63 lines
2.6 KiB
Plaintext
63 lines
2.6 KiB
Plaintext
# overlays fixup script
|
|
# implements (or rather substitutes) overlay arguments functionality
|
|
# using u-boot scripting, environment variables and "fdt" command
|
|
|
|
#setenv decompose_pin 'setexpr tmp_pinctrl sub "GPIO(0|1|2|3|4)_\\S\\d+" "\\1";
|
|
#setexpr tmp_bank sub "GPIO\\d_(\\S)\\d+" "\\1";
|
|
#test "${tmp_bank}" = "A" && setenv tmp_bank 0;
|
|
#test "${tmp_bank}" = "B" && setenv tmp_bank 1;
|
|
#test "${tmp_bank}" = "C" && setenv tmp_bank 2;
|
|
#test "${tmp_bank}" = "D" && setenv tmp_bank 3;
|
|
#setexpr tmp_pin sub "GPIO\\d_\\S(\\d+)" "\\1";
|
|
#setexpr tmp_bank ${tmp_bank} * 8;
|
|
#setexpr tmp_pin ${tmp_bank} + ${tmp_pin}'
|
|
#
|
|
#
|
|
#if test -n "${param_spinor_spi_bus}"; then
|
|
# test "${param_spinor_spi_bus}" = "0" && setenv tmp_spi_path "spi@ff1c0000"
|
|
# test "${param_spinor_spi_bus}" = "1" && setenv tmp_spi_path "spi@ff1d0000"
|
|
# test "${param_spinor_spi_bus}" = "2" && setenv tmp_spi_path "spi@ff1e0000"
|
|
# test "${param_spinor_spi_bus}" = "3" && setenv tmp_spi_path "spi@ff1f0000"
|
|
# fdt set /${tmp_spi_path} status "okay"
|
|
# fdt set /${tmp_spi_path}/spiflash@0 status "okay"
|
|
# if test -n "${param_spinor_max_freq}"; then
|
|
# fdt set /${tmp_spi_path}/spiflash@0 spi-max-frequency "<${param_spinor_max_freq}>"
|
|
# fi
|
|
# if test "${param_spinor_spi_cs}" = "1"; then
|
|
# fdt set /${tmp_spi_path}/spiflash@0 reg "<1>"
|
|
# fi
|
|
# env delete tmp_spi_path
|
|
#fi
|
|
#
|
|
#if test -n "${param_spidev_spi_bus}"; then
|
|
# test "${param_spidev_spi_bus}" = "0" && setenv tmp_spi_path "spi@ff1c0000"
|
|
# test "${param_spidev_spi_bus}" = "1" && setenv tmp_spi_path "spi@ff1d0000"
|
|
# test "${param_spidev_spi_bus}" = "2" && setenv tmp_spi_path "spi@ff1e0000"
|
|
# test "${param_spidev_spi_bus}" = "3" && setenv tmp_spi_path "spi@ff1f0000"
|
|
# fdt set /${tmp_spi_path} status "okay"
|
|
# fdt set /${tmp_spi_path}/spidev status "okay"
|
|
# if test -n "${param_spidev_max_freq}"; then
|
|
# fdt set /${tmp_spi_path}/spidev spi-max-frequency "<${param_spidev_max_freq}>"
|
|
# fi
|
|
# if test "${param_spidev_spi_cs}" = "1"; then
|
|
# fdt set /${tmp_spi_path}/spidev reg "<1>";
|
|
# fi
|
|
#fi
|
|
#
|
|
#if test -n "${param_w1_pin}"; then
|
|
# setenv tmp_pinctrl "${param_w1_pin}"
|
|
# setenv tmp_bank "${param_w1_pin}"
|
|
# setenv tmp_pin "${param_w1_pin}"
|
|
# run decompose_pin
|
|
# #echo "${param_w1_pin} ---> pinctrl = ${tmp_pinctrl}"
|
|
# #echo "${param_w1_pin} ---> bank = ${tmp_bank}"
|
|
# #echo "${param_w1_pin} ---> pin = ${tmp_pin}"
|
|
# fdt get value tmp_pinctrl /__symbols__ gpio${tmp_pinctrl}
|
|
# #echo "${param_w1_pin} ---> tmp_pinctrl = ${tmp_pinctrl}"
|
|
# fdt get value tmp_phandle ${tmp_pinctrl} phandle
|
|
# #echo "${param_w1_pin} ---> tmp_phandle = ${tmp_phandle}"
|
|
# fdt set /onewire@0 gpios "<${tmp_phandle} 0x000000${tmp_pin} 0 0>"
|
|
# env delete tmp_pinctrl tmp_bank tmp_pin tmp_phandle
|
|
#fi
|
|
#
|