Cix: Support Orange Pi 6 Plus

2025-06-24 19:43:45 +08:00 · 2025-06-24 19:43:45 +08:00 · ff7af3be0c
parent ff9e781d2c
commit ff7af3be0c
47 changed files with 19652 additions and 264 deletions
--- a/.gitignore
+++ b/.gitignore
@ -12,6 +12,7 @@

 *.bak
 *.swp
+*.img
 *.tar.gz
 *.patch

@ -48,6 +49,7 @@ external/cache/sources/t527_packages
 external/cache/sources/rk-rootfs-build*
 external/cache/sources/orangepi-firmware*
 external/cache/sources/wiringOP
+external/cache/sources/component_cix*
 external/cache/sources/wiringOP-Python
 external/cache/sources/rk3399_gst_xserver_libs
 external/cache/sources/ascend-driver
--- a/external/config/boards/orangepi6plus.conf
+++ b/external/config/boards/orangepi6plus.conf
@ -0,0 +1,10 @@
+# Cix P1 SoC
+BOARD_NAME="Orange Pi 6 Plus"
+BOARDFAMILY="cix"
+KERNEL_TARGET="current"
+IMAGE_PARTITION_TABLE="gpt"
+DISTRIB_TYPE_CURRENT="bookworm"
+MODULES_CURRENT="armcb_isp_v4l2 btusb"
+PLYMOUTH="no"
+BUILD_MINIMAL="no"
+REVISION="1.0.0"
--- a/external/config/desktop/bookworm/environments/gnome/config_base/packages
+++ b/external/config/desktop/bookworm/environments/gnome/config_base/packages
@ -1,59 +1,111 @@
 anacron
 apt-xapian-index
 at-spi2-core
+bluetooth
+cifs-utils
+cheese
+clpeak
 colord
+command-not-found
 cups
 dbus-x11
-dmz-cursor-theme
 dconf-cli
+dhcpcd
+dhcpcd-base
+dmz-cursor-theme
 eject
-foomatic-db-compressed-ppds
+fcitx5
+fcitx5-config-qt
+fcitx5-chinese-addons
+fcitx5-rime
 fonts-noto-cjk
 fonts-ubuntu
 fonts-ubuntu-console
+fonts-wqy-zenhei
+foomatic-db-compressed-ppds
 gdebi
+gnome-bluetooth
 gnome-calculator
 gnome-control-center
-gnome-disk-utility
 gnome-desktop3-data
+gnome-disk-utility
 gnome-keyring
 gnome-menus
 gnome-screenshot
-gnome-disk-utility
-gnome-system-monitor
-gnome-terminal
 gnome-session
 gnome-shell
+gnome-system-monitor
+gnome-terminal
+gparted
+grub2-common
+grub-efi-arm64
+gstreamer1.0-alsa
+gstreamer1.0-libav
 gstreamer1.0-packagekit
 gstreamer1.0-plugins-base-apps
-gstreamer1.0-pulseaudio
 inputattach
+keyutils
+kmscube
+libegl1-mesa-dev
+libfdk-aac2
+libfdk-aac-dev
+libffi-dev
+libgles2-mesa-dev
+libnet1
+libnfsidmap1
 libnotify-bin
+libpcap0.8
+libpkgconf3
 libpulsedsp
+libpython3-dev
+libqt6opengl6
+libv4l2rds0
+libvulkan-dev
+libwayland-dev
 lm-sensors
+locales
+mesa-utils
 nautilus
+netwox
+nfs-common
 pavucontrol
+pipewalker
+pkgconf
+pkgconf-bin
+pkg-config
 profile-sync-daemon
-pulseaudio
-pulseaudio-module-bluetooth
+python3.11-venv
+python3-pip
+rpcbind
 software-properties-gtk
 synaptic
 system-config-printer
+task-gnome-desktop
 terminator
 tracker
 tracker-extract
 tracker-miner-fs
+tree
+udhcpc
+unrar
 upower
+v4l-utils
+vsftpd
+vulkan-tools
 x11-apps
 x11-session-utils
 x11-utils
 x11-xserver-utils
 xarchiver
+xbitmaps
 xdg-user-dirs
 xdg-user-dirs-gtk
+xfce4-screenshooter
 xfonts-base
+xfonts-intl-chinese
+xfonts-wqy
 xserver-xorg
+xserver-xorg-input-mouse
+xterm
 xwayland
 zenity
-lightdm
-lightdm-settings
--- a/external/config/desktop/bookworm/environments/gnome/config_base/packages.uninstall
+++ b/external/config/desktop/bookworm/environments/gnome/config_base/packages.uninstall
@ -1 +0,0 @@
-gdm3
--- a/external/config/desktop/bookworm/environments/gnome/debian/postinst
+++ b/external/config/desktop/bookworm/environments/gnome/debian/postinst
@ -1,13 +1,13 @@
-# overwrite stock lightdm greeter configuration
-if [ -d /etc/orangepi/lightdm ]; then cp -R /etc/orangepi/lightdm /etc/; fi
-if [ -f /etc/lightdm/slick-greeter.conf ]; then sed -i 's/orangepi-lightdm\/orangepi-default.png/warty-final-ubuntu.png/g' /etc/lightdm/slick-greeter.conf; fi
+## overwrite stock lightdm greeter configuration
+#if [ -d /etc/orangepi/lightdm ]; then cp -R /etc/orangepi/lightdm /etc/; fi
+#if [ -f /etc/lightdm/slick-greeter.conf ]; then sed -i 's/orangepi-lightdm\/orangepi-default.png/warty-final-ubuntu.png/g' /etc/lightdm/slick-greeter.conf; fi
+#
+#if [ -f /etc/lightdm/lightdm.conf.d/11-orangepi.conf ]; then sed -i "s/user-session.*/user-session=gnome-wayland/" /etc/lightdm/lightdm.conf.d/11-orangepi.conf; fi
+#
+## Disable Pulseaudio timer scheduling which does not work with sndhdmi driver
+#if [ -f /etc/pulse/default.pa ]; then sed "s/load-module module-udev-detect$/& tsched=0/g" -i  /etc/pulse/default.pa; fi

-if [ -f /etc/lightdm/lightdm.conf.d/11-orangepi.conf ]; then sed -i "s/user-session.*/user-session=gnome-wayland/" /etc/lightdm/lightdm.conf.d/11-orangepi.conf; fi
-
-# Disable Pulseaudio timer scheduling which does not work with sndhdmi driver
-if [ -f /etc/pulse/default.pa ]; then sed "s/load-module module-udev-detect$/& tsched=0/g" -i  /etc/pulse/default.pa; fi
-
-# set wallpapper to armbian
+# set wallpapper to orangepi
 keys=/etc/dconf/db/local.d/00-bg
 profile=/etc/dconf/profile/user

@ -17,16 +17,26 @@ install -Dv /dev/null $profile
 # set default shortcuts
 echo "
 [org/gnome/shell]
-favorite-apps = ['terminator.desktop', 'org.gnome.Nautilus.desktop', 'google-chrome.desktop', 'thunderbird.desktop', 'code.desktop', 'Zoom.desktop']
+favorite-apps = ['org.gnome.Nautilus.desktop', 'org.gnome.Terminal.desktop', 'chromium.desktop', 'org.gnome.Totem.desktop', 'gparted.desktop', 'org.gnome.Settings.desktop']
+
+[org/gnome/settings-daemon/plugins/power]
+sleep-inactive-ac-timeout='0'
+sleep-inactive-ac-type='nothing'
+sleep-inactive-battery-timeout='0'
+sleep-inactive-battery-type='nothing'
+power-button-action='interactive'
+
+[org/gnome/desktop/session]
+idle-delay=uint32 0

 [org/gnome/desktop/background]
-picture-uri='file:///usr/share/backgrounds/warty-final-ubuntu.png'
+picture-uri='file:///usr/share/backgrounds/orangepi/orangepi-default.png'
 picture-options='zoom'
 primary-color='#456789'
 secondary-color='#FFFFFF'

 [org/gnome/desktop/screensaver]
-picture-uri='file:///usr/share/backgrounds/warty-final-ubuntu.png'
+picture-uri='file:///usr/share/backgrounds/orangepi/orangepi-default.png'
 picture-options='zoom'
 primary-color='#456789'
 secondary-color='#FFFFFF'" >> $keys
--- a/external/config/desktop/bookworm/environments/gnome/orangepi/create_desktop_package.sh
+++ b/external/config/desktop/bookworm/environments/gnome/orangepi/create_desktop_package.sh
@ -1,164 +1,164 @@
 # install lightdm greeter
-cp -R "${EXTER}"/packages/blobs/desktop/lightdm "${destination}"/etc/orangepi
+#cp -R "${EXTER}"/packages/blobs/desktop/lightdm "${destination}"/etc/orangepi

 # install default desktop settings
-mkdir -p "${destination}"/etc/skel
-cp -R "${EXTER}"/packages/blobs/desktop/skel/. "${destination}"/etc/skel
+#mkdir -p "${destination}"/etc/skel
+#cp -R "${EXTER}"/packages/blobs/desktop/skel/. "${destination}"/etc/skel

 #install cinnamon desktop bar icons
-mkdir -p "${destination}"/usr/share/icons/orangepi
-cp "${EXTER}"/packages/blobs/desktop/desktop-icons/*.png "${destination}"/usr/share/icons/orangepi
+#mkdir -p "${destination}"/usr/share/icons/orangepi
+#cp "${EXTER}"/packages/blobs/desktop/desktop-icons/*.png "${destination}"/usr/share/icons/orangepi

 # install wallpapers
-mkdir -p "${destination}"/usr/share/backgrounds/orangepi/
-cp "${EXTER}"/packages/blobs/desktop/desktop-wallpapers/*.png "${destination}"/usr/share/backgrounds/orangepi
+#mkdir -p "${destination}"/usr/share/backgrounds/orangepi/
+#cp "${EXTER}"/packages/blobs/desktop/desktop-wallpapers/*.png "${destination}"/usr/share/backgrounds/orangepi

 # install wallpapers
-mkdir -p "${destination}"/usr/share/backgrounds/orangepi-lightdm/
-cp "${EXTER}"/packages/blobs/desktop/lightdm-wallpapers/*.png "${destination}"/usr/share/backgrounds/orangepi-lightdm
+#mkdir -p "${destination}"/usr/share/backgrounds/orangepi-lightdm/
+#cp "${EXTER}"/packages/blobs/desktop/lightdm-wallpapers/*.png "${destination}"/usr/share/backgrounds/orangepi-lightdm

 # install logo for login screen
 mkdir -p "${destination}"/usr/share/pixmaps/orangepi
 cp "${EXTER}"/packages/blobs/desktop/icons/orangepi.png "${destination}"/usr/share/pixmaps/orangepi

