OrangePi_CM5

Commit Graph

Author	SHA1	Message	Date
Quentin Schulz	15324652f6	MIPS: dts: ocelot: describe the load/save GPIO This patch adds a description of the load/save GPIN pin, used in the VSC8584 PHY for timestamping operations. The related pinctrl description is also added. Signed-off-by: Quentin Schulz <quentin.schulz@bootlin.com> Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>	2020-06-24 14:33:16 -07:00
Quentin Schulz	116edf6e52	MIPS: mscc: add DT for Ocelot PCB120 The Ocelot PCB120 evaluation board is different from the PCB123 in that it has 4 external VSC8584 (or VSC8574) PHYs. It uses the SoC's second MDIO bus for external PHYs which have a reversed address on the bus (i.e. PHY4 is on address 3, PHY5 is on address 2, PHY6 on 1 and PHY7 on 0). Here is how the PHYs are connected to the switch ports: port 0: phy0 (internal) port 1: phy1 (internal) port 2: phy2 (internal) port 3: phy3 (internal) port 4: phy7 port 5: phy4 port 6: phy6 port 9: phy5 Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Quentin Schulz <quentin.schulz@bootlin.com> Signed-off-by: Paul Burton <paul.burton@mips.com> Patchwork: https://patchwork.linux-mips.org/patch/20869/ Cc: ralf@linux-mips.org Cc: jhogan@kernel.org Cc: robh+dt@kernel.org Cc: mark.rutland@arm.com Cc: davem@davemloft.net Cc: andrew@lunn.ch Cc: f.fainelli@gmail.com Cc: allan.nielsen@microchip.com Cc: linux-mips@linux-mips.org Cc: devicetree@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: netdev@vger.kernel.org Cc: thomas.petazzoni@bootlin.com Cc: antoine.tenart@bootlin.com	2018-10-09 10:37:27 -07:00

Author

SHA1

Message

Date

Quentin Schulz

15324652f6

MIPS: dts: ocelot: describe the load/save GPIO

This patch adds a description of the load/save GPIN pin, used in the
VSC8584 PHY for timestamping operations. The related pinctrl description
is also added.

Signed-off-by: Quentin Schulz <quentin.schulz@bootlin.com>
Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

2020-06-24 14:33:16 -07:00

Quentin Schulz

116edf6e52

MIPS: mscc: add DT for Ocelot PCB120

The Ocelot PCB120 evaluation board is different from the PCB123 in that
it has 4 external VSC8584 (or VSC8574) PHYs.

It uses the SoC's second MDIO bus for external PHYs which have a
reversed address on the bus (i.e. PHY4 is on address 3, PHY5 is on
address 2, PHY6 on 1 and PHY7 on 0).

Here is how the PHYs are connected to the switch ports:
port 0: phy0 (internal)
port 1: phy1 (internal)
port 2: phy2 (internal)
port 3: phy3 (internal)
port 4: phy7
port 5: phy4
port 6: phy6
port 9: phy5

Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Quentin Schulz <quentin.schulz@bootlin.com>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Patchwork: https://patchwork.linux-mips.org/patch/20869/
Cc: ralf@linux-mips.org
Cc: jhogan@kernel.org
Cc: robh+dt@kernel.org
Cc: mark.rutland@arm.com
Cc: davem@davemloft.net
Cc: andrew@lunn.ch
Cc: f.fainelli@gmail.com
Cc: allan.nielsen@microchip.com
Cc: linux-mips@linux-mips.org
Cc: devicetree@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: netdev@vger.kernel.org
Cc: thomas.petazzoni@bootlin.com
Cc: antoine.tenart@bootlin.com

2018-10-09 10:37:27 -07:00

2 Commits