)
+    EXT_PART_NUM=$(echo "$EXT_PART_LINE" | cut -d ":" -f 1)
+    EXT_PART_START=$(echo "$EXT_PART_LINE" | cut -d ":" -f 2)
+    EXT_PART_END=$(echo "$EXT_PART_LINE" | cut -d ":" -f 3)
+  fi
+}
+
+fix_partuuid() {
+  mount -o remount,rw "$ROOT_PART_DEV"
+  mount -o remount,rw "$BOOT_PART_DEV"
+  DISKID="$(tr -dc 'a-f0-9' < /dev/hwrng | dd bs=1 count=8 2>/dev/null)"
+  fdisk "$ROOT_DEV" > /dev/null <<EOF
+x
+i
+0x$DISKID
+r
+w
+EOF
+  if [ "$?" -eq 0 ]; then
+    sed -i "s/${OLD_DISKID}/${DISKID}/g" /etc/fstab
+    sed -i "s/${OLD_DISKID}/${DISKID}/" /boot/cmdline.txt
+    sync
+  fi
+
+  mount -o remount,ro "$ROOT_PART_DEV"
+  mount -o remount,ro "$BOOT_PART_DEV"
+}
+
+fix_wpa() {
+  if [ -e /boot/firstrun.sh ] \
+     && ! grep -q 'imager_custom set_wlan' /boot/firstrun.sh \
+     && grep -q wpa_supplicant.conf /boot/firstrun.sh; then
+    mount -o remount,rw "$ROOT_PART_DEV"
+    modprobe rfkill
+    REGDOMAIN=$(sed -n 's/^\s*country=\(..\)$/\1/p' /boot/firstrun.sh)
+    [ -n "$REGDOMAIN" ] && raspi-config nonint do_wifi_country "$REGDOMAIN"
+    if systemctl -q is-enabled NetworkManager; then
+      systemctl disable NetworkManager
+    fi
+    mount -o remount,ro "$ROOT_PART_DEV"
+  fi
+}
+
+check_variables () {
+  if [ "$NOOBS" = "1" ]; then
+    if [ "$EXT_PART_NUM" -gt 4 ] || \
+       [ "$EXT_PART_START" -gt "$ROOT_PART_START" ] || \
+       [ "$EXT_PART_END" -lt "$ROOT_PART_END" ]; then
+      FAIL_REASON="Unsupported extended partition"
+      return 1
+    fi
+  fi
+
+  if [ "$BOOT_DEV_NAME" != "$ROOT_DEV_NAME" ]; then
+      FAIL_REASON="Boot and root partitions are on different devices"
+      return 1
+  fi
+
+  if [ "$ROOT_PART_NUM" -ne "$LAST_PART_NUM" ]; then
+    FAIL_REASON="Root partition should be last partition"
+    return 1
+  fi
+
+  if [ "$ROOT_PART_END" -gt "$TARGET_END" ]; then
+    FAIL_REASON="Root partition runs past the end of device"
+    return 1
+  fi
+
+  if [ ! -b "$ROOT_DEV" ] || [ ! -b "$ROOT_PART_DEV" ] || [ ! -b "$BOOT_PART_DEV" ] ; then
+    FAIL_REASON="Could not determine partitions"
+    return 1
+  fi
+}
+
+check_kernel () {
+  MAJOR="$(uname -r | cut -f1 -d.)"
+  MINOR="$(uname -r | cut -f2 -d.)"
+  if [ "$MAJOR" -eq "4" ] && [ "$MINOR" -lt "9" ]; then
+    return 0
+  fi
+  if [ "$MAJOR" -lt "4" ]; then
+    return 0
+  fi
+  NEW_KERNEL=1
+}
+
+main () {
+  get_variables
+
+  if ! check_variables; then
+    return 1
+  fi
+
+  # Switch to dhcpcd here if Imager < v1.7.3 was used to generate firstrun.sh
+  fix_wpa > /dev/null 2>&1
+
+  check_kernel
+
+  if [ "$NOOBS" = "1" ] && [ "$NEW_KERNEL" != "1" ]; then
+    BCM_MODULE=$(grep -e "^Hardware" /proc/cpuinfo | cut -d ":" -f 2 | tr -d " " | tr '[:upper:]' '[:lower:]')
+    if ! modprobe "$BCM_MODULE"; then
+      FAIL_REASON="Couldn't load BCM module $BCM_MODULE"
+      return 1
+    fi
+  fi
+
+  if [ "$ROOT_PART_END" -eq "$TARGET_END" ]; then
+    reboot_pi
+  fi
+
+  if [ "$NOOBS" = "1" ]; then
+    if ! printf "resizepart %s\nyes\n%ss\n" "$EXT_PART_NUM" "$TARGET_END" | parted "$ROOT_DEV" ---pretend-input-tty; then
+      FAIL_REASON="Extended partition resize failed"
+      return 1
+    fi
+  fi
+
+  if ! parted -m "$ROOT_DEV" u s resizepart "$ROOT_PART_NUM" "$TARGET_END"; then
+    FAIL_REASON="Root partition resize failed"
+    return 1
+  fi
+
+  fix_partuuid
+
+  return 0
+}
+
+mount -t proc proc /proc
+mount -t sysfs sys /sys
+mount -t tmpfs tmp /run
+mkdir -p /run/systemd
+
+mount /boot
+mount / -o remount,ro
+
+sed -i 's| init=/usr/lib/raspi-config/init_resize\.sh||' /boot/cmdline.txt
+sed -i 's| sdhci\.debug_quirks2=4||' /boot/cmdline.txt
+
+if ! grep -q splash /boot/cmdline.txt; then
+  sed -i "s/ quiet//g" /boot/cmdline.txt
+fi
+mount /boot -o remount,ro
+sync
+
+if ! check_commands; then
+  reboot_pi
+fi
+
+if main; then
+  whiptail --infobox "Resized root filesystem. Rebooting in 5 seconds..." 20 60
+  sleep 5
+else
+  whiptail --msgbox "Could not expand filesystem, please try raspi-config or rc_gui.\n${FAIL_REASON}" 20 60
+  sleep 5
+fi
+
+reboot_pi