 #generate wallpaper list for background changer
-mkdir -p "${destination}"/usr/share/gnome-background-properties
-cat <<EOF > "${destination}"/usr/share/gnome-background-properties/orangepi.xml
-<?xml version="1.0"?>
-<!DOCTYPE wallpapers SYSTEM "gnome-wp-list.dtd">
-<wallpapers>
-  <wallpaper deleted="false">
-    <name>OrangePi black-pyscho</name>
-    <filename>/usr/share/backgrounds/orangepi/orangepi-default.png</filename>
-    <options>zoom</options>
-    <pcolor>#ffffff</pcolor>
-    <scolor>#000000</scolor>
-  </wallpaper>
-  <wallpaper deleted="false">
-    <name>OrangePi bluie-circle</name>
-    <filename>/usr/share/backgrounds/orangepi/orangepi-default.png</filename>
-    <options>zoom</options>
-    <pcolor>#ffffff</pcolor>
-    <scolor>#000000</scolor>
-  </wallpaper>
-  <wallpaper deleted="false">
-    <name>OrangePi blue-monday</name>
-    <filename>/usr/share/backgrounds/orangepi/orangepi-default.png</filename>
-    <options>zoom</options>
-    <pcolor>#ffffff</pcolor>
-    <scolor>#000000</scolor>
-  </wallpaper>
-  <wallpaper deleted="false">
-    <name>OrangePi blue-penguin</name>
-    <filename>/usr/share/backgrounds/orangepi/orangepi-default.png</filename>
-    <options>zoom</options>
-    <pcolor>#ffffff</pcolor>
-    <scolor>#000000</scolor>
-  </wallpaper>
-  <wallpaper deleted="false">
-    <name>OrangePi gray-resultado</name>
-    <filename>/usr/share/backgrounds/orangepi/orangepi-default.png</filename>
-    <options>zoom</options>
-    <pcolor>#ffffff</pcolor>
-    <scolor>#000000</scolor>
-  </wallpaper>
-  <wallpaper deleted="false">
-    <name>OrangePi green-penguin</name>
-    <filename>/usr/share/backgrounds/orangepi/orangepi-default.png</filename>
-    <options>zoom</options>
-    <pcolor>#ffffff</pcolor>
-    <scolor>#000000</scolor>
-  </wallpaper>
-  <wallpaper deleted="false">
-    <name>OrangePi green-retro</name>
-    <filename>/usr/share/backgrounds/orangepi/orangepi-default.png</filename>
-    <options>zoom</options>
-    <pcolor>#ffffff</pcolor>
-    <scolor>#000000</scolor>
-  </wallpaper>
-  <wallpaper deleted="false">
-    <name>OrangePi green-wall-penguin</name>
-    <filename>/usr/share/backgrounds/orangepi/orangepi-default.png</filename>
-    <options>zoom</options>
-    <pcolor>#ffffff</pcolor>
-    <scolor>#000000</scolor>
-  </wallpaper>
-  <wallpaper deleted="false">
-    <name>OrangePi 4k-neglated</name>
-    <filename>/usr/share/backgrounds/orangepi/orangepi-default.png</filename>
-    <options>zoom</options>
-    <pcolor>#ffffff</pcolor>
-    <scolor>#000000</scolor>
-  </wallpaper>
-  <wallpaper deleted="false">
-    <name>OrangePi neon-gray-penguin</name>
-    <filename>/usr/share/backgrounds/orangepi/orangepi-default.png</filename>
-    <options>zoom</options>
-    <pcolor>#ffffff</pcolor>
-    <scolor>#000000</scolor>
-  </wallpaper>
-  <wallpaper deleted="false">
-    <name>OrangePi plastic-love</name>
-    <filename>/usr/share/backgrounds/orangepi/orangepi-default.png</filename>
-    <options>zoom</options>
-    <pcolor>#ffffff</pcolor>
-    <scolor>#000000</scolor>
-  </wallpaper>
-  <wallpaper deleted="false">
-    <name>OrangePi purple-penguine</name>
-    <filename>/usr/share/backgrounds/orangepi/orangepi-default.png</filename>
-    <options>zoom</options>
-    <pcolor>#ffffff</pcolor>
-    <scolor>#000000</scolor>
-  </wallpaper>
-    <wallpaper deleted="false">
-    <name>OrangePi purplepunk-resultado</name>
-    <filename>/usr/share/backgrounds/orangepi/orangepi-default.png</filename>
-    <options>zoom</options>
-    <pcolor>#ffffff</pcolor>
-    <scolor>#000000</scolor>
-  </wallpaper>
-  <wallpaper deleted="false">
-    <name>OrangePi red-penguin-dark</name>
-    <filename>/usr/share/backgrounds/orangepi/orangepi-default.png</filename>
-    <options>zoom</options>
-    <pcolor>#ffffff</pcolor>
-    <scolor>#000000</scolor>
-  </wallpaper>
-  <wallpaper deleted="false">
-    <name>OrangePi red-penguin</name>
-    <filename>/usr/share/backgrounds/orangepi/orangepi-default.png</filename>
-    <options>zoom</options>
-    <pcolor>#ffffff</pcolor>
-    <scolor>#000000</scolor>
-  </wallpaper>
-  <wallpaper deleted="false">
-    <name>OrangePi light</name>
-    <filename>/usr/share/backgrounds/orangepi/orangepi-default.png</filename>
-    <options>zoom</options>
-    <pcolor>#ffffff</pcolor>
-    <scolor>#000000</scolor>
-  </wallpaper>
-  <wallpaper deleted="false">
-    <name>OrangePi dark</name>
-    <filename>/usr/share/backgrounds/orangepi/orangepi-default.png</filename>
-    <options>zoom</options>
-    <pcolor>#ffffff</pcolor>
-    <scolor>#000000</scolor>
-  </wallpaper>
-  <wallpaper deleted="false">
-    <name>OrangePi uc</name>
-    <filename>/usr/share/backgrounds/orangepi/orangepi-default.png</filename>
-    <options>zoom</options>
-    <pcolor>#ffffff</pcolor>
-    <scolor>#000000</scolor>
-  </wallpaper>
-  <wallpaper deleted="false">
-    <name>OrangePi clear</name>
-    <filename>/usr/share/backgrounds/orangepi/orangepi-default.png</filename>
-    <options>zoom</options>
-    <pcolor>#ffffff</pcolor>
-    <scolor>#000000</scolor>
-  </wallpaper>
-</wallpapers>
-EOF
+#mkdir -p "${destination}"/usr/share/gnome-background-properties
+#cat <<EOF > "${destination}"/usr/share/gnome-background-properties/orangepi.xml
+#<?xml version="1.0"?>
+#<!DOCTYPE wallpapers SYSTEM "gnome-wp-list.dtd">
+#<wallpapers>
+#  <wallpaper deleted="false">
+#    <name>OrangePi black-pyscho</name>
+#    <filename>/usr/share/backgrounds/orangepi/orangepi-default.png</filename>
+#    <options>zoom</options>
+#    <pcolor>#ffffff</pcolor>
+#    <scolor>#000000</scolor>
+#  </wallpaper>
+#  <wallpaper deleted="false">
+#    <name>OrangePi bluie-circle</name>
+#    <filename>/usr/share/backgrounds/orangepi/orangepi-default.png</filename>
+#    <options>zoom</options>
+#    <pcolor>#ffffff</pcolor>
+#    <scolor>#000000</scolor>
+#  </wallpaper>
+#  <wallpaper deleted="false">
+#    <name>OrangePi blue-monday</name>
+#    <filename>/usr/share/backgrounds/orangepi/orangepi-default.png</filename>
+#    <options>zoom</options>
+#    <pcolor>#ffffff</pcolor>
+#    <scolor>#000000</scolor>
+#  </wallpaper>
+#  <wallpaper deleted="false">
+#    <name>OrangePi blue-penguin</name>
+#    <filename>/usr/share/backgrounds/orangepi/orangepi-default.png</filename>
+#    <options>zoom</options>
+#    <pcolor>#ffffff</pcolor>
+#    <scolor>#000000</scolor>
+#  </wallpaper>
+#  <wallpaper deleted="false">
+#    <name>OrangePi gray-resultado</name>
+#    <filename>/usr/share/backgrounds/orangepi/orangepi-default.png</filename>
+#    <options>zoom</options>
+#    <pcolor>#ffffff</pcolor>
+#    <scolor>#000000</scolor>
+#  </wallpaper>
+#  <wallpaper deleted="false">
+#    <name>OrangePi green-penguin</name>
+#    <filename>/usr/share/backgrounds/orangepi/orangepi-default.png</filename>
+#    <options>zoom</options>
+#    <pcolor>#ffffff</pcolor>
+#    <scolor>#000000</scolor>
+#  </wallpaper>
+#  <wallpaper deleted="false">
+#    <name>OrangePi green-retro</name>
+#    <filename>/usr/share/backgrounds/orangepi/orangepi-default.png</filename>
+#    <options>zoom</options>
+#    <pcolor>#ffffff</pcolor>
+#    <scolor>#000000</scolor>
+#  </wallpaper>
+#  <wallpaper deleted="false">
+#    <name>OrangePi green-wall-penguin</name>
+#    <filename>/usr/share/backgrounds/orangepi/orangepi-default.png</filename>
+#    <options>zoom</options>
+#    <pcolor>#ffffff</pcolor>
+#    <scolor>#000000</scolor>
+#  </wallpaper>
+#  <wallpaper deleted="false">
+#    <name>OrangePi 4k-neglated</name>
+#    <filename>/usr/share/backgrounds/orangepi/orangepi-default.png</filename>
+#    <options>zoom</options>
+#    <pcolor>#ffffff</pcolor>
+#    <scolor>#000000</scolor>
+#  </wallpaper>
+#  <wallpaper deleted="false">
+#    <name>OrangePi neon-gray-penguin</name>
+#    <filename>/usr/share/backgrounds/orangepi/orangepi-default.png</filename>
+#    <options>zoom</options>
+#    <pcolor>#ffffff</pcolor>
+#    <scolor>#000000</scolor>
+#  </wallpaper>
+#  <wallpaper deleted="false">
+#    <name>OrangePi plastic-love</name>
+#    <filename>/usr/share/backgrounds/orangepi/orangepi-default.png</filename>
+#    <options>zoom</options>
+#    <pcolor>#ffffff</pcolor>
+#    <scolor>#000000</scolor>
+#  </wallpaper>
+#  <wallpaper deleted="false">
+#    <name>OrangePi purple-penguine</name>
+#    <filename>/usr/share/backgrounds/orangepi/orangepi-default.png</filename>
+#    <options>zoom</options>
+#    <pcolor>#ffffff</pcolor>
+#    <scolor>#000000</scolor>
+#  </wallpaper>
+#    <wallpaper deleted="false">
+#    <name>OrangePi purplepunk-resultado</name>
+#    <filename>/usr/share/backgrounds/orangepi/orangepi-default.png</filename>
+#    <options>zoom</options>
+#    <pcolor>#ffffff</pcolor>
+#    <scolor>#000000</scolor>
+#  </wallpaper>
+#  <wallpaper deleted="false">
+#    <name>OrangePi red-penguin-dark</name>
+#    <filename>/usr/share/backgrounds/orangepi/orangepi-default.png</filename>
+#    <options>zoom</options>
+#    <pcolor>#ffffff</pcolor>
+#    <scolor>#000000</scolor>
+#  </wallpaper>
+#  <wallpaper deleted="false">
+#    <name>OrangePi red-penguin</name>
+#    <filename>/usr/share/backgrounds/orangepi/orangepi-default.png</filename>
+#    <options>zoom</options>
+#    <pcolor>#ffffff</pcolor>
+#    <scolor>#000000</scolor>
+#  </wallpaper>
+#  <wallpaper deleted="false">
+#    <name>OrangePi light</name>
+#    <filename>/usr/share/backgrounds/orangepi/orangepi-default.png</filename>
+#    <options>zoom</options>
+#    <pcolor>#ffffff</pcolor>
+#    <scolor>#000000</scolor>
+#  </wallpaper>
+#  <wallpaper deleted="false">
+#    <name>OrangePi dark</name>
+#    <filename>/usr/share/backgrounds/orangepi/orangepi-default.png</filename>
+#    <options>zoom</options>
+#    <pcolor>#ffffff</pcolor>
+#    <scolor>#000000</scolor>
+#  </wallpaper>
+#  <wallpaper deleted="false">
+#    <name>OrangePi uc</name>
+#    <filename>/usr/share/backgrounds/orangepi/orangepi-default.png</filename>
+#    <options>zoom</options>
+#    <pcolor>#ffffff</pcolor>
+#    <scolor>#000000</scolor>
+#  </wallpaper>
+#  <wallpaper deleted="false">
+#    <name>OrangePi clear</name>
+#    <filename>/usr/share/backgrounds/orangepi/orangepi-default.png</filename>
+#    <options>zoom</options>
+#    <pcolor>#ffffff</pcolor>
+#    <scolor>#000000</scolor>
+#  </wallpaper>
+#</wallpapers>
+#EOF
--- a/external/config/desktop/noble/environments/gnome/config_base/packages
+++ b/external/config/desktop/noble/environments/gnome/config_base/packages
@ -56,3 +56,4 @@ xfonts-base
 xserver-xorg
 xwayland
 zenity
+tree
--- a/external/config/kernel/linux-cix-p1-current.config
+++ b/external/config/kernel/linux-cix-p1-current.config
--- a/external/config/kernel/linux-cix-p1-next.config
+++ b/external/config/kernel/linux-cix-p1-next.config
--- a/external/config/sources/arm64.conf
+++ b/external/config/sources/arm64.conf
@ -14,6 +14,7 @@ ARCH=arm64
 KERNEL_IMAGE_TYPE=Image
 CAN_BUILD_STRETCH=yes
 GIT_SERVER="https://github.com/orangepi-xunlong"
+[[ -z $GITEE_SERVER ]] && GITEE_SERVER=no

