QQT912

History

yuquanjun e995e514da Rename project paths to ASCII for Keil ARMCC compatibility Co-authored-by: Cursor <cursoragent@cursor.com>		2026-07-05 04:49:23 +08:00
..
EWARM	Rename project paths to ASCII for Keil ARMCC compatibility	2026-07-05 04:49:23 +08:00
MDK	Rename project paths to ASCII for Keil ARMCC compatibility	2026-07-05 04:49:23 +08:00
USER	Rename project paths to ASCII for Keil ARMCC compatibility	2026-07-05 04:49:23 +08:00
readme.txt	Rename project paths to ASCII for Keil ARMCC compatibility	2026-07-05 04:49:23 +08:00

readme.txt

This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

示例目的：
          对MCU内置的FLASH的最后一个页面（第127页）依次进行擦除/写/读操作，并对比写入和读取的数据是否一致。

硬件资源：
          1. CW32F030C8T6 StartKit  或者CW32F030CxT6 StartKit
          2. 时钟HSI
          3. 系统时钟设置为HSI时钟6分频，8MHz， PCLK、HCLK不分频，PCLK=HCLK=SysClk=8MHz

演示说明：
        采用默认时钟配置，开启FLASH的操作时钟。依次对MCU内置FLASH的最后一个页面（127页）进行擦除、写以及读取，然后对比写入和读取的数据是否相同。如果擦除、写、读取数据操作或者读写数据不一致则挂起，否则完成后会闪灯提示。

使用说明：
+ EWARM
          1. 打开project.eww文件
          2. 编译所有文件：Project->Rebuild all
          3. 载入工程镜像：Project->Debug
          4. 运行程序：Debug->Go(F5)

+ MDK-ARM
          1. 打开project.uvproj文件
          2. 编译所有文件：Project->Rebuild all target files
          3. 载入工程镜像：Debug->Start/Stop Debug Session
          4. 运行程序：Debug->Run(F5)

readme.txt Unescape Escape

readme.txt