external/cache/sources/raspi-config/usr/share/raspi-config/10-blanking.conf

@@ -0,0 +1,11 @@
+Section "Extensions"
+    Option      "DPMS" "Disable"
+EndSection
+
+Section "ServerLayout"
+    Identifier "ServerLayout0"
+    Option "StandbyTime" "0"
+    Option "SuspendTime" "0"
+    Option "OffTime"     "0"
+    Option "BlankTime"   "0"
+EndSection

external/packages/raspi/stage1/03-install-packages/00-packages

@@ -1,2 +1,3 @@
 libraspberrypi-bin libraspberrypi0
 systemd-timesyncd
+dialog

scripts/distributions.sh

@@ -957,7 +957,12 @@ install_opi_specific()
 		cp "${DEB_STORAGE}/${CHOSEN_KERNEL/image/headers}_${REVISION}_${ARCH}.deb" "${SDCARD}"/opt/
 	fi
 
-	rk356x_gpu_vpu_tweaks_for_raspios
+	dpkg_install_deb_chroot "$EXTER/packages/raspi/orangepi/debs/raspi-config_20230214_all.deb"
+
+	case ${BOARDFAMILY} in
+		"rockchip-rk356x")
+			rk356x_gpu_vpu_tweaks_for_raspios
+	esac
 
 	[[ ! -d "${SDCARD}/lib/firmware" ]] && mkdir -p "${SDCARD}/lib/firmware"
 	cp -rfa ${EXTER}/cache/sources/orangepi-firmware-git/* ${SDCARD}/lib/firmware/