 [[ -z $INITRD_ARCH ]] && INITRD_ARCH=arm64

--- a/external/config/sources/families/cix.conf
+++ b/external/config/sources/families/cix.conf
@ -0,0 +1,485 @@
+ARCH="arm64"
+
+LINUXFAMILY="cix"
+BOOTCONFIG="none"
+ATF_COMPILE="no"
+EXTERNAL_NEW="none"
+
+SERIALCON="ttyAMA2"
+KERNEL_COMPILER='aarch64-none-linux-gnu-'
+
+case $BRANCH in
+
+	current)
+		if [[ $GITEE_SERVER == yes ]]; then
+			KERNELSOURCE="https://gitee.com/orangepi-xunlong/orange-pi-6.1-cix.git"
+		fi
+		KERNELBRANCH='branch:orange-pi-6.1-cix'
+		KERNELPATCHDIR='cix-current'
+		LINUXCONFIG="linux-cix-p1-current"
+		KERNEL_USE_GCC='> 12.0'
+	;;
+
+	next)
+		KERNELBRANCH='branch:orange-pi-6.6-cix'
+		KERNELPATCHDIR='cix-next'
+		LINUXCONFIG="linux-cix-p1-next"
+		KERNEL_USE_GCC='> 12.0'
+	;;
+esac
+
+family_tweaks_bsp() {
+	:
+}
+
+function build_cix_prideb() {
+	local PATH_OUT_PRIVATE_DEB_PACKAGES=${EXTER}/cache/sources/component_cix-${BRANCH}/cix_proprietary/cix_proprietary-debs
+	local amvx_module=${EXTER}/cache/sources/component_cix-${BRANCH}/cix_opensource/vpu/vpu_driver/bin/aarch64-none-linux-gnu/amvx.ko
+	local linux_version=$(modinfo ${amvx_module} | awk -F': ' '/vermagic/{split($2,a," "); print a[1]}')
+
+	#npu-noe-umd
+	pkg_Name="cix-noe-umd"
+	create_cix_deb "$pkg_Name"
+
+	#isp-umd
+	pkg_Name="cix-isp-umd"
+	create_cix_deb "$pkg_Name"
+
+	#gpu
+	pkg_Name="cix-gpu-umd"
+	if [[ ! -e $PATH_OUT_PRIVATE_DEB_PACKAGES/cix-gpu-umd/etc/systemd/system ]]; then
+		mkdir -p $PATH_OUT_PRIVATE_DEB_PACKAGES/cix-gpu-umd/etc/systemd/system
+	fi
+	if [[ ! -e $PATH_OUT_PRIVATE_DEB_PACKAGES/cix-gpu-umd/usr/bin ]]; then
+		mkdir -p $PATH_OUT_PRIVATE_DEB_PACKAGES/cix-gpu-umd/usr/bin
+	fi
+	cat > $PATH_OUT_PRIVATE_DEB_PACKAGES/cix-gpu-umd/etc/systemd/system/load-modules.service <<- EOF
+[Unit]
+Description=Load custom kernel modules
+
+[Service]
+Type=oneshot
+ExecStart=/usr/bin/load-modules.sh
+RemainAfterExit=yes
+
+[Install]
+WantedBy=sysinit.target
+EOF
+	cat > $PATH_OUT_PRIVATE_DEB_PACKAGES/cix-gpu-umd/usr/bin/load-modules.sh <<- EOF
+#!/bin/bash
+
+insmod /lib/modules/$linux_version/extra/protected_memory_allocator.ko
+insmod /lib/modules/$linux_version/extra/memory_group_manager.ko
+insmod /lib/modules/$linux_version/extra/mali_kbase.ko
+#insmod /lib/modules/$linux_version/extra/rtl_btusb.ko
+#insmod /lib/modules/$linux_version/extra/rtl_wlan.ko
+insmod /lib/modules/$linux_version/extra/aipu.ko
+insmod /lib/modules/$linux_version/extra/amvx.ko
+insmod /lib/modules/$linux_version/kernel/drivers/hid/uhid.ko
+
+#insmod /lib/modules/$linux_version/kernel/net/netfilter/x_tables.ko
+#insmod /lib/modules/$linux_version/kernel/net/ipv4/netfilter/ip_tables.ko
+#insmod /lib/modules/$linux_version/kernel/net/ipv4/netfilter/iptable_nat.ko
+#insmod /lib/modules/$linux_version/kernel/net/ipv4/netfilter/nf_defrag_ipv4.ko
+#insmod /lib/modules/$linux_version/kernel/net/ipv6/netfilter/nf_defrag_ipv6.ko
+#insmod /lib/modules/$linux_version/kernel/lib/libcrc32c.ko
+#insmod /lib/modules/$linux_version/kernel/net/netfilter/nf_conntrack.ko
+#insmod /lib/modules/$linux_version/kernel/net/netfilter/nf_nat.ko
+#insmod /lib/modules/$linux_version/kernel/net/netfilter/xt_MASQUERADE.ko
+
+ln -s /dev/dma_heap/reserved /dev/dma_heap/linux,cma
+
+if [[ ! -e  /etc/machine-id ]]; then
+	dbus-uuidgen > /etc/machine-id
+	ln -sf /etc/machine-id /var/lib/dbus/machine-id
+fi
+
+EOF
+	cat >> $PATH_OUT_PRIVATE_DEB_PACKAGES/cix-gpu-umd/usr/bin/load-modules.sh <<- 'EOF'
+video_devices=($(ls /dev/video* 2>/dev/null | sort -V))
+
+if [ ${#video_devices[@]} -eq 1 ]; then
+	ln -s "${video_devices[0]}" /dev/video-cixdec0
+elif [ ${#video_devices[@]} -eq 0 ]; then
+	echo "Not found /dev/video*"
+else
+	max_device="${video_devices[-2]}"
+	ln -s "$max_device" /dev/video-cixdec0
+fi
+EOF
+	sudo chmod a+x $PATH_OUT_PRIVATE_DEB_PACKAGES/cix-gpu-umd/usr/bin/load-modules.sh
+	if [[ ! -e $PATH_OUT_PRIVATE_DEB_PACKAGES/cix-gpu-umd/DEBIAN ]]; then
+		mkdir -p $PATH_OUT_PRIVATE_DEB_PACKAGES/cix-gpu-umd/DEBIAN
+	fi
+	cat > $PATH_OUT_PRIVATE_DEB_PACKAGES/cix-gpu-umd/DEBIAN/postinst <<- EOF
+#!/bin/sh
+set -e
+
+# Enable the service to start on boot
+systemctl enable load-modules.service || true
+
+exit 0
+EOF
+	cat > $PATH_OUT_PRIVATE_DEB_PACKAGES/cix-gpu-umd/DEBIAN/triggers <<- EOF
+activate-noawait ldconfig
+EOF
+	cat > $PATH_OUT_PRIVATE_DEB_PACKAGES/cix-gpu-umd/DEBIAN/shlibs <<- EOF
+libgbm 1 cix-gpu-umd (>= 1.0.0-1)
+EOF
+	sudo chmod a+x $PATH_OUT_PRIVATE_DEB_PACKAGES/cix-gpu-umd/DEBIAN/postinst
+	rm -rf $PATH_OUT_PRIVATE_DEB_PACKAGES/cix-gpu-umd/usr/share/cix
+	create_cix_deb "$pkg_Name"
+
+	#dsp
+	pkg_Name="cix-audio-dsp"
+	create_cix_deb "$pkg_Name"
+}
+
+function create_cix_deb() {
+	local pkg_Name="$1"
+	local PATH_CHANGELOGS=${EXTER}/cache/sources/component_cix-${BRANCH}/changelogs
+	local PRIVATE_DEB_PACKAGES=("cix-dpu-ddk" "cix-npu-umd" "cix-isp-umd" "cix-gpu-umd" "cix-audio-dsp" "cix-hdcp2" "cix-noe-umd")
+	local CIX_DEB_VERSION="0.01-1"
+
+	display_alert "Building cix deb" "${pkg_Name}" "info"
+	CHANGELOG="$PATH_CHANGELOGS/changelog.${pkg_Name}"
+	if [[ ! -f "$CHANGELOG" ]]; then
+		exit_with_error "changelog not found" "${CHANGELOG}"
+	fi
+
+	VERSION=$(grep -m 1 -oP '^\S+\s+\(\K[^)]+(?=\))' "$CHANGELOG")
+	if [[ ! -n "$VERSION" ]]; then
+		display_alert "get Version failed from: ${CHANGELOG}, will use default version" "1.0.0" "info"
+		sleep 10
+		VERSION="1.0.0"
+	fi
+
+	local pkg_Ver=$VERSION
+	local pkg_private=false
+
+	for str in "${PRIVATE_DEB_PACKAGES[@]}"; do
+		if [[ "$str" == "$pkg_Name" ]]; then
+			rm -rf ${PATH_OUT_DEB_PACKAGES}/$pkg_Name
+			cp -r ${PATH_OUT_PRIVATE_DEB_PACKAGES}/${pkg_Name} ${PATH_OUT_DEB_PACKAGES}/$pkg_Name
+			break
+		fi
+	done
+
+	local build_deb_dir="${PATH_OUT_DEB_PACKAGES}/${pkg_Name}"
+
+	case "$pkg_Name" in
+	("cix-mesa")
+	CONTROL_CONTENT="Package: ${pkg_Name}
+Version: ${pkg_Ver}
+Architecture: arm64
+Maintainer: Cix OS team
+Depends: libc6 (>= 2.34)
+Provides: libgl1-mesa-dri, libgl1, libglapi-mesa, libgl-dev
+Replaces: libgl1-mesa-dri, libgl1, libglapi-mesa, libgl-dev
+Section: utils
+Priority: optional
+Description: $pkg_Name package"
+	;;
+	("cix-xserver")
+	CONTROL_CONTENT="Package: ${pkg_Name}
+Version: ${pkg_Ver}
+Architecture: arm64
+Maintainer: Cix OS team
+Depends: libc6 (>= 2.34)
+Provides: xwayland
+Replaces: xwayland
+Section: utils
+Priority: optional
+Description: $pkg_Name package"
+	;;
+	("cix-gpu-umd")
+	CONTROL_CONTENT="Package: ${pkg_Name}
+Version: ${pkg_Ver}
+Architecture: arm64
+Maintainer: Cix OS team
+Depends: libc6 (>= 2.34)
+Provides: libwayland-dev, libwayland-egl1, libgles2, ocl-icd-libopencl1, libgbm1, libegl-dev, libgles1, libegl1, libgles1, libgles-dev, ocl-icd-opencl-dev, libgbm-dev
+Replaces: libwayland-dev, libwayland-egl1, libgles2, ocl-icd-libopencl1, libgbm1, libegl-dev, libgles1, libegl1, libgles1, libgles-dev, ocl-icd-opencl-dev, libgbm-dev
+Section: utils
+Priority: optional
+Description: $pkg_Name package"
+	;;
+	("cix-gstreamer")
+	CONTROL_CONTENT="Package: ${pkg_Name}
+Version: ${pkg_Ver}
+Architecture: arm64
+Maintainer: Cix OS team
+Depends: libc6 (>= 2.34), libglib2.0-0, libglib2.0-bin, libx11-6, libgdk-pixbuf-2.0-0, zlib1g, libasound2, libogg0, libopus0, libxext6, libxi6, libxfixes3, libxdamage1, libxml2, libnettle8, libcairo2, libjpeg62-turbo, libpng16-16, libsoup-3.0-0, libva-drm2, libva-glx2, libva-wayland2, libva-x11-2, libva2, libdrm2, libdrm-radeon1, libdrm-nouveau2, libdrm-amdgpu1, libdrm-freedreno1, libdrm-tegra0, libdrm-etnaviv1, libvulkan1, libxcb1, libxkbcommon0, libwayland-client0, libwayland-server0, libwayland-cursor0, libwayland-egl1, libwayland-bin, libnice10, libwebp7, libwebpmux3, libwebpdemux2, libjson-glib-1.0-0, libpango-1.0-0, libpangocairo-1.0-0, libpangoft2-1.0-0, libpangoxft-1.0-0
+Section: utils
+Priority: optional
+Description: $pkg_Name package"
+	;;
+	("cix-npu-onnxruntime")
+	CONTROL_CONTENT="Package: ${pkg_Name}
+Version: ${pkg_Ver}
+Architecture: arm64
+Maintainer: Cix OS team
+Depends: python3-pip
+Section: utils
+Priority: optional
+Description: $pkg_Name package"
+	;;
+	(*)
+	CONTROL_CONTENT="Package: ${pkg_Name}
+Version: ${pkg_Ver}
+Architecture: arm64
+Maintainer: Cix OS team
+Depends: libc6 (>= 2.34)
+Section: utils
+Priority: optional
+Description: $pkg_Name package"
+	;;
+	esac
+
+	if [[ -e $build_deb_dir/usr/share/doc/$pkg_Name ]]; then
+		if [[ -e $build_deb_dir/usr/share/doc/$pkg_Name/changelog.Debian.gz ]]; then
+			rm -rf  $build_deb_dir/usr/share/doc/$pkg_Name/changelog.Debian.gz
+		fi
+	else
+		mkdir -p $build_deb_dir/usr/share/doc/$pkg_Name
+	fi
+
+	cp $CHANGELOG $build_deb_dir/usr/share/doc/$pkg_Name/changelog.Debian
+	gzip $build_deb_dir/usr/share/doc/$pkg_Name/changelog.Debian
+
+	if [[ -e $PATH_OUT_PRIVATE_DEB_PACKAGES/copyright/$pkg_Name ]]; then
+		mkdir -p $build_deb_dir/usr/share/doc/$pkg_Name
+		cp $PATH_OUT_PRIVATE_DEB_PACKAGES/copyright/$pkg_Name/copyright $build_deb_dir/usr/share/doc/$pkg_Name
+	fi
+
+	if [[ -e "$build_deb_dir" ]]; then
+		if [[ ! -e "$build_deb_dir/DEBIAN/control" ]]; then
+			mkdir -p "$build_deb_dir/DEBIAN"
+			echo "${CONTROL_CONTENT}" > "$build_deb_dir/DEBIAN/control"
+		else
+			sed -i "s/^Version: .*/Version: $pkg_Ver/" "$build_deb_dir/DEBIAN/control"
+		fi
+
+		chmod -R 755 "$build_deb_dir"
+		chmod -R g-s "$build_deb_dir"
+		rm -f ${PATH_OUT_DEB_PACKAGES}/${pkg_Name}_*.deb
+		dpkg-deb -b --root-owner-group "$build_deb_dir" "${PATH_OUT_DEB_PACKAGES}/${pkg_Name}_${pkg_Ver}_arm64.deb" > /dev/null
+		rm -rf ${PATH_OUT_DEB_PACKAGES}/${pkg_Name}
+	else
+		display_alert "deb path does not exist" "${build_deb_dir}" "info"
+	fi
+}
+
+family_tweaks_kernel () {
+
+	cix_open_src=${EXTER}/cache/sources/component_cix-${BRANCH}/cix_opensource
+	PATH_OUT_PRIVATE_DEB_PACKAGES=${EXTER}/cache/sources/component_cix-${BRANCH}/cix_proprietary/cix_proprietary-debs
+	PATH_OUT_DEB_PACKAGES=${DEB_STORAGE}/cix_debs-${BRANCH}
+
+	export ARCH=arm64
+	export KDIR=${SRC}/kernel/${KERNELBRANCH#branch:}
+	export CROSS_COMPILE=${toolchain}/${KERNEL_COMPILER}
+
+	[[ -d ${PATH_OUT_DEB_PACKAGES} ]] && rm -r ${PATH_OUT_DEB_PACKAGES}
+	mkdir -p ${PATH_OUT_DEB_PACKAGES}
+
+	cd ${cix_open_src}/vpu/vpu_driver/
+	bash ./clean.sh > /dev/null
+	scons $CTHREADS target=linux > /dev/null
+	# build deb package
+	pkg_Name="cix-vpu-driver"
+	linux_version=$(strings ${LINUXSOURCEDIR}/arch/arm64/boot/Image | grep "Linux version" | cut -d' ' -f3 | head -1)
+	build_deb_dir=${PATH_OUT_DEB_PACKAGES}/${pkg_Name}
+	rm -rf ${build_deb_dir}
+	install_dir=${build_deb_dir}/usr/share/cix/bin
+	install_dir_kernel_modules=${build_deb_dir}/lib/modules/${linux_version}/extra
+	install_dir_include=${build_deb_dir}/usr/share/cix/include
+	install_dir_firmware="${build_deb_dir}/lib/firmware"
+	mkdir -p ${install_dir}
+	mkdir -p ${install_dir_kernel_modules}
+	mkdir -p ${install_dir_include}
+	mkdir -p ${install_dir_firmware}
+	if [ -f bin/aarch64-none-linux-gnu/amvx.ko ]; then
+		cp bin/aarch64-none-linux-gnu/amvx.ko ${install_dir_kernel_modules}
+		cp include/aarch64-none-linux-gnu/mvx-v4l2-controls.h ${install_dir_include}
+		if [[ -d "${PATH_OUT_PRIVATE_DEB_PACKAGES}/cix-vpu-umd/usr/lib/firmware" ]]; then
+			cp -fp ${PATH_OUT_PRIVATE_DEB_PACKAGES}/cix-vpu-umd/usr/lib/firmware/* ${install_dir_firmware}/
+		fi
+		create_cix_deb "${pkg_Name}"
+	else
+		exit_with_error "vpu: amvx.ko module not exist"
+	fi
+	# finish build deb package
+	cd - > /dev/null
+
+	export COMPASS_DRV_BTENVAR_ARCH=${ARCH}
+	export COMPASS_DRV_BTENVAR_KMD_DIR=driver
+	export COMPASS_DRV_BTENVAR_KMD_VERSION=5.8.0
+	export COMPASS_DRV_BTENVAR_KPATH=${KDIR}
+	export BUILD_AIPU_VERSION_KMD=BUILD_ZHOUYI_V3
+	export BUILD_TARGET_PLATFORM_KMD=BUILD_PLATFORM_SKY1
+	export BUILD_NPU_DEVFREQ=y
+	cd ${cix_open_src}/npu/npu_driver
+	cp -f ${COMPASS_DRV_BTENVAR_KMD_DIR}/armchina-npu/include/armchina_aipu.h ${KDIR}/include/uapi/misc
+	make $CTHREADS -C ${COMPASS_DRV_BTENVAR_KMD_DIR} ARCH=${COMPASS_DRV_BTENVAR_ARCH} CROSS_COMPILE=${CROSS_COMPILE} clean > /dev/null
+	make $CTHREADS -C ${COMPASS_DRV_BTENVAR_KMD_DIR} ARCH=${COMPASS_DRV_BTENVAR_ARCH} CROSS_COMPILE=${CROSS_COMPILE} > /dev/null
+	pkg_Name="cix-npu-driver"
+	if [ -f ${COMPASS_DRV_BTENVAR_KMD_DIR}/aipu.ko ]; then
+		# build deb package
+		build_deb_dir=${PATH_OUT_DEB_PACKAGES}/${pkg_Name}
+		rm -rf ${build_deb_dir}
+		install_dir=${build_deb_dir}/lib/modules/${linux_version}/extra
+		mkdir -p ${install_dir}
+		cp ${COMPASS_DRV_BTENVAR_KMD_DIR}/aipu.ko ${install_dir}
+		create_cix_deb "${pkg_Name}"
+		rm -f $PATH_LINUX/include/uapi/misc/armchina_aipu.h
+		# finish build deb package
+	else
+		exit_with_error "npu: aipu.ko module not exist"
+	fi
+	cd - > /dev/null
+
+	export CONFIG_MALI_BASE_MODULES=y
+	export CONFIG_MALI_MEMORY_GROUP_MANAGER=y
+	export CONFIG_MALI_PROTECTED_MEMORY_ALLOCATOR=y
+	export CONFIG_MALI_PLATFORM_NAME="sky1"
+	export CONFIG_MALI_CSF_SUPPORT=y
+	export CONFIG_MALI_CIX_POWER_MODEL=y
+        cd ${cix_open_src}/gpu
+	bash clean.sh > /dev/null
+	gpu_driver_dir=${cix_open_src}/gpu/gpu_kernel/drivers
+	if [[ "${DOCKER_MODE}" == "docker" ]]; then
+		ARCH=arm64 make KCFLAGS="-D__ANDROID_COMMON_KERNEL__ -DUSING_DOCKER_MODE" $CTHREADS -C ${gpu_driver_dir}/base/arm/ > /dev/null
+		ARCH=arm64 make KCFLAGS="-D__ANDROID_COMMON_KERNEL__ -DUSING_DOCKER_MODE" $CTHREADS -C ${gpu_driver_dir}/gpu/arm/ > /dev/null
+	else
+		ARCH=arm64 make $CTHREADS -C ${gpu_driver_dir}/base/arm/ > /dev/null
+		ARCH=arm64 make $CTHREADS -C ${gpu_driver_dir}/gpu/arm/ > /dev/null
+	fi
+	# build deb package
+	pkg_Name="cix-gpu-driver"
+	build_deb_dir=${PATH_OUT_DEB_PACKAGES}/${pkg_Name}
+	rm -rf ${build_deb_dir}
+	install_dir=${build_deb_dir}/lib/modules/${linux_version}/extra
+	mkdir -p ${install_dir}
+	if [ -f ${gpu_driver_dir}/gpu/arm/midgard/mali_kbase.ko ]; then
+		cp ${gpu_driver_dir}/base/arm/memory_group_manager/memory_group_manager.ko ${install_dir}
+		cp ${gpu_driver_dir}/base/arm/protected_memory_allocator/protected_memory_allocator.ko ${install_dir}
+		cp ${gpu_driver_dir}/gpu/arm/midgard/mali_kbase.ko ${install_dir}
+		create_cix_deb "${pkg_Name}"
+	else
+		exit_with_error "gpu: amxv.ko module not exist"
+	fi
+	# finish build deb package
+	cd - > /dev/null
+
+	local DRV_DIR=${cix_open_src}/isp/isp_driver
+	MODULE=armcb_isp_v4l2
+	cd "${DRV_DIR}"
+	make ARCH=${ARCH} CROSS_COMPILE=${CROSS_COMPILE} $CTHREADS PATH_ROOT=${KDIR} clean > /dev/null
+	make ARCH=${ARCH} CROSS_COMPILE=${CROSS_COMPILE} $CTHREADS PATH_ROOT=${KDIR} build > /dev/null
+	if [ -f ${DRV_DIR}/${MODULE}.ko ]; then
+		# build deb package
+		pkg_Name="cix-isp-driver-v4l2"
+		build_deb_dir=${PATH_OUT_DEB_PACKAGES}/${pkg_Name}
+		rm -rf ${build_deb_dir}
+		install_dir=${build_deb_dir}/lib/modules/${linux_version}/extra
+		mkdir -p ${install_dir}
+		cp ${DRV_DIR}/${MODULE}.ko ${install_dir}
+		create_cix_deb "${pkg_Name}"
+	else
+		exit_with_error "${MODULE}.ko module not exist"
+	fi
+	cd - > /dev/null
+
+	build_cix_prideb
+
+	mkdir -p ${SRC}/output/cix/ > /dev/null 2>&1
+	cp ${KDIR}/arch/arm64/boot/Image ${SRC}/output/cix/
+	cp ${KDIR}/arch/arm64/boot/dts/cix/sky1-*dtb ${SRC}/output/cix/
+	rm ${SRC}/output/debs/linux-dtb*
+}
+
+install_cix_debs() {
+
+	[[ $BUILD_DESKTOP != yes ]] && return
+	[[ ${RELEASE} == noble ]] && return
+
+	display_alert "Installing" "Cix debs" "info"
+
+	local POOL_PATH=${EXTER}/cache/sources/component_cix-${BRANCH}/cix_proprietary/cix_proprietary-debs
+	local DEB_PATH=${SDCARD}/root/debs
+
+	mkdir -p ${DEB_PATH}
+	cp -fp $POOL_PATH/pool/main/*/*/*.deb ${DEB_PATH}/
+	cp -fp $POOL_PATH/pool/main/*/*.deb   ${DEB_PATH}/
+	cp ${EXTER}/cache/sources/component_cix-${BRANCH}/debs/*.deb ${DEB_PATH}/
+
+	run_on_sdcard "apt-get -y --allow-downgrades install /root/debs/*.deb"
+	run_on_sdcard "systemctl mask swap.target"
+	run_on_sdcard "systemctl enable cix_resume.service"
+	run_on_sdcard "systemctl enable cix_resume_prepare.service"
+	rm ${DEB_PATH} -rf
+
+	dpkg_install_deb_chroot "${EXTER}/cache/sources/component_cix-${BRANCH}/debs_manual/cix-gnome-core-1.43_arm64.deb"
+	dpkg_install_deb_chroot "${EXTER}/cache/sources/component_cix-${BRANCH}/debs_manual/yolox-demo-v4l2_2.0.0_arm64.deb"
+	#dpkg_install_deb_chroot "${EXTER}/cache/sources/component_cix-${BRANCH}/debs_manual/systemd_252.26-1~deb12u2_arm64.deb"
+	run_on_sdcard "EBIAN_FRONTEND=noninteractive apt-get -yqq install pulseaudio"
+	run_on_sdcard "EBIAN_FRONTEND=noninteractive apt-get -yqq remove wireplumber"
+	run_on_sdcard "EBIAN_FRONTEND=noninteractive apt-get -yqq remove pipewire-pulse"
+
+	rm $SDCARD/root/*.deb >/dev/null 2>&1
+}
+
+family_tweaks() {
+
+	install_balenaEtcher
+	#install_wiringop
+
+	if [[ -L "${SDCARD}/usr/lib/policykit-1/polkit-agent-helper-1" ]]; then
+		chmod 5755 ${SDCARD}/usr/lib/policykit-1/polkit-agent-helper-1
+	fi
+
+	cp ${DEB_STORAGE}/cix_debs-${BRANCH} ${SDCARD}/root/ -rf
+	run_on_sdcard "apt-get -y --allow-downgrades install /root/cix_debs-${BRANCH}/*.deb"
+
+	amvx_module=${EXTER}/cache/sources/component_cix-${BRANCH}/cix_opensource/vpu/vpu_driver/bin/aarch64-none-linux-gnu/amvx.ko
+	linux_version=$(modinfo ${amvx_module} | awk -F': ' '/vermagic/{split($2,a," "); print a[1]}')
+
+	run_on_sdcard "depmod -a $linux_version/"
+	rm -rf ${SDCARD}/root/cix_debs-${BRANCH}
+	rm -rf ${SDCARD}/usr/local/test.mp4
+
+	touch ${SDCARD}/root/.Xauthority
+
+	mv ${SDCARD}/usr/share/cix/bin/spidev_test ${SDCARD}/usr/bin/ >/dev/null 2>&1
+	rm ${SDCARD}/usr/share/cix/bin/isp_app >/dev/null 2>&1
+
+	sed -i 's/^ENABLED=true$/ENABLED=false/' ${SDCARD}/etc/default/orangepi-zram-config
+
+	run_on_sdcard "systemctl --no-reload enable getty@tty1.service >/dev/null 2>&1"
+	run_on_sdcard "systemctl --no-reload enable isp-daemon.service >/dev/null 2>&1"
+	if [[ ${RELEASE} == bookworm ]]; then
+		run_on_sdcard "systemctl mask ssh.socket" >/dev/null 2>&1
+	fi
+
+	rsync -a --chown=root:root "${EXTER}"/packages/bsp/overlays_cix/* ${SDCARD}/
+}
+
+install_balenaEtcher(){
+
+	if [[ $BUILD_DESKTOP == yes && $install_balena_etcher == yes ]]; then
+
+		[[ ${RELEASE} == noble ]] && return
+
+		balena_etcher_deb=balena-etcher-electron_1.7.9+5945ab1f_arm64.deb
+		balena_etcher_url="https://github.com/Itai-Nelken/BalenaEtcher-arm/releases/download/v1.7.9/${balena_etcher_deb}"
+		balena_etcher=${EXTER}/cache/debs/arm64/${balena_etcher_deb}
+
+		if [[ ! -f ${balena_etcher} ]]; then
+			wget -P ${EXTER}/cache/debs/arm64 ${balena_etcher_url}
+		fi
+
+		install_deb_chroot ${balena_etcher}
+		rm $SDCARD/root/*.deb >/dev/null 2>&1
+	fi
+}
--- a/external/config/templates/config-example.conf
+++ b/external/config/templates/config-example.conf
@ -23,6 +23,7 @@ INSTALL_KSRC="no"
 IGNORE_UPDATES=""
 COMPRESS_OUTPUTIMAGE="no"
 NO_APT_CACHER="yes"
+GITEE_SERVER="no"

