OrangePi_CM5/drivers/scsi/isci
Yufen Yu 0d7596a954 scsi: libsas: Add LUN number check in .slave_alloc callback
[ Upstream commit 49da96d77938db21864dae6b7736b71e96c1d203 ]

Offlining a SATA device connected to a hisi SAS controller and then
scanning the host will result in detecting 255 non-existent devices:

  # lsscsi
  [2:0:0:0]    disk    ATA      Samsung SSD 860  2B6Q  /dev/sda
  [2:0:1:0]    disk    ATA      WDC WD2003FYYS-3 1D01  /dev/sdb
  [2:0:2:0]    disk    SEAGATE  ST600MM0006      B001  /dev/sdc
  # echo "offline" > /sys/block/sdb/device/state
  # echo "- - -" > /sys/class/scsi_host/host2/scan
  # lsscsi
  [2:0:0:0]    disk    ATA      Samsung SSD 860  2B6Q  /dev/sda
  [2:0:1:0]    disk    ATA      WDC WD2003FYYS-3 1D01  /dev/sdb
  [2:0:1:1]    disk    ATA      WDC WD2003FYYS-3 1D01  /dev/sdh
  ...
  [2:0:1:255]  disk    ATA      WDC WD2003FYYS-3 1D01  /dev/sdjb

After a REPORT LUN command issued to the offline device fails, the SCSI
midlayer tries to do a sequential scan of all devices whose LUN number is
not 0. However, SATA does not support LUN numbers at all.

Introduce a generic sas_slave_alloc() handler which will return -ENXIO for
SATA devices if the requested LUN number is larger than 0 and make libsas
drivers use this function as their .slave_alloc callback.

Link: https://lore.kernel.org/r/20210622034037.1467088-1-yuyufen@huawei.com
Reported-by: Wu Bo <wubo40@huawei.com>
Suggested-by: John Garry <john.garry@huawei.com>
Reviewed-by: John Garry <john.garry@huawei.com>
Reviewed-by: Jason Yan <yanaijie@huawei.com>
Signed-off-by: Yufen Yu <yuyufen@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-25 14:36:16 +02:00
..
Makefile
…
host.c
…
host.h
…
init.c scsi: libsas: Add LUN number check in .slave_alloc callback 2021-07-25 14:36:16 +02:00
isci.h
…
phy.c
…
phy.h
…
port.c scsi: isci: Pass gfp_t flags in isci_port_bc_change_received() 2021-03-25 09:04:12 +01:00
port.h
…
port_config.c
…
probe_roms.c
…
probe_roms.h
…
registers.h
…
remote_device.c
…
remote_device.h
…
remote_node_context.c
…
remote_node_context.h
…
remote_node_table.c
…
remote_node_table.h
…
request.c
…
request.h
…
sas.h
…
scu_completion_codes.h
…
scu_event_codes.h
…
scu_remote_node_context.h
…
scu_task_context.h
…
task.c
…
task.h
…
unsolicited_frame_control.c
…
unsolicited_frame_control.h
…