 #install_balena_etcher="yes"
 #install_zfs="yes"
--- a/external/config/torrents/arm-gnu-toolchain-12.3.rel1-x86_64-aarch64-none-linux-gnu.tar.xz.asc
+++ b/external/config/torrents/arm-gnu-toolchain-12.3.rel1-x86_64-aarch64-none-linux-gnu.tar.xz.asc
@ -0,0 +1 @@
+db962c19a1737d10bcf14e18a8bc66e4  arm-gnu-toolchain-12.3.rel1-x86_64-aarch64-none-linux-gnu.tar.xz
--- a/external/config/torrents/arm-gnu-toolchain-12.3.rel1-x86_64-aarch64-none-linux-gnu.tar.xz.md5
+++ b/external/config/torrents/arm-gnu-toolchain-12.3.rel1-x86_64-aarch64-none-linux-gnu.tar.xz.md5
@ -0,0 +1 @@
+db962c19a1737d10bcf14e18a8bc66e4
--- a/external/config/torrents/ky-toolchain-linux-glibc-x86_64-v1.0.1.tar.xz.md5sum
+++ b/external/config/torrents/ky-toolchain-linux-glibc-x86_64-v1.0.1.tar.xz.md5sum
--- a/external/packages/bsp/common/etc/update-motd.d/30-orangepi-sysinfo
+++ b/external/packages/bsp/common/etc/update-motd.d/30-orangepi-sysinfo
@ -138,7 +138,8 @@ function get_ip_addresses() {
 		if [[ $intf =~ $HIDE_IP_PATTERN ]]; then
 			continue
 		else
-			local tmp=$(ip -4 addr show dev $intf | grep -v "$intf:avahi" | awk '/inet/ {print $2}' | cut -d'/' -f1)
+			local tmp=$(ip -4 addr show dev $intf | grep -v "$intf:avahi" | awk '/inet/ {print $2}' | cut -d'/' -f1 | head -n 1)
+
 			# add both name and IP - can be informative but becomes ugly with long persistent/predictable device names
 			#[[ -n $tmp ]] && ips+=("$intf: $tmp")
 			# add IP only
--- a/external/packages/bsp/common/usr/lib/orangepi/orangepi-resize-filesystem
+++ b/external/packages/bsp/common/usr/lib/orangepi/orangepi-resize-filesystem
@ -24,7 +24,8 @@ do_expand_partition()

 	# trim any btrfs subvolume identifier given in square brackets (e.g. /dev/mapper/orangepi-root[/@])
 	local rootsource=$(findmnt -n -o SOURCE / | sed 's~\[.*\]~~') # i.e. /dev/mmcblk0p1 or /dev/mapper/orangepi-root
-	
+	old_partuuid=$(sudo blkid ${rootsource} -s PARTUUID -o value)
+
 	# check for device type
 	local roottype=$(lsblk -n -o TYPE $rootsource) # crypt, part or disk
 	case ${roottype} in
@ -160,6 +161,17 @@ do_expand_partition()
 			btrfs filesystem resize max / >> ${Log} 2>&1
 			;;
 	esac
+
+	if [[ ${BOARD} == orangepi6plus ]]; then
+		new_partuuid=$(sudo blkid ${rootsource} -s PARTUUID -o value)
+		if [[ ${rootdevice} == *sd* ]]; then
+			mount ${rootdevicepath}1 /mnt/
+		else
+			mount ${rootdevicepath}p1 /mnt/
+		fi
+		sed -i "s/root=PARTUUID=${old_partuuid}/root=PARTUUID=${new_partuuid}/g" /mnt/GRUB/GRUB.CFG
+		umount /mnt/
+	fi
 }

 do_resize_crypt()
--- a/external/packages/bsp/common/usr/local/bin/check-config.sh
+++ b/external/packages/bsp/common/usr/local/bin/check-config.sh
@ -0,0 +1,422 @@
+#!/usr/bin/env sh
+set -e
+
+EXITCODE=0
+
+# bits of this were adapted from lxc-checkconfig
+# see also https://github.com/lxc/lxc/blob/lxc-1.0.2/src/lxc/lxc-checkconfig.in
+
+possibleConfigs="
+	/proc/config.gz
+	/boot/config-$(uname -r)
+	/usr/src/linux-$(uname -r)/.config
+	/usr/src/linux/.config
+"
+
+if [ $# -gt 0 ]; then
+	CONFIG="$1"
+else
+	: "${CONFIG:=/proc/config.gz}"
+fi
+
+if ! command -v zgrep > /dev/null 2>&1; then
+	zgrep() {
+		zcat "$2" | grep "$1"
+	}
+fi
+
+useColor=true
+if [ "$NO_COLOR" = "1" ] || [ ! -t 1 ]; then
+	useColor=false
+fi
+kernelVersion="$(uname -r)"
+kernelMajor="${kernelVersion%%.*}"
+kernelMinor="${kernelVersion#$kernelMajor.}"
+kernelMinor="${kernelMinor%%.*}"
+
+is_set() {
+	zgrep "CONFIG_$1=[y|m]" "$CONFIG" > /dev/null
+}
+is_set_in_kernel() {
+	zgrep "CONFIG_$1=y" "$CONFIG" > /dev/null
+}
+is_set_as_module() {
+	zgrep "CONFIG_$1=m" "$CONFIG" > /dev/null
+}
+
+color() {
+	# if stdout is not a terminal, then don't do color codes.
+	if [ "$useColor" = "false" ]; then
+		return 0
+	fi
+	codes=
+	if [ "$1" = 'bold' ]; then
+		codes='1'
+		shift
+	fi
+	if [ "$#" -gt 0 ]; then
+		code=
+		case "$1" in
+			# see https://en.wikipedia.org/wiki/ANSI_escape_code#Colors
+			black) code=30 ;;
+			red) code=31 ;;
+			green) code=32 ;;
+			yellow) code=33 ;;
+			blue) code=34 ;;
+			magenta) code=35 ;;
+			cyan) code=36 ;;
+			white) code=37 ;;
+		esac
+		if [ "$code" ]; then
+			codes="${codes:+$codes;}$code"
+		fi
+	fi
+	printf '\033[%sm' "$codes"
+}
+wrap_color() {
+	text="$1"
+	shift
+	color "$@"
+	printf '%s' "$text"
+	color reset
+	echo
+}
+
+wrap_good() {
+	echo "$(wrap_color "$1" white): $(wrap_color "$2" green)"
+}
+wrap_bad() {
+	echo "$(wrap_color "$1" bold): $(wrap_color "$2" bold red)"
+}
+wrap_warning() {
+	wrap_color >&2 "$*" red
+}
+
+check_flag() {
+	if is_set_in_kernel "$1"; then
+		wrap_good "CONFIG_$1" 'enabled'
+	elif is_set_as_module "$1"; then
+		wrap_good "CONFIG_$1" 'enabled (as module)'
+	else
+		wrap_bad "CONFIG_$1" 'missing'
+		EXITCODE=1
+	fi
+}
+
+check_flags() {
+	for flag in "$@"; do
+		printf -- '- '
+		check_flag "$flag"
+	done
+}
+
+check_command() {
+	if command -v "$1" > /dev/null 2>&1; then
+		wrap_good "$1 command" 'available'
+	else
+		wrap_bad "$1 command" 'missing'
+		EXITCODE=1
+	fi
+}
+
+check_device() {
+	if [ -c "$1" ]; then
+		wrap_good "$1" 'present'
+	else
+		wrap_bad "$1" 'missing'
+		EXITCODE=1
+	fi
+}
+
+check_sysctl() {
+	val=$(sysctl -n $1)
+	want=$2
+	if [ "$val" = "$want" ]; then
+		wrap_good "sysctl $1" "enabled"
+	else
+		wrap_bad "sysctl $1" "disabled"
+	fi
+}
+
+if [ ! -e "$CONFIG" ]; then
+	wrap_warning "warning: $CONFIG does not exist, searching other paths for kernel config ..."
+	for tryConfig in $possibleConfigs; do
+		if [ -e "$tryConfig" ]; then
+			CONFIG="$tryConfig"
+			break
+		fi
+	done
+	if [ ! -e "$CONFIG" ]; then
+		wrap_warning "error: cannot find kernel config"
+		wrap_warning "  try running this script again, specifying the kernel config:"
+		wrap_warning "    CONFIG=/path/to/kernel/.config $0 or $0 /path/to/kernel/.config"
+		exit 1
+	fi
+fi
+
+wrap_color "info: reading kernel config from $CONFIG ..." white
+echo
+
+echo 'Generally Necessary:'
+
+printf -- '- '
+if [ "$(stat -f -c %t /sys/fs/cgroup 2> /dev/null)" = '63677270' ]; then
+	wrap_good 'cgroup hierarchy' 'cgroupv2'
+	cgroupv2ControllerFile='/sys/fs/cgroup/cgroup.controllers'
+	if [ -f "$cgroupv2ControllerFile" ]; then
+		echo '  Controllers:'
+		for controller in cpu cpuset io memory pids; do
+			if grep -qE '(^| )'"$controller"'($| )' "$cgroupv2ControllerFile"; then
+				echo "  - $(wrap_good "$controller" 'available')"
+			else
+				echo "  - $(wrap_bad "$controller" 'missing')"
+			fi
+		done
+	else
+		wrap_bad "$cgroupv2ControllerFile" 'nonexistent??'
+	fi
+	# TODO find an efficient way to check if cgroup.freeze exists in subdir
+else
+	cgroupSubsystemDir="$(sed -rne '/^[^ ]+ ([^ ]+) cgroup ([^ ]*,)?(cpu|cpuacct|cpuset|devices|freezer|memory)[, ].*$/ { s//\1/p; q }' /proc/mounts)"
+	cgroupDir="$(dirname "$cgroupSubsystemDir")"
+	if [ -d "$cgroupDir/cpu" ] || [ -d "$cgroupDir/cpuacct" ] || [ -d "$cgroupDir/cpuset" ] || [ -d "$cgroupDir/devices" ] || [ -d "$cgroupDir/freezer" ] || [ -d "$cgroupDir/memory" ]; then
+		echo "$(wrap_good 'cgroup hierarchy' 'properly mounted') [$cgroupDir]"
+	else
+		if [ "$cgroupSubsystemDir" ]; then
+			echo "$(wrap_bad 'cgroup hierarchy' 'single mountpoint!') [$cgroupSubsystemDir]"
+		else
+			wrap_bad 'cgroup hierarchy' 'nonexistent??'
+		fi
+		EXITCODE=1
+		echo "    $(wrap_color '(see https://github.com/tianon/cgroupfs-mount)' yellow)"
+	fi
+fi
+
+if [ "$(cat /sys/module/apparmor/parameters/enabled 2> /dev/null)" = 'Y' ]; then
+	printf -- '- '
+	if command -v apparmor_parser > /dev/null 2>&1; then
+		wrap_good 'apparmor' 'enabled and tools installed'
+	else
+		wrap_bad 'apparmor' 'enabled, but apparmor_parser missing'
+		printf '    '
+		if command -v apt-get > /dev/null 2>&1; then
+			wrap_color '(use "apt-get install apparmor" to fix this)'
+		elif command -v yum > /dev/null 2>&1; then
+			wrap_color '(your best bet is "yum install apparmor-parser")'
+		else
+			wrap_color '(look for an "apparmor" package for your distribution)'
+		fi
+		EXITCODE=1
+	fi
+fi
+
+check_flags \
+	NAMESPACES NET_NS PID_NS IPC_NS UTS_NS \
+	CGROUPS CGROUP_CPUACCT CGROUP_DEVICE CGROUP_FREEZER CGROUP_SCHED CPUSETS MEMCG \
+	KEYS \
+	VETH BRIDGE BRIDGE_NETFILTER \
+	IP_NF_FILTER IP_NF_MANGLE IP_NF_TARGET_MASQUERADE \
+	IP6_NF_FILTER IP6_NF_MANGLE IP6_NF_TARGET_MASQUERADE \
+	NETFILTER_XT_MATCH_ADDRTYPE \
+	NETFILTER_XT_MATCH_CONNTRACK \
+	NETFILTER_XT_MATCH_IPVS \
+	NETFILTER_XT_MARK \
+	IP_NF_RAW IP_NF_NAT NF_NAT \
+	IP6_NF_RAW IP6_NF_NAT NF_NAT \
+	POSIX_MQUEUE
+# (POSIX_MQUEUE is required for bind-mounting /dev/mqueue into containers)
+
+if [ "$kernelMajor" -lt 4 ] || ([ "$kernelMajor" -eq 4 ] && [ "$kernelMinor" -lt 8 ]); then
+	check_flags DEVPTS_MULTIPLE_INSTANCES
+fi
+
+if [ "$kernelMajor" -lt 5 ] || [ "$kernelMajor" -eq 5 -a "$kernelMinor" -le 1 ]; then
+	check_flags NF_NAT_IPV4
+fi
+
+if [ "$kernelMajor" -lt 5 ] || [ "$kernelMajor" -eq 5 -a "$kernelMinor" -le 2 ]; then
+	check_flags NF_NAT_NEEDED
+fi
+# check availability of BPF_CGROUP_DEVICE support
+if [ "$kernelMajor" -ge 5 ] || ([ "$kernelMajor" -eq 4 ] && [ "$kernelMinor" -ge 15 ]); then
+	check_flags CGROUP_BPF
+fi
+
+echo
+
+echo 'Optional Features:'
+{
+	check_flags USER_NS
+}
+{
+	check_flags SECCOMP
+	check_flags SECCOMP_FILTER
+}
+{
+	check_flags CGROUP_PIDS
+}
+{
+	# Kernel v5.8+ removes MEMCG_SWAP_ENABLED and deprecates MEMCG_SWAP.
+	if [ "$kernelMajor" -lt 5 ] || [ "$kernelMajor" -eq 5 -a "$kernelMinor" -lt 8 ]; then
+		CODE=${EXITCODE}
+		check_flags MEMCG_SWAP MEMCG_SWAP_ENABLED
+		# FIXME this check is cgroupv1-specific
+		if [ -e /sys/fs/cgroup/memory/memory.memsw.limit_in_bytes ]; then
+			echo "    $(wrap_color '(cgroup swap accounting is currently enabled)' bold black)"
+			EXITCODE=${CODE}
+		elif is_set MEMCG_SWAP && ! is_set MEMCG_SWAP_ENABLED; then
+			echo "    $(wrap_color '(cgroup swap accounting is currently not enabled, you can enable it by setting boot option "swapaccount=1")' bold black)"
+		fi
+	else
+		# Kernel v5.8+ enables swap accounting by default.
+		echo "    $(wrap_color '(cgroup swap accounting is currently enabled)' bold black)"
+	fi
+}
+{
+	if is_set LEGACY_VSYSCALL_NATIVE; then
+		printf -- '- '
+		wrap_bad "CONFIG_LEGACY_VSYSCALL_NATIVE" 'enabled'
+		echo "    $(wrap_color '(dangerous, provides an ASLR-bypassing target with usable ROP gadgets.)' bold black)"
+	elif is_set LEGACY_VSYSCALL_EMULATE; then
+		printf -- '- '
+		wrap_good "CONFIG_LEGACY_VSYSCALL_EMULATE" 'enabled'
+	elif is_set LEGACY_VSYSCALL_NONE; then
+		printf -- '- '
+		wrap_bad "CONFIG_LEGACY_VSYSCALL_NONE" 'enabled'
+		echo "    $(wrap_color '(containers using eglibc <= 2.13 will not work. Switch to' bold black)"
+		echo "    $(wrap_color ' "CONFIG_VSYSCALL_[NATIVE|EMULATE]" or use "vsyscall=[native|emulate]"' bold black)"
+		echo "    $(wrap_color ' on kernel command line. Note that this will disable ASLR for the,' bold black)"
+		echo "    $(wrap_color ' VDSO which may assist in exploiting security vulnerabilities.)' bold black)"
+	# else Older kernels (prior to 3dc33bd30f3e, released in v4.40-rc1) do
+	#      not have these LEGACY_VSYSCALL options and are effectively
+	#      LEGACY_VSYSCALL_EMULATE. Even older kernels are presumably
+	#      effectively LEGACY_VSYSCALL_NATIVE.
+	fi
+}
+
+if [ "$kernelMajor" -lt 4 ] || ([ "$kernelMajor" -eq 4 ] && [ "$kernelMinor" -le 5 ]); then
+	check_flags MEMCG_KMEM
+fi
+
+if [ "$kernelMajor" -lt 3 ] || ([ "$kernelMajor" -eq 3 ] && [ "$kernelMinor" -le 18 ]); then
+	check_flags RESOURCE_COUNTERS
+fi
+
+if [ "$kernelMajor" -lt 3 ] || ([ "$kernelMajor" -eq 3 ] && [ "$kernelMinor" -le 13 ]); then
+	netprio=NETPRIO_CGROUP
+else
+	netprio=CGROUP_NET_PRIO
+fi
+
+if [ "$kernelMajor" -lt 5 ]; then
+	check_flags IOSCHED_CFQ CFQ_GROUP_IOSCHED
+fi
+
+check_flags \
+	BLK_CGROUP BLK_DEV_THROTTLING \
+	CGROUP_PERF \
+	CGROUP_HUGETLB \
+	NET_CLS_CGROUP $netprio \
+	CFS_BANDWIDTH FAIR_GROUP_SCHED \
+	IP_NF_TARGET_REDIRECT \
+	IP_SCTP \
+	IP_VS \
+	IP_VS_NFCT \
+	IP_VS_PROTO_TCP \
+	IP_VS_PROTO_UDP \
+	IP_VS_RR \
+	SECURITY_SELINUX \
+	SECURITY_APPARMOR
+
+check_flags \
+	NFT_CT \
+	NFT_FIB_IPV4 \
+	NFT_FIB_IPV6 \
+	NFT_FIB \
+	NFT_MASQ \
+	NFT_NAT \
+	NF_TABLES
+
+if ! is_set EXT4_USE_FOR_EXT2; then
+	check_flags EXT3_FS EXT3_FS_XATTR EXT3_FS_POSIX_ACL EXT3_FS_SECURITY
+	if ! is_set EXT3_FS || ! is_set EXT3_FS_XATTR || ! is_set EXT3_FS_POSIX_ACL || ! is_set EXT3_FS_SECURITY; then
+		echo "    $(wrap_color '(enable these ext3 configs if you are using ext3 as backing filesystem)' bold black)"
+	fi
+fi
+
+check_flags EXT4_FS EXT4_FS_POSIX_ACL EXT4_FS_SECURITY
+if ! is_set EXT4_FS || ! is_set EXT4_FS_POSIX_ACL || ! is_set EXT4_FS_SECURITY; then
+	if is_set EXT4_USE_FOR_EXT2; then
+		echo "    $(wrap_color 'enable these ext4 configs if you are using ext3 or ext4 as backing filesystem' bold black)"
+	else
+		echo "    $(wrap_color 'enable these ext4 configs if you are using ext4 as backing filesystem' bold black)"
+	fi
+fi
+
+echo '- Network Drivers:'
+echo "  - \"$(wrap_color 'bridge' blue)\":"
+check_sysctl net.ipv4.ip_forward 1 | sed 's/^/    - /'
+check_sysctl net.ipv6.conf.all.forwarding 1 | sed 's/^/    - /'
+check_sysctl net.ipv6.conf.default.forwarding 1 | sed 's/^/    - /'
+echo "  - \"$(wrap_color 'overlay' blue)\":"
+check_flags VXLAN BRIDGE_VLAN_FILTERING | sed 's/^/    /'
+echo '      Optional (for encrypted networks):'
+check_flags CRYPTO CRYPTO_AEAD CRYPTO_GCM CRYPTO_SEQIV CRYPTO_GHASH \
+	XFRM XFRM_USER XFRM_ALGO INET_ESP NETFILTER_XT_MATCH_BPF | sed 's/^/      /'
+if [ "$kernelMajor" -lt 5 ] || [ "$kernelMajor" -eq 5 -a "$kernelMinor" -le 3 ]; then
+	check_flags INET_XFRM_MODE_TRANSPORT | sed 's/^/      /'
+fi
+echo "  - \"$(wrap_color 'ipvlan' blue)\":"
+check_flags IPVLAN | sed 's/^/    /'
+echo "  - \"$(wrap_color 'macvlan' blue)\":"
+check_flags MACVLAN DUMMY | sed 's/^/    /'
+echo "  - \"$(wrap_color 'ftp,tftp client in container' blue)\":"
+check_flags NF_NAT_FTP NF_CONNTRACK_FTP NF_NAT_TFTP NF_CONNTRACK_TFTP | sed 's/^/    /'
+
+# only fail if no storage drivers available
+CODE=${EXITCODE}
+EXITCODE=0
+STORAGE=1
+
+echo '- Storage Drivers:'
+echo "  - \"$(wrap_color 'btrfs' blue)\":"
+check_flags BTRFS_FS | sed 's/^/    /'
+check_flags BTRFS_FS_POSIX_ACL | sed 's/^/    /'
+[ "$EXITCODE" = 0 ] && STORAGE=0
+EXITCODE=0
+
+echo "  - \"$(wrap_color 'overlay' blue)\":"
+check_flags OVERLAY_FS | sed 's/^/    /'
+[ "$EXITCODE" = 0 ] && STORAGE=0
+EXITCODE=0
+
+echo "  - \"$(wrap_color 'zfs' blue)\":"
+printf '    - '
+check_device /dev/zfs
+printf '    - '
+check_command zfs
+printf '    - '
+check_command zpool
+[ "$EXITCODE" = 0 ] && STORAGE=0
+EXITCODE=0
+
+EXITCODE=$CODE
+[ "$STORAGE" = 1 ] && EXITCODE=1
+
+echo
+
+check_limit_over() {
+	if [ "$(cat "$1")" -le "$2" ]; then
+		wrap_bad "- $1" "$(cat "$1")"
+		wrap_color "    This should be set to at least $2, for example set: sysctl -w kernel/keys/root_maxkeys=1000000" bold black
+		EXITCODE=1
+	else
+		wrap_good "- $1" "$(cat "$1")"
+	fi
+}
+
+echo 'Limits:'
+check_limit_over /proc/sys/kernel/keys/root_maxkeys 10000
+echo
+
+exit $EXITCODE
--- a/external/packages/bsp/overlays_cix/etc/gdm3/daemon.conf
+++ b/external/packages/bsp/overlays_cix/etc/gdm3/daemon.conf
@ -0,0 +1,29 @@
+# GDM configuration storage
+#
+# See /usr/share/gdm/gdm.schemas for a list of available options.
+
+[daemon]
+# Uncomment the line below to force the login screen to use Xorg
+XorgEnable=false
+#WaylandEnable=true
+
+# Enabling automatic login
+AutomaticLoginEnable = true
+AutomaticLogin = orangepi
+
+# Enabling timed login
+#  TimedLoginEnable = true
+#  TimedLogin = user1
+#  TimedLoginDelay = 10
+
+[security]
+
+[xdmcp]
+
+[chooser]
+
+[debug]
+# Uncomment the line below to turn on debugging
+# More verbose logs
+# Additionally lets the X server dump core if it crashes
+#Enable=true
--- a/external/packages/bsp/overlays_cix/etc/modprobe.d/blacklist.conf
+++ b/external/packages/bsp/overlays_cix/etc/modprobe.d/blacklist.conf
@ -0,0 +1,5 @@
+blacklist r8125
+blacklist pgdrv
+blacklist rtk_btusb
+blacklist amdgpu
+blacklist armcb_isp
--- a/external/packages/bsp/overlays_cix/etc/profile.d/cix_env.sh
+++ b/external/packages/bsp/overlays_cix/etc/profile.d/cix_env.sh
@ -0,0 +1,4 @@
+export KWIN_COMPOSE=O2ES
+export QT_OPENGL=es2
+export GDK_GL=gles
+export GST_GL_API=gles2
--- a/external/packages/bsp/overlays_cix/etc/update-motd.d/41-orangepi-config
+++ b/external/packages/bsp/overlays_cix/etc/update-motd.d/41-orangepi-config
@ -0,0 +1,30 @@
+#!/bin/bash
+#
+# Copyright (c) Authors: https://www.armbian.com/authors
+#
+# This file is licensed under the terms of the GNU General Public
+# License version 2. This program is licensed "as is" without any
+# warranty of any kind, whether express or implied.
+
+# DO NOT EDIT THIS FILE but add config options to /etc/default/orangepi-motd
+# any changes will be lost on board support package update
+
+THIS_SCRIPT="config"
+MOTD_DISABLE=""
+
+[[ -f /etc/default/orangepi-motd ]] && . /etc/default/orangepi-motd
+
+for f in $MOTD_DISABLE; do
+	[[ $f == $THIS_SCRIPT ]] && exit 0
+done
+
+#if [[ $(( $RANDOM % 2 )) == 0 ]]; then
+#	if [[ -f /usr/sbin/orangepi-config ]]; then
+#		echo -e "[\e[31m General system configuration (beta)\e[0m: \e[1morangepi-config\e[0m ]\n"
+#	else
+#		echo -e "[\e[31m Menu-driven system configuration (beta)\e[0m: \e[1msudo dpkg -i orangepi-config.deb\e[0m ]\n"
+#	fi
+#fi
+
+exit 0
+
--- a/external/packages/bsp/overlays_cix/opt/video_h265.mp4
+++ b/external/packages/bsp/overlays_cix/opt/video_h265.mp4
--- a/external/packages/bsp/overlays_cix/usr/bin/blink_gpio.sh
+++ b/external/packages/bsp/overlays_cix/usr/bin/blink_gpio.sh
@ -0,0 +1,32 @@
+#!/bin/bash
+
+# 检查至少提供一个 GPIO 引脚
+if [ "$#" -lt 1 ]; then
+    echo "Usage: $0 gpio_number1 [gpio_number2 ... gpio_numberN]"
+    exit 1
+fi
+
+# 导出和设置方向为输出
+for gpio in "$@"; do
+    if [ ! -e "/sys/class/gpio/gpio${gpio}" ]; then
+        echo "Exporting GPIO $gpio"
+        echo $gpio > /sys/class/gpio/export
+    fi
+    echo "Setting GPIO $gpio direction to out"
+    echo "out" > /sys/class/gpio/gpio${gpio}/direction
+done
+
+# 闪烁逻辑
+while true; do
+    # 设置 GPIO 高电平
+    for gpio in "$@"; do
+        echo 1 > /sys/class/gpio/gpio${gpio}/value
+    done
+    sleep 1  # 调整为所需的闪烁时间间隔
+
+    # 设置 GPIO 低电平
+    for gpio in "$@"; do
+        echo 0 > /sys/class/gpio/gpio${gpio}/value
+    done
+    sleep 1  # 调整为所需的闪烁时间间隔
+done
--- a/external/packages/bsp/overlays_cix/usr/bin/cam1_test.sh
+++ b/external/packages/bsp/overlays_cix/usr/bin/cam1_test.sh
@ -0,0 +1,2 @@
+gst-launch-1.0 v4l2src device=/dev/video1 ! videoconvert ! autovideosink
+
--- a/external/packages/bsp/overlays_cix/usr/bin/cam2_test.sh
+++ b/external/packages/bsp/overlays_cix/usr/bin/cam2_test.sh
@ -0,0 +1 @@
+gst-launch-1.0 v4l2src device=/dev/video3 ! videoconvert ! autovideosink
--- a/external/packages/bsp/overlays_cix/usr/bin/dt_gpio_all_blink.sh
+++ b/external/packages/bsp/overlays_cix/usr/bin/dt_gpio_all_blink.sh
@ -0,0 +1,3 @@
+#!/bin/bash
+
+blink_gpio.sh 65 64 106 32 33 108 17 14 18 57 37 40 41 66 69 114 115 34 109 35 36 15 16 56 38 39 70 71 
--- a/external/packages/bsp/overlays_cix/usr/bin/dual_cam_test.sh
+++ b/external/packages/bsp/overlays_cix/usr/bin/dual_cam_test.sh
@ -0,0 +1,6 @@
+#gst-launch-1.0 v4l2src device=/dev/video1 ! videoconvert ! autovideosink &
+gst-launch-1.0 v4l2src device=/dev/video1 ! videoconvert ! autovideosink \
+			   v4l2src device=/dev/video3 ! videoconvert ! autovideosink
+
+#gst-launch-1.0 v4l2src device=/dev/video3 ! videoconvert ! autovideosink &
+
--- a/external/packages/bsp/overlays_cix/usr/bin/gpu_utilization_clock_tracing
+++ b/external/packages/bsp/overlays_cix/usr/bin/gpu_utilization_clock_tracing
--- a/external/packages/bsp/overlays_cix/usr/bin/install_bt_panel.sh
+++ b/external/packages/bsp/overlays_cix/usr/bin/install_bt_panel.sh
@ -0,0 +1,4 @@
+#!/bin/bash
+
+wget -O install.sh  \
+http://download.bt.cn/install/install-ubuntu_6.0.sh && sudo bash install.sh
--- a/external/packages/bsp/overlays_cix/usr/bin/install_qt.sh
+++ b/external/packages/bsp/overlays_cix/usr/bin/install_qt.sh
@ -0,0 +1,24 @@
+#!/bin/bash
+
+release=$(lsb_release -cs)
+
+sudo apt update
+if [[ $release =~ focal|bionic|buster ]]; then
+	sudo apt-get -y install qt5-default qttools5-dev-tools qtbase5-doc-html qt5-assistant qt5-doc
+elif [[ $release =~ bullseye|bookworm|jammy ]]; then
+	sudo apt-get -y install qttools5-dev-tools qtbase5-doc-html qt5-assistant qt5-doc qt5-qmake qt5-qmake-bin
+else
+	echo "Unsupported system!"
+	exit
+fi
+
+sudo apt-get -y install qtcreator qmlscene gdb qtdeclarative5-dev qtbase5-examples cmake
+
+if [[ $release =~ bookworm ]]; then
+	sudo apt-get -y install qt6-wayland qtwayland5
+	sudo apt-get -y install libegl1-mesa-dev libgles2-mesa-dev
+fi
+
+sudo chown orangepi:orangepi /usr/lib/aarch64-linux-gnu/qt5/examples -R
+
+qmake -v
--- a/external/packages/bsp/overlays_cix/usr/bin/isp_app
+++ b/external/packages/bsp/overlays_cix/usr/bin/isp_app
--- a/external/packages/bsp/overlays_cix/usr/bin/reset_ssh.sh
+++ b/external/packages/bsp/overlays_cix/usr/bin/reset_ssh.sh
@ -0,0 +1,4 @@
+#!/bin/bash
+
+sudo rm /etc/ssh/ssh_host_*
+sudo dpkg-reconfigure openssh-server
--- a/external/packages/bsp/overlays_cix/usr/bin/serial
+++ b/external/packages/bsp/overlays_cix/usr/bin/serial
--- a/external/packages/bsp/overlays_cix/usr/bin/usb_gadget_setup.sh
+++ b/external/packages/bsp/overlays_cix/usr/bin/usb_gadget_setup.sh
@ -0,0 +1,84 @@
+#!/bin/bash
+
+# USB Gadget 配置脚本
+# 功能：将设备配置为 USB NCM (网络控制模型) 设备
+
+set -e  # 遇到任何错误立即退出
+
+GADGET_DIR="/sys/kernel/config/usb_gadget/g1"
+
+echo "正在设置 USB NCM Gadget..."
+
+# 检查是否以 root 权限运行
+if [ "$EUID" -ne  0 ]; then
+    echo "错误：请使用 sudo 或以 root 用户运行此脚本"
+    exit 1
+fi
+
+# 检查 configfs 是否已挂载
+if ! mountpoint -q /sys/kernel/config; then
+    echo "挂载 configfs..."
+    mount -t configfs none /sys/kernel/config || {
+        echo "错误：无法挂载 configfs"
+        exit 1
+    }
+fi
+
+# 清理现有配置（如果存在）
+if [ -d "$GADGET_DIR" ]; then
+    echo "清理现有 gadget 配置..."
+    echo "" > "$GADGET_DIR/UDC" 2>/dev/null || true
+    rm -f "$GADGET_DIR/configs/c.1/ncm.usb0"
+    rmdir "$GADGET_DIR/configs/c.1/strings/0x409" 2>/dev/null || true
+    rmdir "$GADGET_DIR/configs/c.1" 2>/dev/null || true
+    rmdir "$GADGET_DIR/functions/ncm.usb0" 2>/dev/null || true
+    rmdir "$GADGET_DIR/strings/0x409" 2>/dev/null || true
+    rmdir "$GADGET_DIR" 2>/dev/null || true
+    sleep 1
+fi
+
+# 创建 gadget 目录
+echo "创建 gadget 目录..."
+mkdir "$GADGET_DIR"
+
+# 设置 USB 设备描述符
+echo "设置设备描述符..."
+echo 0x35b1 > "$GADGET_DIR/idVendor"
+echo 0x0009 > "$GADGET_DIR/idProduct"
+echo 0x0200 > "$GADGET_DIR/bcdDevice"
+echo 0x0210 > "$GADGET_DIR/bcdUSB"
+echo "super-speed-plus" > "$GADGET_DIR/max_speed"
+
+# 设置字符串描述符
+echo "设置字符串描述符..."
+mkdir -m 0770 "$GADGET_DIR/strings/0x409"
+echo "0123456789ABCDEF" > "$GADGET_DIR/strings/0x409/serialnumber"
+echo "cix" > "$GADGET_DIR/strings/0x409/manufacturer"
+echo "USB ncm Device" > "$GADGET_DIR/strings/0x409/product"
+
+# 创建配置
+echo "创建配置..."
+mkdir -m 0770 "$GADGET_DIR/configs/c.1"
+mkdir -m 0770 "$GADGET_DIR/configs/c.1/strings/0x409"
+echo "ncm" > "$GADGET_DIR/configs/c.1/strings/0x409/configuration"
+
+# 创建 NCM 功能
+echo "创建 NCM 功能..."
+mkdir "$GADGET_DIR/functions/ncm.usb0"
+
+# 将功能链接到配置
+echo "链接功能到配置..."
+ln -s "$GADGET_DIR/functions/ncm.usb0" "$GADGET_DIR/configs/c.1/"
+
+# 启用 gadget
+echo "启用 USB 设备控制器..."
+UDC_DEVICE=$(ls /sys/class/udc/ | head -n1)
+if [ -n "$UDC_DEVICE" ]; then
+    echo "$UDC_DEVICE" > "$GADGET_DIR/UDC"
+    echo "已启用 UDC: $UDC_DEVICE"
+else
+    echo "警告：未找到可用的 UDC 设备"
+fi
+
+echo "USB NCM Gadget 配置完成！"
+echo "设备现在应该被识别为 USB 网络设备"
--- a/external/packages/bsp/overlays_cix/usr/bin/v4l2_videos.sh
+++ b/external/packages/bsp/overlays_cix/usr/bin/v4l2_videos.sh
@ -0,0 +1,11 @@
+#!/bin/bash
+
+echo "Video Device and Name Correspondence:"
+echo "====================================="
+for dev in /dev/video*; do
+    dev_name=$(basename $dev)
+    if [ -f "/sys/class/video4linux/${dev_name}/name" ]; then
+        name=$(cat "/sys/class/video4linux/${dev_name}/name")
+        echo "$dev : $name"
+    fi
+done
--- a/external/packages/bsp/overlays_cix/usr/bin/vpu_test.sh
+++ b/external/packages/bsp/overlays_cix/usr/bin/vpu_test.sh
@ -0,0 +1,27 @@
+#!/bin/bash
+
+echo 3 | sudo tee /sys/kernel/debug/amvx/log/group/perf/enable > /dev/null
+
+echo "开始监控VPU使用率（只显示大于0的情况）..."
+echo "按 Ctrl+C 停止监控"
+
+while true
+do
+    # 读取VPU使用率
+    utilization=$(sudo cat /sys/kernel/debug/amvx/log/group/perf/utilization | awk '{print $3}' | tr -d '%')
+
+    # 只有当使用率大于0时才输出
+    if (( $(echo "$utilization > 0" | bc -l) )); then
+        # 获取当前时间
+        current_time=$(date '+%H:%M:%S')
+
+        # 读取实时FPS信息
+        fps_info=$(sudo cat /sys/kernel/debug/amvx/log/group/perf/realtime_fps)
+
+        # 输出信息
+        echo "VPU Utilization: ${utilization}%"
+        if [ -n "$fps_info" ] && [ "$fps_info" != "null" ]; then
+            echo "$current_time $fps_info"
+        fi
+    fi
+done
--- a/external/packages/bsp/overlays_cix/usr/lib/systemd/system/isp-daemon.service
+++ b/external/packages/bsp/overlays_cix/usr/lib/systemd/system/isp-daemon.service
@ -0,0 +1,15 @@
+[Unit]
+Description=ISP Daemon
+After=network.target load-isp-modules.service
+
+[Service]
+Type=simple
+Environment=LD_LIBRARY_PATH="/usr/share/cix/lib"
+ExecStart=/usr/bin/isp_app -s 0 &
+Restart=always
+RestartSec=1
+StartLimitInterval=10
+StartLimitBurst=5
+
+[Install]
+WantedBy=multi-user.target
--- a/external/packages/bsp/overlays_cix/usr/share/backgrounds/orangepi/orangepi-default.png
+++ b/external/packages/bsp/overlays_cix/usr/share/backgrounds/orangepi/orangepi-default.png
--- a/external/packages/bsp/overlays_cix/usr/src/uart_test/serial.c
+++ b/external/packages/bsp/overlays_cix/usr/src/uart_test/serial.c
@ -0,0 +1,79 @@
+#include <stdio.h>
+#include <unistd.h>
+#include <fcntl.h>
+#include <termios.h>
+#include <string.h>
+#include <errno.h>
+
+int main(int argc, char *argv[]) {
+    if (argc < 2) {
+        printf("Usage: %s <serialport>\n", argv[0]);
+        return 1;
+    }
+
+    char *portname = argv[1];
+
+    // 打开串口
+    int fd = open(portname, O_RDWR | O_NOCTTY | O_SYNC);
+    if (fd < 0) {
+        printf("Error opening %s: %s\n", portname, strerror(errno));
+        return -1;
+    }
+
+    // 配置串口
+    struct termios tty;
+    memset(&tty, 0, sizeof tty);
+    if (tcgetattr(fd, &tty) != 0) {
+        printf("Error from tcgetattr: %s\n", strerror(errno));
+        return -1;
+    }
+
+    cfsetospeed(&tty, B115200); // 设置波特率为 115200
+    cfsetispeed(&tty, B115200);
+
+    tty.c_cflag = (tty.c_cflag & ~CSIZE) | CS8;     // 8-bit chars
+    tty.c_iflag &= ~IGNBRK;                         // 禁用break处理
+    tty.c_lflag = 0;                                // 不使用规范模式
+    tty.c_oflag = 0;                                // 不执行输出处理
+    tty.c_cc[VMIN]  = 0;                            // 读取不需要字符
+    tty.c_cc[VTIME] = 5;                            // 0.5秒超时
+
+    tty.c_iflag &= ~(IXON | IXOFF | IXANY);         // 关闭流控制
+    tty.c_cflag |= (CLOCAL | CREAD);                // 忽略调制解调器状态线，开启接收
+    tty.c_cflag &= ~(PARENB | PARODD);              // 关闭奇偶校验
+    tty.c_cflag &= ~CSTOPB;                         // 无停止位
+    tty.c_cflag &= ~CRTSCTS;                        // 禁用硬件流控制
+
+    if (tcsetattr(fd, TCSANOW, &tty) != 0) {
+        printf("Error from tcsetattr: %s\n", strerror(errno));
+        return -1;
+    }
+
+    // 向串口写数据
+    char *msg = "Hello, Serial Port!\n";
+    int wlen = write(fd, msg, strlen(msg));
+    if (wlen != strlen(msg)) {
+        printf("Error from write: %d, %d\n", wlen, errno);
+    }
+    tcdrain(fd); // 等待传输完成
+    printf("W: %s", msg);
+
+    // 从串口读数据
+    unsigned char buf[100];
+    int total_read = 0;
+    int rdlen;
+    while ((rdlen = read(fd, buf + total_read, sizeof(buf) - 1 - total_read)) > 0) {
+        total_read += rdlen;
+        if (total_read >= sizeof(buf) - 1 || buf[total_read - 1] == '\n') {
+            break;
+        }
+    }
+    if (total_read > 0) {
+        buf[total_read] = 0; // 确保字符串正确终止
+        printf("R: %s", buf);
+    }
+    
+    // 关闭串口 - 这部分代码将不会被执行，因为循环是无限的
+    close(fd);
+    return 0;
+}
--- a/scripts/build-cix-image.sh
+++ b/scripts/build-cix-image.sh
@ -0,0 +1,196 @@
+#!/usr/bin/env bash
+
+#  Copyright 2024 Cix Technology Group Co., Ltd.
+#  All Rights Reserved.
+#
+#  The following programs are the sole property of Cix Technology Group Co., Ltd.,
+#  and contain its proprietary and confidential information.
+#
+
+function replace_line_if_exist() {
+    local src=$1
+    local dst=$2
+    local file=$3
+
+    if [[ -e "$file" ]]; then
+        set +E
+        local res=`grep -n "${src}" "${file}"`
+        #echo "res:$res"
+        if [[ ${#res} -gt 0 ]]; then
+            line=`echo "${res}" | cut -d ":" -f 1`
+        fi
+        set -E
+        #echo "line: $line"
+        if [[ $line -gt 0 ]]; then
+            sed -i "${line}c${dst}" "${file}"
+        fi
+    fi
+}
+
+function create_cix_rootfs()
+{
+    display_alert "Preparing" "cix rootfs" "info"
+
+    local PATH_OUT=${SRC}/output/cix
+    local ROOT_FREE_SIZE=4096000
+    rootfs_ext4=${PATH_OUT}/images/rootfs.ext4
+
+    rm -rf ${PATH_OUT} > /dev/null 2>&1
+    mkdir -p ${PATH_OUT}/images > /dev/null 2>&1
+
+    mount --bind --make-private $SDCARD $MOUNT/
+
+    local debianSize=`sudo du ${MOUNT} -d 0 -k | sudo awk -F ' ' '{print $1}'`
+    debianSize=`expr $debianSize \* 13 / 10`
+    if [[ ${debianSize} -lt 1024 ]]; then
+        totalsize='10240'
+    elif [[ ${debianSize} -lt 10240 ]]; then
+        totalsize=`expr $debianSize \* 50 / 10`
+    elif [[ ${debianSize} -lt 102400 ]]; then
+        totalsize=`expr $debianSize \* 25 / 10`
+    elif [[ ${debianSize} -lt 1024000 ]]; then
+        totalsize=`expr $debianSize \* 20 / 10`
+    else
+        totalsize=`expr $debianSize + ${ROOT_FREE_SIZE:-4096000}`
+    fi
+
+    local count=`expr $totalsize / 4`
+    root_uuid=$(uuidgen)
+    boot_uuid=$(uuidgen | tr -d '-' | cut -c1-8 | tr 'a-f' 'A-F')
+    formatted_boot_uuid="${boot_uuid:0:4}-${boot_uuid:4:4}"
+    cat <<-END > ${SDCARD}/etc/fstab
+# /etc/fstab: static file system information.
+#
+# Use 'blkid' to print the universally unique identifier for a device; this may
+# be used with UUID= as a more robust way to name devices that works even if
+# disks are added and removed. See fstab(5).
+#
+# <file system>                           <mount point>   <type>  <options>       <dump>  <pass>
+
+END
+    #echo "UUID=${formatted_boot_uuid} /boot vfat defaults,umask=0077 0 2" >> $MOUNT/etc/fstab
+    #echo "UUID=$root_uuid / ext4 errors=remount-ro 0 1" >> $MOUNT/etc/fstab
+
+    dd if=/dev/zero of="${rootfs_ext4}" bs=4k count=$count > /dev/null 2>&1
+    #mkfs.ext4 -U ${uuid} -F -i 4096 "${rootfs_ext4}" -d "${MOUNT}" > /dev/null 2>&1
+    mkfs.ext4 -F -i 4096 "${rootfs_ext4}" -d "${MOUNT}" > /dev/null 2>&1
+    fsck.ext4 -pvfD "${rootfs_ext4}" > /dev/null 2>&1
+
+    umount $MOUNT
+    rm -rf $MOUNT
+}
+
+function create_cix_image()
+{
+    display_alert "Creating" "cix image" "info"
+
+    local PATH_OUT=${SRC}/output/cix
+    local gpt_btp=${PATH_OUT}/images/partition.bpt
+    local SCRIPT_DIR=${EXTER}/cache/sources/component_cix-${BRANCH}
+
+    if [[ $SELECTED_CONFIGURATION == "cli_standard" ]]; then
+        IMAGE_TYPE=server
+    elif [[ $SELECTED_CONFIGURATION == "cli_minimal" ]]; then
+        IMAGE_TYPE=minimal
+    else
+        IMAGE_TYPE=desktop
+    fi
+    version="${BOARD^}_${REVISION}_${DISTRIBUTION,}_${RELEASE}_${IMAGE_TYPE}"${DESKTOP_ENVIRONMENT:+_$DESKTOP_ENVIRONMENT}"_linux$(grab_version "$LINUXSOURCEDIR")"
+    mkdir -p ${SRC}/output/images/${version}
+    local cix_image_name="${SRC}/output/images/${version}/${version}.img"
+
+    cp -f "${SCRIPT_DIR}/debian/fb/partition.bpt" "${gpt_btp}" || {
+        display_alert "Failed to copy BPT template" "${gpt_btp}" "err"
+        return 1
+    }
+
+    local boot_start=$(expr $(sed -n '6p' ${gpt_btp} | awk '{print $2}') / 1024 / 1024)
+    local boot_size=$(expr $(sed -n '11p' ${gpt_btp} | awk -F '"' '{print $4}' | awk '{print $1}'))
+
+    if [[ ! -f "${rootfs_ext4}" ]]; then
+        display_alert "Rootfs missing" "${rootfs_ext4}" "err"
+        return 1
+    fi
+
+    local rootfs_ext4="${PATH_OUT}/images/rootfs.ext4"
+    local root_size=`du -s -b ${rootfs_ext4} | awk '{print $1}'`
+    root_size=`expr $root_size / 1024 / 1024 + 10`
+    local total_size=`expr $root_size + $boot_size + $boot_start + 1`
+    local root_start=`expr $boot_size + $boot_start`
+    local boot_end=$root_start
+    local root_end=$total_size
+
+    #echo "total size: ${total_size}M"
+    #echo "boot: ${boot_start}, ${boot_end}M"
+    #echo "rootfs: ${root_start}, ${root_end}M"
+
+    replace_line_if_exist "\"disk_size\":" "\ \ \ \ \ \ \ \ \"disk_size\": \"${total_size} MiB\"," "${gpt_btp}"
+    sudo "${SCRIPT_DIR}/debian/fb/bpttool" make_table --input "${gpt_btp}" --output_gpt "${PATH_OUT}/images/partition-table.img" --output_json "${PATH_OUT}/partition-table.json"
+    sudo chown ${USER}:${USER} "${PATH_OUT}/images/partition-table.img"
+
+    boot_size=$(expr $boot_size \* 1024 \* 1024)
+    #echo "boot_start: ${boot_start}Mib, boot_size: ${boot_size} bytes"
+
+    cp "${SCRIPT_DIR}/debian/grub-post-silicon.cfg" "${PATH_OUT}/images/grub.cfg"
+    local root_device_guid=$("${SCRIPT_DIR}/debian/cix_tool" --flash-tool -d "${PATH_OUT}/images/partition-table.img" | grep "PARTITION1, guid:" | awk -F ":" '{print $2}')
+    sed -i "s:root=/dev/nvme0n1p2:root=PARTUUID=${root_device_guid}:g" "${PATH_OUT}/images/grub.cfg"
+    sed -i "s:root=/dev/sda2:root=PARTUUID=${root_device_guid}:g" "${PATH_OUT}/images/grub.cfg"
+
+    local dtb_args=()
+    while IFS= read -r -d $'\0' dtb; do
+        dtb_args+=("${dtb}" "/$(basename "${dtb}")")
+    done < <(find "${LINUXSOURCEDIR}/arch/arm64/boot/dts/cix/" -maxdepth 1 -name "*.dtb" -print0)
+
+    sed -i '3cset default="0"' "${PATH_OUT}/images/grub.cfg"
+    "${SCRIPT_DIR}/tools/mk-part-fat" \
+        -o "${PATH_OUT}/images/boot.img" \
+        -s "${boot_size}" \
+        -l "ESP" \
+        "${SCRIPT_DIR}/grub.efi" "/EFI/BOOT/BOOTAA64.EFI" \
+        "${PATH_OUT}/images/grub.cfg" "/grub/grub.cfg" \
+        "${LINUXSOURCEDIR}/arch/arm64/boot/Image" "/Image" \
+        "${SCRIPT_DIR}/cix_binary/device/images/rootfs.cpio.gz" "/rootfs.cpio.gz" \
+        "${dtb_args[@]}" > /dev/null 2>&1
+
+    fatlabel -i "${PATH_OUT}/images/boot.img" "0x${boot_uuid}"
+
+    dd if=/dev/zero of="${cix_image_name}" bs=1M count=$total_size > /dev/null 2>&1
+    parted -s "${cix_image_name}" mklabel gpt > /dev/null 2>&1
+
+    dd if="${PATH_OUT}/images/partition-table.img" of="${cix_image_name}" conv=notrunc,fsync bs=1M seek=0 > /dev/null 2>&1
+
+    local boot_offset=`"${SCRIPT_DIR}/debian/cix_tool" --flash-tool -d "${PATH_OUT}/images/partition-table.img" -p boot | awk '{print $1}'`
+    boot_offset=`expr $boot_offset \* 512 / 1024 / 1024`
+    #echo "boot offset: $boot_offset M bytes"
+    dd if="${PATH_OUT}/images/boot.img" of="${cix_image_name}" conv=notrunc,fsync bs=1M seek=$boot_offset > /dev/null 2>&1
+
+    local rootfs_offset=`"${SCRIPT_DIR}/debian/cix_tool" --flash-tool -d "${PATH_OUT}/images/partition-table.img" -p root | awk '{print $1}'`
+    rootfs_offset=`expr $rootfs_offset \* 512 / 1024 / 1024`
+    #echo "root offset: $rootfs_offset M bytes"
+    dd if="${rootfs_ext4}" of="${cix_image_name}" conv=notrunc,fsync bs=1M seek=$rootfs_offset > /dev/null 2>&1
+
+    if [[ $COMPRESS_OUTPUTIMAGE == "" || $COMPRESS_OUTPUTIMAGE == no ]]; then
+        COMPRESS_OUTPUTIMAGE="sha,img"
+    elif [[ $COMPRESS_OUTPUTIMAGE == yes ]]; then
+        COMPRESS_OUTPUTIMAGE="sha,xz"
+    fi
+
+    if [[ $COMPRESS_OUTPUTIMAGE == *xz* ]]; then
+        display_alert "Compressing" "${cix_image_name}.xz" "info"
+        # compressing consumes a lot of memory we don't have. Waiting for previous packing job to finish helps to run a lot more builds in parallel
+        available_cpu=$(grep -c 'processor' /proc/cpuinfo)
+        [[ ${available_cpu} -gt 8 ]] && available_cpu=8 # using more cpu cores for compressing is pointless
+        available_mem=$(LC_ALL=c free | grep Mem | awk '{print $4/$2 * 100.0}' | awk '{print int($1)}') # in percentage
+
+        pixz -7 -p ${available_cpu} -f $(expr ${available_cpu} + 2) < $cix_image_name > ${cix_image_name}.xz
+        compression_type=".xz"
+    fi
+
+    if [[ $COMPRESS_OUTPUTIMAGE == *sha* ]]; then
+        cd ${SRC}/output/images/${version}/
+        display_alert "SHA256 calculating" "${version}.img${compression_type}" "info"
+        sha256sum -b ${version}.img${compression_type} > ${version}.img${compression_type}.sha
+    fi
+
+    display_alert "Done building" "$cix_image_name" "info"
+}
--- a/scripts/compilation.sh
+++ b/scripts/compilation.sh
@ -542,6 +542,8 @@ CUSTOM_KERNEL_CONFIG

 	rsync --remove-source-files -rq ./*.deb "${DEB_STORAGE}/" || exit_with_error "Failed moving kernel DEBs"

+	[[ $(type -t family_tweaks_kernel) == function ]] && family_tweaks_kernel
+
 	# store git hash to the file and create a change log
 	#HASHTARGET="${EXTER}/cache/hash"$([[ ${BETA} == yes ]] && echo "-beta")"/linux-image-${BRANCH}-${LINUXFAMILY}"
 	#OLDHASHTARGET=$(head -1 "${HASHTARGET}.githash" 2>/dev/null)
@ -592,7 +594,12 @@ compile_firmware()
 	plugin_dir="orangepi-firmware${FULL}"
 	mkdir -p "${firmwaretempdir}/${plugin_dir}/lib/firmware"

-	[[ $IGNORE_UPDATES != yes ]] && fetch_from_repo "https://github.com/orangepi-xunlong/firmware" "${EXTER}/cache/sources/orangepi-firmware-git" "branch:master"
+	if [[ $GITEE_SERVER == yes ]]; then
+		[[ $IGNORE_UPDATES != yes ]] && fetch_from_repo "https://gitee.com/orangepi-xunlong/firmware" "${EXTER}/cache/sources/orangepi-firmware-git" "branch:master"
+	else
+		[[ $IGNORE_UPDATES != yes ]] && fetch_from_repo "https://github.com/orangepi-xunlong/firmware" "${EXTER}/cache/sources/orangepi-firmware-git" "branch:master"
+	fi
+
 	if [[ -n $FULL ]]; then
 		[[ $IGNORE_UPDATES != yes ]] && fetch_from_repo "$MAINLINE_FIRMWARE_SOURCE" "${EXTER}/cache/sources/linux-firmware-git" "branch:master"
 		# cp : create hardlinks
@ -645,8 +652,13 @@ compile_orangepi-zsh()
 	orangepi_zsh_dir=orangepi-zsh_${REVISION}_all
 	display_alert "Building deb" "orangepi-zsh" "info"

-	[[ $IGNORE_UPDATES != yes ]] && fetch_from_repo "https://github.com/robbyrussell/oh-my-zsh" "${EXTER}/cache/sources/oh-my-zsh" "branch:master"
-	[[ $IGNORE_UPDATES != yes ]] && fetch_from_repo "https://github.com/mroth/evalcache" "${EXTER}/cache/sources/evalcache" "branch:master"
+	if [[ $GITEE_SERVER == yes ]]; then
+		[[ $IGNORE_UPDATES != yes ]] && fetch_from_repo "https://gitee.com/orangepi-xunlong/oh-my-zsh" "${EXTER}/cache/sources/oh-my-zsh" "branch:master"
+		[[ $IGNORE_UPDATES != yes ]] && fetch_from_repo "https://gitee.com/orangepi-xunlong/evalcache" "${EXTER}/cache/sources/evalcache" "branch:master"
+	else
+		[[ $IGNORE_UPDATES != yes ]] && fetch_from_repo "https://github.com/robbyrussell/oh-my-zsh" "${EXTER}/cache/sources/oh-my-zsh" "branch:master"
+		[[ $IGNORE_UPDATES != yes ]] && fetch_from_repo "https://github.com/mroth/evalcache" "${EXTER}/cache/sources/evalcache" "branch:master"
+	fi

 	mkdir -p "${tmp_dir}/${orangepi_zsh_dir}"/{DEBIAN,etc/skel/,etc/oh-my-zsh/,/etc/skel/.oh-my-zsh/cache}

--- a/scripts/configuration.sh
+++ b/scripts/configuration.sh
@ -259,8 +259,12 @@ if [[ $BUILD_DESKTOP == "yes" && -z $DESKTOP_ENVIRONMENT ]]; then
 		for desktop_env_dir in "${DESKTOP_CONFIGS_DIR}/"*; do
 			local desktop_env_name=$(basename ${desktop_env_dir})
 			local expert_infos=""
-			[[ "${EXPERT}" == "yes" ]] && expert_infos="[$(cat "${desktop_env_dir}/support" 2> /dev/null)]"
-			desktop_element_supported "${desktop_env_dir}" "${ARCH}" && options+=("${desktop_env_name}" "${desktop_env_name^} desktop environment ${expert_infos}")
+			if [[ $BOARDFAMILY == "cix" && $desktop_env_name == xfce ]]; then
+				:
+			else
+				[[ "${EXPERT}" == "yes" ]] && expert_infos="[$(cat "${desktop_env_dir}/support" 2> /dev/null)]"
+				desktop_element_supported "${desktop_env_dir}" "${ARCH}" && options+=("${desktop_env_name}" "${desktop_env_name^} desktop environment ${expert_infos}")
+			fi
 		done
 	}

--- a/scripts/debootstrap.sh
+++ b/scripts/debootstrap.sh
@ -90,8 +90,13 @@ PRE_INSTALL_DISTRIBUTION_SPECIFIC
 		display_alert "Starting FEL boot" "$BOARD" "info"
 		source $SRC/scripts/fel-load.sh
 	else
-		prepare_partitions
-		create_image
+		if [[ $BOARDFAMILY == "cix" ]]; then
+			create_cix_rootfs
+			create_cix_image
+		else
+			prepare_partitions
+			create_image
+		fi
 	fi

 	# stage: unmount tmpfs
@ -215,7 +220,7 @@ create_rootfs_cache()
 		cd $SDCARD # this will prevent error sh: 0: getcwd() failed

 		eval 'debootstrap --variant=minbase --include=${DEBOOTSTRAP_LIST// /,} ${PACKAGE_LIST_EXCLUDE:+ --exclude=${PACKAGE_LIST_EXCLUDE// /,}} \
-			--arch=$ARCH --components=${DEBOOTSTRAP_COMPONENTS} $DEBOOTSTRAP_OPTION --foreign ${release_version} $SDCARD/ ${apt_mirror}' \
+			--no-check-gpg --arch=$ARCH --components=${DEBOOTSTRAP_COMPONENTS} $DEBOOTSTRAP_OPTION --foreign ${release_version} $SDCARD/ ${apt_mirror}' \
 			${PROGRESS_LOG_TO_FILE:+' | tee -a $DEST/${LOG_SUBPATH}/debootstrap.log'} \
 			${OUTPUT_DIALOG:+' | dialog --backtitle "$backtitle" --progressbox "Debootstrap (stage 1/2)..." $TTY_Y $TTY_X'} \
 			${OUTPUT_VERYSILENT:+' >/dev/null 2>/dev/null'} ';EVALPIPE=(${PIPESTATUS[@]})'
@ -347,6 +352,7 @@ create_rootfs_cache()

 		install_docker
 		[[ ${BOARDFAMILY} == "starfive2" ]] && jh7110_install_libs
+		[[ ${BOARDFAMILY} == "cix" ]] && install_cix_debs

 		# Remove packages from packages.uninstall

--- a/scripts/distributions.sh
+++ b/scripts/distributions.sh
@ -460,9 +460,6 @@ POST_INSTALL_KERNEL_DEBS
 	[[ -f "${SDCARD}"/usr/bin/gnome-session ]] && sed -i "s/user-session.*/user-session=ubuntu-wayland/" ${SDCARD}/etc/lightdm/lightdm.conf.d/22-orangepi-autologin.conf > /dev/null 2>&1
 	[[ -f "${SDCARD}"/usr/bin/startplasma-x11 ]] && sed -i "s/user-session.*/user-session=plasma-x11/" ${SDCARD}/etc/lightdm/lightdm.conf.d/22-orangepi-autologin.conf

-	# execute $LINUXFAMILY-specific tweaks
-	[[ $(type -t family_tweaks) == function ]] && family_tweaks
-
 	call_extension_method "post_family_tweaks" << 'FAMILY_TWEAKS'
 *customize the tweaks made by $LINUXFAMILY-specific family_tweaks*
 It is run after packages are installed in the rootfs, but before enabling additional services.
@ -636,6 +633,8 @@ FAMILY_TWEAKS
 	# disable MOTD for first boot - we want as clean 1st run as possible
 	chmod -x "${SDCARD}"/etc/update-motd.d/*

+	# execute $LINUXFAMILY-specific tweaks
+	[[ $(type -t family_tweaks) == function ]] && family_tweaks
 }

 install_rclocal()
--- a/scripts/general.sh
+++ b/scripts/general.sh
@ -1425,7 +1425,8 @@ prepare_host()
 	nfs-kernel-server ntpdate p7zip-full parted patchutils pigz pixz          \
 	pkg-config pv python3-dev python3-distutils qemu-user-static rsync swig   \
 	systemd-container u-boot-tools udev unzip uuid-dev wget whiptail zip      \
-	zlib1g-dev gcc-riscv64-linux-gnu"
+	zlib1g-dev gcc-riscv64-linux-gnu uuid-runtime fatattr git-lfs scons       \
+	mtools"

  if [[ $(dpkg --print-architecture) == amd64 ]]; then

@ -1559,21 +1560,30 @@ prepare_host()
 			display_alert "Checking for external GCC compilers" "" "info"
 			# download external Linaro compiler and missing special dependencies since they are needed for certain sources

-		local toolchains=(
-			"ky-toolchain-linux-glibc-x86_64-v1.0.1.tar.xz"
-			"gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz"
-			"gcc-linaro-arm-none-eabi-4.8-2014.04_linux.tar.xz"
-			"gcc-linaro-arm-linux-gnueabihf-4.8-2014.04_linux.tar.xz"
-			"gcc-linaro-4.9.4-2017.01-x86_64_arm-linux-gnueabi.tar.xz"
-			"gcc-linaro-4.9.4-2017.01-x86_64_aarch64-linux-gnu.tar.xz"
-			"gcc-linaro-5.5.0-2017.10-x86_64_arm-linux-gnueabihf.tar.xz"
-			"gcc-linaro-7.4.1-2019.02-x86_64_arm-linux-gnueabi.tar.xz"
-			"gcc-linaro-7.4.1-2019.02-x86_64_aarch64-linux-gnu.tar.xz"
-			"gcc-arm-9.2-2019.12-x86_64-arm-none-linux-gnueabihf.tar.xz"
-			"gcc-arm-9.2-2019.12-x86_64-aarch64-none-linux-gnu.tar.xz"
-			"gcc-arm-11.2-2022.02-x86_64-arm-none-linux-gnueabihf.tar.xz"
-			"gcc-arm-11.2-2022.02-x86_64-aarch64-none-linux-gnu.tar.xz"
-			)
+		case ${BOARDFAMILY} in
+			cix)
+			local toolchains=(
+				"arm-gnu-toolchain-12.3.rel1-x86_64-aarch64-none-linux-gnu.tar.xz"
+				)
+			;;
+			*)
+			local toolchains=(
+				"ky-toolchain-linux-glibc-x86_64-v1.0.1.tar.xz"
+				"gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz"
+				"gcc-linaro-arm-none-eabi-4.8-2014.04_linux.tar.xz"
+				"gcc-linaro-arm-linux-gnueabihf-4.8-2014.04_linux.tar.xz"
+				"gcc-linaro-4.9.4-2017.01-x86_64_arm-linux-gnueabi.tar.xz"
+				"gcc-linaro-4.9.4-2017.01-x86_64_aarch64-linux-gnu.tar.xz"
+				"gcc-linaro-5.5.0-2017.10-x86_64_arm-linux-gnueabihf.tar.xz"
+				"gcc-linaro-7.4.1-2019.02-x86_64_arm-linux-gnueabi.tar.xz"
+				"gcc-linaro-7.4.1-2019.02-x86_64_aarch64-linux-gnu.tar.xz"
+				"gcc-arm-9.2-2019.12-x86_64-arm-none-linux-gnueabihf.tar.xz"
+				"gcc-arm-9.2-2019.12-x86_64-aarch64-none-linux-gnu.tar.xz"
+				"gcc-arm-11.2-2022.02-x86_64-arm-none-linux-gnueabihf.tar.xz"
+				"gcc-arm-11.2-2022.02-x86_64-aarch64-none-linux-gnu.tar.xz"
+				)
+			;;
+		esac

 		USE_TORRENT_STATUS=${USE_TORRENT}
 		USE_TORRENT="no"
@ -1655,6 +1665,11 @@ function webseed ()
 		https://mirrors.bfsu.edu.cn/armbian-releases/
 		)
 	fi
+	if [[ ${filename} == *ky* ]] || [[ ${filename} == *arm-gnu-toolchain* ]]; then
+		WEBSEED=(
+		http://www.iplaystore.cn/upload/
+		)
+	fi
 	for toolchain in ${WEBSEED[@]}; do
 		text="${text} ${toolchain}${1}"
 	done
@ -1681,13 +1696,12 @@ download_and_verify()
 			local server=${ARMBIAN_MIRROR}
        fi

-	if [[ -f ${localdir}/${dirname}/.download-complete ]]; then
-		return
+	if [[ ${filename} == *ky* ]] || [[ ${filename} == *arm-gnu-toolchain* ]]; then
+		server="http://www.iplaystore.cn/upload/"
 	fi

-	if [[ ${filename} == *ky* ]]; then
-		server="http://www.iplaystore.cn/"
-		remotedir=""
+	if [[ -f ${localdir}/${dirname}/.download-complete ]]; then
+		return
 	fi

 	# switch to china mirror if US timeouts
@ -1695,16 +1709,21 @@ download_and_verify()
 	if [[ $? -ne 7 && $? -ne 22 && $? -ne 0 ]]; then
 		display_alert "Timeout from $server" "retrying" "info"
 		server="https://mirrors.tuna.tsinghua.edu.cn/armbian-releases/"
+		if [[ ${filename} == *ky* ]] || [[ ${filename} == *arm-gnu-toolchain* ]]; then
+			server="http://www.iplaystore.cn/upload/"
+		fi

 		# switch to another china mirror if tuna timeouts
 		timeout 10 curl --head --fail --silent ${server}${remotedir}/${filename} 2>&1 >/dev/null
 		if [[ $? -ne 7 && $? -ne 22 && $? -ne 0 ]]; then
 			display_alert "Timeout from $server" "retrying" "info"
 			server="https://mirrors.bfsu.edu.cn/armbian-releases/"
+			if [[ ${filename} == *ky* ]] || [[ ${filename} == *arm-gnu-toolchain* ]]; then
+				server="http://www.iplaystore.cn/upload/"
+			fi
 		fi
 	fi

-
 	# check if file exists on remote server before running aria2 downloader
 	[[ ! `timeout 10 curl --head --fail --silent ${server}${remotedir}/${filename}` ]] && return

@ -1925,9 +1944,9 @@ install_docker() {
 	esac

 	#if [[ ${SELECTED_CONFIGURATION} == desktop ]]; then
-		mirror_url=https://repo.huaweicloud.com
+	#	mirror_url=https://repo.huaweicloud.com
 	#else
-	#	mirror_url=https://mirrors.aliyun.com
+		mirror_url=https://mirrors.aliyun.com
 	#fi

 	chroot "${SDCARD}" /bin/bash -c "curl -fsSL ${mirror_url}/docker-ce/linux/${distributor_id}/gpg | apt-key add -"
--- a/scripts/main.sh
+++ b/scripts/main.sh
@ -84,6 +84,8 @@ source "${SRC}"/scripts/general.sh		# general functions
 source "${SRC}"/scripts/chroot-buildpackages.sh	# chroot packages building
 # shellcheck source=pack.sh
 source "${SRC}"/scripts/pack-uboot.sh
+# shellcheck source=build-cix-image.sh
+source "${SRC}"/scripts/build-cix-image.sh


 # set log path
@ -159,48 +161,6 @@ fi



-# if BUILD_OPT, KERNEL_CONFIGURE, BOARD, BRANCH or RELEASE are not set, display selection menu
-if [[ -z $BUILD_OPT ]]; then
-
-	options+=("u-boot"	 "U-boot package")
-	options+=("kernel"	 "Kernel package")
-	options+=("rootfs"	 "Rootfs and all deb packages")
-	options+=("image"	 "Full OS image for flashing")
-
-	menustr="Compile image | rootfs | kernel | u-boot"
-	BUILD_OPT=$(whiptail --title "${titlestr}" --backtitle "${backtitle}" --notags \
-			  --menu "${menustr}" "${TTY_Y}" "${TTY_X}" $((TTY_Y - 8))  \
-			  --cancel-button Exit --ok-button Select "${options[@]}" \
-			  3>&1 1>&2 2>&3)
-
-	unset options
-	[[ -z $BUILD_OPT ]] && exit_with_error "No option selected"
-	[[ $BUILD_OPT == rootfs ]] && ROOT_FS_CREATE_ONLY="yes"
-fi
-
-
-
-
-if [[ ${BUILD_OPT} =~ kernel|image ]]; then
-
-	if [[ -z $KERNEL_CONFIGURE ]]; then
-
-		options+=("no" "Do not change the kernel configuration")
-		options+=("yes" "Show a kernel configuration menu before compilation")
-
-		menustr="Select the kernel configuration."
-		KERNEL_CONFIGURE=$(whiptail --title "${titlestr}" --backtitle "$backtitle" --notags \
-						 --menu "${menustr}" $TTY_Y $TTY_X $((TTY_Y - 8)) \
-						 --cancel-button Exit --ok-button Select "${options[@]}" \
-						 3>&1 1>&2 2>&3)
-
-		unset options
-		[[ -z $KERNEL_CONFIGURE ]] && exit_with_error "No option selected"
-	fi
-fi
-
-
-

 if [[ -z $BOARD ]]; then

@ -246,6 +206,7 @@ if [[ -z $BOARD ]]; then
 	options+=("orangepi5plus"                 "Rockchip  RK3588 octa core 4-32GB RAM 2.5GBE USB3 USB-C WiFi/BT NVMe eMMC")
 	options+=("orangepicm4"                 "Rockchip  RK3566 quad core 2-8GB RAM GBE eMMC USB3 NvMe WiFi/BT")
 	options+=("orangepi3b"                  "Rockchip  RK3566 quad core 2-8GB RAM GBE eMMC USB3 NvMe WiFi/BT")
+	options+=("orangepi6plus"                 "Cix P1 12-core 16-64GB RAM 5GBE USB3 USB-C WiFi/BT NVMe")
 	options+=("orangepirv"                  "Starfive  JH7110 quad core 2-8GB RAM GBE USB3 NvMe WiFi/BT")
 	options+=("orangepirv2"                  "Ky X1 octa core 2-8GB RAM GBE USB3 WiFi/BT NVMe eMMC")
 	#options+=("orangepir2s"                  "Ky X1 octa core 2-8GB RAM 2.5GBE USB3 eMMC")
@ -269,6 +230,55 @@ LINUXFAMILY="${BOARDFAMILY}"

 [[ -z $KERNEL_TARGET ]] && exit_with_error "Board configuration does not define valid kernel config"

+# if BUILD_OPT, KERNEL_CONFIGURE, BOARD, BRANCH or RELEASE are not set, display selection menu
+if [[ -z $BUILD_OPT ]]; then
+
+	if [[ $BOARDFAMILY != "cix" ]]; then
+		options+=("u-boot"	 "U-boot package")
+	fi
+	options+=("kernel"	 "Kernel package")
+	options+=("rootfs"	 "Rootfs and all deb packages")
+	options+=("image"	 "Full OS image for flashing")
+
+	if [[ $BOARDFAMILY != "cix" ]]; then
+		menustr="Compile image | rootfs | kernel | u-boot"
+	else
+		menustr="Compile image | rootfs | kernel"
+	fi
+	BUILD_OPT=$(whiptail --title "${titlestr}" --backtitle "${backtitle}" --notags \
+			  --menu "${menustr}" "${TTY_Y}" "${TTY_X}" $((TTY_Y - 8))  \
+			  --cancel-button Exit --ok-button Select "${options[@]}" \
+			  3>&1 1>&2 2>&3)
+
+	unset options
+	[[ -z $BUILD_OPT ]] && exit_with_error "No option selected"
+	[[ $BUILD_OPT == rootfs ]] && ROOT_FS_CREATE_ONLY="yes"
+fi
+
+
+
+
+if [[ ${BUILD_OPT} =~ kernel|image ]]; then
+
+	if [[ -z $KERNEL_CONFIGURE ]]; then
+
+		options+=("no" "Do not change the kernel configuration")
+		options+=("yes" "Show a kernel configuration menu before compilation")
+
+		menustr="Select the kernel configuration."
+		KERNEL_CONFIGURE=$(whiptail --title "${titlestr}" --backtitle "$backtitle" --notags \
+						 --menu "${menustr}" $TTY_Y $TTY_X $((TTY_Y - 8)) \
+						 --cancel-button Exit --ok-button Select "${options[@]}" \
+						 3>&1 1>&2 2>&3)
+
+		unset options
+		[[ -z $KERNEL_CONFIGURE ]] && exit_with_error "No option selected"
+	fi
+fi
+
+
+
+
 if [[ -z $BRANCH ]]; then

 	options=()
@ -438,7 +448,18 @@ if [[ ${IGNORE_UPDATES} != yes ]]; then

 	display_alert "Downloading sources" "" "info"

-	[[ $BUILD_OPT =~ u-boot|image ]] && fetch_from_repo "$BOOTSOURCE" "$BOOTDIR" "$BOOTBRANCH" "yes"
+	if [[ $BOARDFAMILY != "cix" ]]; then
+
+		[[ $BUILD_OPT =~ u-boot|image ]] && fetch_from_repo "$BOOTSOURCE" "$BOOTDIR" "$BOOTBRANCH" "yes"
+
+	fi
+
+	if [[ $BOARDFAMILY == "cix" ]]; then
+
+		fetch_from_repo "https://github.com/orangepi-xunlong/component_cix-$BRANCH.git" "${EXTER}/cache/sources/component_cix-$BRANCH" "branch:main"
+
+	fi
+
 	[[ $BUILD_OPT =~ kernel|image ]] && fetch_from_repo "$KERNELSOURCE" "$KERNELDIR" "$KERNELBRANCH" "yes"

 	if [[ -n ${ATFSOURCE} ]]; then
@ -520,18 +541,20 @@ done
 # Compile u-boot if packed .deb does not exist or use the one from Orange Pi
 if [[ $BUILD_OPT == u-boot || $BUILD_OPT == image ]]; then

-	if [[ ! -f "${DEB_STORAGE}"/u-boot/${CHOSEN_UBOOT}_${REVISION}_${ARCH}.deb ]]; then
+	if [[ $BOARDFAMILY != "cix" ]]; then
+		if [[ ! -f "${DEB_STORAGE}"/u-boot/${CHOSEN_UBOOT}_${REVISION}_${ARCH}.deb ]]; then

-		[[ -n "${ATFSOURCE}" && "${REPOSITORY_INSTALL}" != *u-boot* ]] && compile_atf
-		
-		[[ ${REPOSITORY_INSTALL} != *u-boot* ]] && compile_uboot
-	fi
+			[[ -n "${ATFSOURCE}" && "${REPOSITORY_INSTALL}" != *u-boot* ]] && compile_atf

-	if [[ $BUILD_OPT == "u-boot" ]]; then
-		unset BUILD_MINIMAL BUILD_DESKTOP COMPRESS_OUTPUTIMAGE
-		display_alert "U-boot build done" "@host" "info"
-		display_alert "Target directory" "${DEB_STORAGE}/u-boot" "info"
-		display_alert "File name" "${CHOSEN_UBOOT}_${REVISION}_${ARCH}.deb" "info"
+			[[ ${REPOSITORY_INSTALL} != *u-boot* ]] && compile_uboot
+		fi
+
+		if [[ $BUILD_OPT == "u-boot" ]]; then
+			unset BUILD_MINIMAL BUILD_DESKTOP COMPRESS_OUTPUTIMAGE
+			display_alert "U-boot build done" "@host" "info"
+			display_alert "Target directory" "${DEB_STORAGE}/u-boot" "info"
+			display_alert "File name" "${CHOSEN_UBOOT}_${REVISION}_${ARCH}.deb" "info"
+		fi
 	fi
 fi

@ -567,7 +590,7 @@ if [[ $BUILD_OPT == rootfs || $BUILD_OPT == image ]]; then
 	fi

 	# Compile plymouth-theme-orangepi if packed .deb does not exist or use the one from repository
-	if [[ ! -f ${DEB_STORAGE}/plymouth-theme-orangepi_${REVISION}_all.deb ]]; then
+	if [[ ! -f ${DEB_STORAGE}/plymouth-theme-orangepi_${REVISION}_all.deb && $PLYMOUTH == yes ]]; then

 		[[ "${REPOSITORY_INSTALL}" != *plymouth-theme-orangepi* ]] && compile_plymouth-theme-orangepi
 	fi
				`@ -0,0 +1 @@`
				`db962c19a1737d10bcf14e18a8bc66e4 arm-gnu-toolchain-12.3.rel1-x86_64-aarch64-none-linux-gnu.tar.xz`
				`@ -0,0 +1,2 @@`
				`gst-launch-1.0 v4l2src device=/dev/video1 ! videoconvert ! autovideosink`